1. Venturing into protected-mode A first look at the CPU registers and instructions which provide the essential supporting infrastructure

2. A need for Diagnostics Upon entering protected-mode, the “rules” change regarding the allowed CPU actions Memory-addresses are computed using a different set of circuitry within the CPU Restrictions are enforced by generating a variety of “exceptions” which interrupt the CPU’s normal fetch-execute cycle We will need to “diagnose” their causes

3. Memory-addresses The first change programmers encounter when the CPU is switched into Protected Mode concerns the way in which the CPU constructs its memory-addresses (i.e., the segment registers play a different role) Some formerly “hidden” aspects of those segment-registers will come to the fore! (Some terminology also gets revised)

4. Real-Mode Addresses segment Logical Address: offset Operand’s effective address Physical Address: + x16 While in Real-Mode, the memory-segments are all 64-kilobytes in size (and readable/writable)

5. Protected-Mode Addresses segment-selector Logical Address: segment-offset Operand’s effective address Physical Address: descriptor Segment Descriptor Table + Segment Base-address (also Segment-Limit and Access Rights) Validity is checked by CPU

6. Segment-Descriptor Format Base[31..24]GD RSVRSV AVLAVL Limit [19..16] P DPLDPL SX C/DC/D R/WR/W ABase[23..16] Base[15..0]Limit[15..0] 6332 31 0 Several instances of this basic ‘segment-descriptor’ data-structure will occur in the Global Descriptor Table (and maybe also in some Local Descriptor Tables)

7. “Hidden” part of segment-registers selectorsegment basesegment limit access rights The programmer-visible part of a segment-register The “invisible” parts of a segment-register

8. Segment-Register “cache” The “hidden” portions of any segment- register will automatically be modified whenever any instruction places a new value in a segment-register’s visible part Examples (some obvious, some not): mov %ax, %ds# new value from a general register pop %es# new value from a word in memory lss tos, %esp# new value from a memory-pointer ljmp$0x07C0, $main# new value from “immediate” data int$0x13# new value from interrupt vector table lret# new value from the stack’s memory

9. Illegal segment-values In Real-Mode, any 16-bit value was ‘legal’ to be loaded into any segment-register But in Protected-Mode, the CPU doesn’t allow certain 16-bit values to be placed in certain particular segment-registers For example: the selector for a descriptor that isn’t ‘executable’ cannot go into CS, and one that’s legal for CS can’t go in SS

10. Special ‘system’ registers In protected-mode the CPU needs quick access to its important data-structures: –Memory-Segment Descriptors –Interrupt-Gate Descriptors –Call-Gate Descriptors –Task-State Descriptors –Page-Directory and Page-Table Descriptors So special CPU registers exist which are dedicated to locating those crucial items

11. GDT and IDT The two most vital system registers for protected-mode execution are: –GDTR (Global Descriptor Table Register) –IDTR (Interrupt Descriptor Table Register) Each of these is 48-bits wide and contains the base-address and segment-limit for an array of descriptors (the GDT and the IDT) Special instructions allow access to these registers: SGDT/LGDT and SIDT/LIDT Addendum: The widths of these registers are larger if cpu supports ia32e.

12. IA-32: 48-bit Register-Format Segment Base-Address Segment Limit 4716150 16 bits 32 bits

13. System Relationships descriptor Interrupt Descriptor Table Global Descriptor Table GDTR IDTR

14. LDT and TSS For protected-mode multitasking, the CPU needs to access two other data-structures: –The current Local Descriptor Table (LDT) –The current Task-State Segment (TSS) Again, special registers tell the CPU where to find these data-structures in memory (assuming protected-mode is enabled) And special instructions afford access to them: SLDT/LLDT and STR/LTR

15. Indirection Registers LDTR and TR are like segment- registers: they have a visible part (16-bits) and a “hidden” descriptor-cache part The programmer-visible portion of these two registers holds a “segment-selector” (i.e., an array-index into the GDT array) The hidden portion is updated from the GDT whenever these register get loaded

16. System Relationships Task State Segment descriptor GDTR descriptor Local Descriptor Table descriptor LDTR TR Global Descriptor Table

17. Reading LDTR and TR The LDTR and TR registers are not able to be accessed while executing in real-mode An “Undefined Opcode” exception (INT-6) will be generated if SLDT or STR opcodes are encountered in a “real-mode” program So to obtain the values in these registers, any bootsector program must temporarily enable protected-mode

18. Control Register 0 Register CR0 is the 32-bit version of the MSW register (Machine Status Word) It contains the PE-bit (Protection Enabled) –when PE=0 the CPU is in real-mode –when PE=1 the CPU is in protected-mode PGPG CDCD NWNW AMAM WPWP NENE ETET TSTS EMEM MPMP PEPE Machine Status Word

19. Using the LMSW instruction You can use the LMSW instruction to turn on the PE-bit (enabling ‘protected-mode’) But you cannot use LMSW to turn off PE (i.e., PE was a “sticky bit” in the 80286) The Intel 80386 processor introduced a new name and enlarged size for the MSW Special version of the ‘MOV’ instruction can either enable or disable the PE-bit

20. How to enter protected-mode This instruction-sequence turns on PE-bit: Warning: you have to do this with interrupts temporarily disabled -- since the real-mode Interrupt Vector Table won’t work any more mov %cr0, %eax# get current machine status bts $0, %eax# set the image of its PE-bit mov %eax, %cr0# now enter protected mode

21. How to leave protected-mode This instruction-sequence turns off PE-bit Warning: you need to make sure that all of the segment-registers have proper access- rights and segment-limits in their caches to function correctly once back in real-mode! mov %cr0, %eax# get current machine status btr $0, %eax# set the image of its PE-bit mov %eax, %cr0# now leave protected mode

22. An observation If we can enter protected-mode, but NOT do anything to alter any segment-register, then we won’t need to construct Tables of Segment-Descriptors The left-over ‘real-mode’ descriptor-values will still be in any segment-register’s cache Let’s pursue this idea in a program ‘demo’

23. In-class exercises Can you modify the ‘ourfirst.s’ program so it will display the following register-values (in hexadecimal format, showing names)? –The 32-bit control-register CR0 –The 48-bit system-register IDTR –The 16-bit segment-register TR