1. MICE Tracker workshop, 06Nov. 20061 Waveguides for Station5 H. Sakamoto / M. Yoshida

2. MICE Tracker workshop, 06Nov. 20062 G.Barber 1400 mm

3. MICE Tracker workshop, 06Nov. 20063 External waveguide 2900  29 mm 2100mm 1 2 3 4 5 6 7 8 121 122 … 128 12 11 … … 1 128 … 121

4. MICE Tracker workshop, 06Nov. 20064 1 2 3 4 5 6 7 8 121 122 123 124 125 126 127 128 External waveguide Polished face Mirrored Numbering

5. MICE Tracker workshop, 06Nov. 20065 Production process 1.Cut 2.Assembly with testing cookie 1.All connectors are set in fiber bundle ( including internal&external ) 2.Mapping is completed at this step. 3.Polish 4.1 st transmission test 5.Cutting testing cookie away 6.Glueing and making internal.& external. separately. 7.Polish 8.2 nd transmission test 9.Shipping to FNAL toward final polishing. -> Imperial College.

6. MICE Tracker workshop, 06Nov. 20066 Assembling scheme D0 connector Testing cookie Elastic bands Station connector External region Internal region Table

7. MICE Tracker workshop, 06Nov. 20067 Plans Bulkhead connectors will arrive at G-Tech at beginning of November? Assembly with test cookie (previous slide) ~1 week Transmission test @ G-Tech factory ~1 day –Now, Takatomi is tuning the testing method at Osaka Univ. First module will complete at End of November ~1 week Production assessment test ~1 day –Check stress on fibers –Final transmission test. Complete the remaining modules ( 4 modules ) ~2 week