1. Select “Check Design Rules” and double click.

2. Screen after double clicking on “Check Design Rules”

3. Select Launch ModelSim

4. The screen after double clicking on Launch ModelSim

5. Assign values to the input signals. Select signal ‘a’ on the “signal” pop up and click edit. You can “force” the signal to 1 or 0, or choose clock and choose a period of 1000 for example. Do the same for signal ‘b’ and select 2000 for the period.

6. Assign value for signal b, select a clock with a period of 2000 (double the period of ‘a’.

7. Waveforms after clicking “run” on the waveform pop-up.