1. EECC722 - Shaaban #1 lec # 10 Fall 2006 10-25-2006 Data/Thread Level Speculation (TLS) in the Stanford Hydra Chip Multiprocessor (CMP) Hydra ia a 4-core Chip Multiprocessor (CMP) based microarchitecture/compiler effort at Stanford that provides hardware/software support for Data/Thread Level Speculation (TLS) to extract parallel speculated threads from sequential code (single thread) augmented with software thread speculation handlers. (Primary Hydra papers: 4, 6) Stanford Hydra, discussed here, is one TLS architecture example. Other TLS Architectures include: - Wisconsin Multiscalar - Carnegie-Mellon Stampede - MIT M-machine

2. EECC722 - Shaaban #2 lec # 10 Fall 2006 10-25-2006 Motivation for Chip Multiprocessors (CMPs) Chip Multiprocessors (CMPs) offers implementation benefits: –High-speed signals are localized in individual CPUs –A proven CPU design is replicated across the die (including SMT processors, e.g IBM Power 5) Overcomes diminishing performance/transistor return problem (limited- ILP) in single-threaded superscalar processors (similar motivation for SMT) –Transistors are used today mostly for ILP extraction –CMPs use transistors to run multiple threads (exploit thread level parallelism, TLP): On parallelized (multi-threaded) programs With multi-programmed workloads (multi-tasking) –A number of single-threaded applications executing on different CPUs Fast inter-processor communication eases parallelization of code (Using shared L2 cache) Potential Drawback of CMPs: High power/heat issues using current VLSI processes. But slower than logical processor communication in SMT Results in reduced CMP clock rate

3. EECC722 - Shaaban #3 lec # 10 Fall 2006 10-25-2006 Stanford Hydra CMP Approach Goals Exploit all levels of program parallelism. Develop a single-chip multiprocessor architecture that simplifies microprocessor design and achieves high performance. Make the multiprocessor transparent to the average user. Integrate use of parallelizing compiler technology in the design of microarchitecture that supports data/thread level speculation (TLS). Within a single CPU core On multiple CPU cores within a single CMP or multiple CMPs On multiple CPU cores within a single CMP using Thread Level Speculation (TLS) Coarse Grain Fine Grain

4. EECC722 - Shaaban #4 lec # 10 Fall 2006 10-25-2006 Hydra Prototype Overview 4 CPU cores with modified private L1 caches. Speculative coprocessor (for each processor core) –Speculative memory reference controller –Speculative interrupt screening mechanism –Statistics mechanisms for performance evaluation and to allow feedback for code tuning Memory system –Read and write buses –Controllers for all resources –On-chip shared L2 cache –L2 Speculation write buffers. –Simple off-chip main memory controller –I/O and debugging interface

5. EECC722 - Shaaban #5 lec # 10 Fall 2006 10-25-2006 The Basic Hydra CMP 4 processor cores and shared secondary (L2) cache on a chip 2 buses connect processors and memory Cache Coherence: writes are broadcast on write bus L2

6. EECC722 - Shaaban #6 lec # 10 Fall 2006 10-25-2006 Hydra Memory Hierarchy Characteristics

7. EECC722 - Shaaban #7 lec # 10 Fall 2006 10-25-2006 Hydra Prototype Layout 250 MHz clock rate target Shared L2 Speculation Write Buffers Circa ~ 1999 D-L1 I-L1 Private Split L1 caches Per core

8. EECC722 - Shaaban #8 lec # 10 Fall 2006 10-25-2006 CMP Parallel Performance Varying levels of performance: 1.Multiprogrammed workloads work well 2.Very parallel apps (matrix-based FP and multimedia) are excellent 3.Acceptable only with a few less parallel (i.e. integer) general applications Results given here are without Thread Level Speculation (TLS) Thread Level Speculation (TLS) Target Applications High Data Parallelism/LLP 321

9. EECC722 - Shaaban #9 lec # 10 Fall 2006 10-25-2006 The Parallelization Problem Current automated parallelization software (parallel compilers) is limited –Parallel compilers are generally successful for scientific applications with statically known dependencies (e.g dense matrix computations). –Automated parallization of general-purpose applications provides poor parallel performance especially for integer applications due to ambiguous dependencies resulting from: Significant pointer use: Pointer aliasing (Pointer disambiguation problem) Dynamic loop limits Complex control flow Irregular array accesses Inter-procedural dependencies –Ambiguous dependencies limit extracted parallelism/performance: Complicate static dependency analysis Introduce imprecision into dependence relations Force conservative performance-degrading synchronization to safely handle potential dependencies. Parallelism may exist in algorithm, but code hides it. Manual parallelization can provide good performance on a much wider range of applications: –Requires different initial program design/data structures/algorithms –Programmers with additional skills. – Handling ambiguous dependencies present in general-purpose applications may still force conservative synchronization greatly limiting parallel performance Can hardware help the situation? High Data Parallelism/LLP Hardware Supported Thread Level Speculation

10. EECC722 - Shaaban #10 lec # 10 Fall 2006 10-25-2006 Possible Limited Parallel Software Solution: Data Speculation & Thread Level Speculation (TLS) Data speculation and Thread Level Speculation (TLS) enable parallelization without regard for data dependencies –Normal sequential program is broken up into speculative threads –Speculative threads are now run in parallel on multiple physical CPUs (e.g. CMP) and/or logical CPUs (e.g. SMT). –Speculation hardware (TLS processor) architecture ensures correctness Parallel software implications –Loop parallelization is now easily automated –Ambiguous dependencies resolved dynamically without conservative synchronization –More “arbitrary” threads are possible (subroutines) –Add synchronization only for performance Thread Level Speculation (TLS) hardware support mechanisms –Speculative thread control mechanism –Five basic speculation hardware/memory system requirements for correct data/thread speculation e.g Speculative thread creation, restart, termination.. Given later in slide 21

11. EECC722 - Shaaban #11 lec # 10 Fall 2006 10-25-2006 Subroutine Thread Speculation Speculated Thread Speculated threads communicate results through shared memory locations

12. EECC722 - Shaaban #12 lec # 10 Fall 2006 10-25-2006 Loop Iteration Speculative Threads A Simple example of a speculatively executed loop using Data/Thread Level Speculation (TLS) Original Sequential (Single Thread) Loop Speculated Threads Most common Application of TLS Shown here one iteration per speculated thread Speculated threads communicate results through shared memory locations

13. EECC722 - Shaaban #13 lec # 10 Fall 2006 10-25-2006 Speculative Thread Creation in Hydra Register Passing Buffer (RPB)

14. EECC722 - Shaaban #14 lec # 10 Fall 2006 10-25-2006 Hydra’s Data & Thread Speculation Operations Speculated threads must commit results in order

15. EECC722 - Shaaban #15 lec # 10 Fall 2006 10-25-2006 Hydra Loop Compiling for Speculation Create Speculated Threads

16. EECC722 - Shaaban #16 lec # 10 Fall 2006 10-25-2006 Overview of Loop-Iteration Thread Speculation Parallel regions (loop iterations) are annotated by the compiler. –e.g. Begin_Speculation … End_Speculation The hardware uses these annotations to run loop iterations in parallel as speculated threads on a number of CPU cores. Each CPU core knows which loop iteration it is running. CPUs dynamically prevent data/name dependency violations: –“later” iterations can’t use data before write by “earlier” iterations (Prevent data dependency violation, RAW hazard) –“earlier” iterations never see writes by “later” iterations (WAW, WAR hazards prevented): Multiple views of memory are created by TLS hardware If a “later” iteration (more speculated thread) has used data that an “earlier” iteration (less speculated thread) writes before data is actually written (data dependency violation, RAW hazard), the later iteration is restarted –All following iterations are halted and restarted, also. –All writes by the later iteration are discarded (undo speculated work). Memory Renaming A later iteration is assigned a more speculated thread Speculated threads communicate results through shared memory locations How?

17. EECC722 - Shaaban #17 lec # 10 Fall 2006 10-25-2006 Loop Execution with Thread Speculation Data Dependency Violation (RAW hazard) Data Dependency Violation (RAW hazard) Handling Example If a “later” iteration (more speculated thread) has used data that an “earlier” iteration (less speculated thread) writes before data is actually written (data dependency violation, RAW hazard), the later iteration is restarted –All following iterations are halted and restarted, also. –All writes by the later iteration are discarded (undo speculated work). Value read too early Earlier (less speculative) thread Later (more speculative) thread Speculated threads communicate results through shared memory locations

18. EECC722 - Shaaban #18 lec # 10 Fall 2006 10-25-2006 Data Hazard/Dependence Classification I (Write) Shared Name J (Read) Read after Write (RAW) if data dependence is violated I (Read) Shared Name J (Write) Write after Read (WAR) if antidependence is violated I (Read) Shared Name J (Read) Read after Read (RAR) not a hazard I (Write) Shared Name J (Write) Write after Write (WAW) if output dependence is violated A name dependence: output dependence A name dependence: antidependence I.. J Program Order No dependence True Data Dependence Name: Register or Memory Location e.g. S.D. F4, 0(R1) e.g L.D. F6, 0(R1) e.g. S.D. F4, 0(R1) e.g. S.D. F6, 0(R1) e.g. L.D. F6, 0(R1) e.g. S.D. F4, 0(R1) e.g. L.D. F6, 0(R1) e.g. L.D. F4, 0(R1) Here, speculated threads communicate results through shared memory locations

19. EECC722 - Shaaban #19 lec # 10 Fall 2006 10-25-2006 Speculative Data Access in Speculated Threads i Less Speculated thread i+1 More speculated thread WAR RAW WAW i i+1 Write by i+1 Not seen by i Access in correct program order to same memory location i before i+1 Reversed access order to same memory location i+1 before i Speculated threads communicate results through shared memory locations Data Dep. violation

20. EECC722 - Shaaban #20 lec # 10 Fall 2006 10-25-2006 To provide the desired memory behavior, the data/thread speculation hardware must provide: 1. A method for detecting true memory dependencies, in order to determine when a dependency has been violated (RAW hazard). 2. A method for backing up and re-executing speculative loads and any instructions that may be dependent upon them when the load causes a violation. 3. A method for buffering any data written during a speculative region of a program so that it may be discarded when a violation occurs or permanently committed at the right time. Speculative Data Access in Speculated Threads i.e RAW hazard i.e when thread is no longer speculated and in correct program order

21. EECC722 - Shaaban #21 lec # 10 Fall 2006 10-25-2006 Five Basic Speculation Hardware Requirements For Correct Data/Thread Speculation 1. Forward data between parallel threads (Prevent RAW). A speculative system must be able to forward shared data quickly and efficiently from an earlier thread running on one processor to a later thread running on another. 2. Detect when reads occur too early (RAW hazard occurred ). If a data value is read by a later thread and subsequently written by an earlier thread, the hardware must notice that the read retrieved incorrect data since a true dependence violation (RAW hazard) has occurred. 3. Safely discard speculative state after violations (RAW hazards). All speculative changes to the machine state must be discarded after a violation, while no permanent machine state may be lost in the process. 4. Retire speculative writes in the correct order (Prevent WAW hazards). Once speculative threads have completed successfully (no longer speculative), their state must be added (committed) to the permanent state of the machine in the correct program order, considering the original sequencing of the threads. 5. Provide memory renaming (Prevent WAR hazards). The speculative hardware must ensure that the older thread cannot “see” any changes made by later threads, as these would not have occurred yet in the original sequential program. (i.g. Multiple views of memory)

22. EECC722 - Shaaban #22 lec # 10 Fall 2006 10-25-2006 Speculative Hardware/Memory Requirements 1-2 (prevent RAW) (RAW hazard or violation) 1 2 More Speculated Thread i +1 Read is too early Less Speculated Thread i

23. EECC722 - Shaaban #23 lec # 10 Fall 2006 10-25-2006 Speculative Hardware/Memory Requirements 3-4 (RAW hazard). (prevent WAW hazards) Restart 3 4 More Speculated Thread RAW Hazard Occurred/Detected Commit speculative writes in correct program order Commit

24. EECC722 - Shaaban #24 lec # 10 Fall 2006 10-25-2006 Speculative Hardware/Memory Requirement 5 Memory Renaming to prevent WAR hazards. Write X by i+1 not visible to less speculated threads (thread i here) (i.e. no WAR hazard) Less speculated Thread i More Speculated Thread i + 1 Even more Speculated Thread i + 2 Not visible to less speculated thread i 5 Memory Renaming

25. EECC722 - Shaaban #25 lec # 10 Fall 2006 10-25-2006 Hydra Thread Level Speculation (TLS) Hardware Speculation Coprocessor L2 Cache Speculation Write Buffers (one per core)

26. EECC722 - Shaaban #26 lec # 10 Fall 2006 10-25-2006 Hydra Thread Level Speculation (TLS) Support Multiple Memory views or Memory Renaming

27. EECC722 - Shaaban #27 lec # 10 Fall 2006 10-25-2006 L1 Cache Tag Details - Record writes of more speculated threads

28. EECC722 - Shaaban #28 lec # 10 Fall 2006 10-25-2006 L2 Speculation Write Buffer Details L2 speculation write buffers committed in L2 (which holds permanent non- speculative state ) in correct program order (when no longer speculative) To prevent WAW hazards (basic requirement 5)

29. EECC722 - Shaaban #29 lec # 10 Fall 2006 10-25-2006 The Operation of Speculative Loads Check First On L1 miss Check L2 Last On local Data L1 Miss: Do Not Check: More Speculated Later writes not visible (otherwise WAR) Less Speculative More Speculative L1 On local Data L1 Miss: First, check own and then less speculated (earlier) Write buffers then L2 cache This operation of speculative loads provides multiple memory views (memory renaming) where more speculative writes are not visible to less speculative threads which prevents WAR hazards (This satisfies basic speculative hardware/Memory requirement 4) and satisfies data dependencies (Requirement 1)

30. EECC722 - Shaaban #30 lec # 10 Fall 2006 10-25-2006 Reading L2 Cache Speculative Buffers Similar to last slide On local Data L1 Miss: First, check own and then less speculated (earlier) Write buffers then L2 cache On local Data L1 Miss: Do Not Check: More Speculated Later writes not visible (otherwise WAR) Speculative Load Operation:

31. EECC722 - Shaaban #31 lec # 10 Fall 2006 10-25-2006 The Operation of Speculative Stores Less Speculated More Speculated Similar to invalidate cache coherency protocols RAW Detection L2 speculation write buffers committed in L2 (which holds permanent non- speculative state ) in correct program order (when no longer speculative) (This satisfies basic speculative hardware/Memory requirement 5) Write to L1 and own L2 speculation write buffer (This satisfies basic speculative hardware/Memory requirements 2-3)

32. EECC722 - Shaaban #32 lec # 10 Fall 2006 10-25-2006 Hydra’s Handling of Five Basic Speculation Hardware Requirements For Correct Data/Thread Speculation 1. Forward data between parallel threads (RAW). –When a speculative thread writes data over the write bus, all more-speculative threads that may need the data have their current copy of that cache line invalidated. –This is similar to the way the system works during non- speculative operation (invalidate cache coherency protocol). –If any of the threads subsequently need the new speculative data forwarded to them, they will miss in their primary cache and access the secondary cache. The speculative data contained in the write buffers of the current or older threads replaces data returned from the secondary cache on a byte-by-byte basis just before the composite line is returned to the processor and primary cache. Speculative Load As seen earlier in slides 29-30 And own L2 write buffer and less speculated L2 buffers In primary cache (Data L1 cache)

33. EECC722 - Shaaban #33 lec # 10 Fall 2006 10-25-2006 2. Detect when reads occur too early (Detect RAW hazards). –Primary cache (Data L1) read bits are set to mark any reads that may cause violations. –Subsequently, if a write to that address from an earlier thread (less speculated) invalidates the address, a violation is detected, and the thread is restarted. 3. Safely discard speculative state after violations. –Since all permanent machine state in Hydra is always maintained within the secondary cache, anything in the primary caches and secondary cache speculation buffers may be invalidated at any time without risking a loss of permanent state. As a result, any lines in the primary cache containing speculative data (marked with a special modified bit) may simply be invalidated all at once to clear any speculative state from a primary cache. In parallel with this operation, the secondary cache buffer for the thread may be emptied to discard any speculative data written by the thread. Hydra’s Handling of Five Basic Speculation Hardware Requirements For Correct Data/Thread Speculation RAW hazards

34. EECC722 - Shaaban #34 lec # 10 Fall 2006 10-25-2006 4. Retire speculative writes in the correct order (Prevent WAW hazards). –Separate secondary cache speculation buffers are maintained for each thread. As long as these are drained (committed) into the secondary cache in the original program sequence of the threads, they will reorder speculative memory references correctly. 5. Provide memory renaming (Prevent WAR hazards). –Each processor can only read data written by itself or earlier threads (less speculated threads) when reading its own primary cache or the secondary cache speculation buffers. –Writes from later (more speculative) threads don’t cause immediate invalidations in the primary cache, since these writes should not be visible to earlier (less speculative) threads. –However, these “ignored” invalidations are recorded using an additional pre- invalidate primary cache bit associated with each line. This is because they must be processed before a different speculative or non-speculative thread executes on this processor. –If future threads have written to a particular line in the primary cache, the pre- invalidate bit for that line is set. When the current thread completes, these bits allow the processor to quickly simulate the effect of all stored invalidations caused by all writes from later processors all at once, before a new thread begins execution on this processor. Hydra’s Handling of Five Basic Speculation Hardware Requirements For Correct Data/Thread Speculation Multiple Memory Views As seen earlier in speculative load operation

35. EECC722 - Shaaban #35 lec # 10 Fall 2006 10-25-2006 Thread Speculation Performance Results representative of entire uniprocessor applications Simulated with accurate modeling of Hydra’s memory and hardware speculation support. (No TLS)

36. EECC722 - Shaaban #36 lec # 10 Fall 2006 10-25-2006 Hydra Conclusions Hydra offers a number of advantages –Good performance on parallel applications –Promising performance on difficult to parallelize sequential (single-threaded) applications using data/Thread Level Speculation (TLS) mechanisms. –Scalable, modular design –Low hardware overhead support for speculative thread parallelism, yet greatly increases the number of parallel applications.

37. EECC722 - Shaaban #37 lec # 10 Fall 2006 10-25-2006 Other Thread Level Speculation (TLS) Efforts: Wisconsin Multiscalar (1995) This CMP-based design proposed the first reasonable hardware to implement TLS. Unlike Hydra, Multiscalar implements a ring-like network between all of the processors to allow direct register-to-register communication. –Along with hardware-based thread sequencing, this type of communication allows much smaller threads to be exploited at the expense of more complex processor cores. The designers proposed two different speculative memory systems to support the Multiscalar core. –The first was a unified primary cache, or address resolution buffer (ARB). Unfortunately, the ARB has most of the complexity of Hydra’s secondary cache buffers at the primary cache level, making it difficult to implement. –Later, they proposed the speculative versioning cache (SVC). The SVC uses write-back primary caches to buffer speculative writes in the primary caches, using a sophisticated coherence scheme.

38. EECC722 - Shaaban #38 lec # 10 Fall 2006 10-25-2006 This CMP-with-TLS proposal is very similar to Hydra, –Including the use of software speculation handlers. However, the hardware is simpler than Hydra’s. The design uses write-back primary caches to buffer writes— similar to those in the SVC—and sophisticated compiler technology to explicitly mark all memory references that require forwarding to another speculative thread. Their simplified SVC must drain its speculative contents as each thread completes, unfortunately resulting in heavy bursts of bus activity. Other Thread Level Speculation (TLS) Efforts: Carnegie-Mellon Stampede

39. EECC722 - Shaaban #39 lec # 10 Fall 2006 10-25-2006 This CMP design has three processors that share a primary cache and can communicate register-to-register through a crossbar. Each processor can also switch dynamically among several threads. (TLS & SMT??) As a result, the hardware connecting processors together is quite complex and slow. However, programs executed on the M-machine can be parallelized using very fine-grain mechanisms that are impossible on an architecture that shares outside of the processor cores, like Hydra. Performance results show that on typical applications extremely fine-grained parallelization is often not as effective as parallelism at the levels that Hydra can exploit. The overhead incurred by frequent synchronizations reduces the effectiveness. Other Thread Level Speculation (TLS) Efforts: MIT M-machine