1. Getting the chip fabricated and tested Dr.K.S.Gurumurthy, Bangalore University Mr. Senthil Kumar, Kongu Engg College,Erode Dr.Tilak, GEC, AP Dr.Bhanu Bhaskara, JNTU, Hyderabad Dr.B.P.Harish, Bangalore University B.kalivaraprasad SVECW- bhimavaram(A.P)

2. 9-7-'08IUCEE WORKSHOP - VLSI DESIGN2 AGENDA Motivation What are the foundries available Semiconductor Complex Ltd., Chandigarh Summary

3. 9-7-'08IUCEE WORKSHOP - VLSI DESIGN3 Motivation To present an overview of the IC fabrication facilities available to Universities in India. To encourage faculty/students to tape out designs, for fabrication and characaterization, to demonstrate proof of concept.

4. 9-7-'08IUCEE WORKSHOP - VLSI DESIGN4 What are the foundries available? Semiconductor Complex Ltd., Chandigarh MOSIS, US Europractice, EU - AMIS - TSMC - Austria Microsystems - UMC

5. 9-7-'08IUCEE WORKSHOP - VLSI DESIGN5 The ‘India Chip Program’ is a program of Multi- Product Wafer runs at regular intervals at SCL. The program envisages to put different circuits from various designers on a common mask set and wafers, to reduce the cost of prototyping per design. Semiconductor Complex Ltd, Chandigarh

6. 9-7-'08IUCEE WORKSHOP - VLSI DESIGN6 Who can use India Chip Program? The India Chip Program is ideally suited for validating small circuit concepts being done by –Academic Institutions –Research Institutions –Entrepreneurs –Commercial Organisations

7. 9-7-'08IUCEE WORKSHOP - VLSI DESIGN7 IC Designers in the country can design circuits using SCL’s Design Kit that includes SCL’s Cell Library, Design Rules and Model Parameters. Using SCL’s Design Kit, IC Designers can do complete design of the circuit and generate GDSII data for mask fabrication. Mask fabrication, wafer fabrication and parametric testing shall be taken up by SCL.

8. 9-7-'08IUCEE WORKSHOP - VLSI DESIGN8 Flow Chart of the Activities of SCL

9. 9-7-'08IUCEE WORKSHOP - VLSI DESIGN9 How to send your design data to SCL? On conceptualization of the design the designer will send details about the design concept to SCL in a Preliminary Product Description Document. Once your design is complete SCL will accept design data in GDSII format. (If Cadence is used, please perform a stream-out with library version 3.0. Data may please be sent on CD or through email or through FTP).

10. 9-7-'08IUCEE WORKSHOP - VLSI DESIGN10 Charges for fabrication under India Chip Program SR.NO CHIP AREA sq mm. COST FOR 10 ENGG. AND 40 PROTOTYPES TESTED SAMPLES COST PER WAFER WITH NO PACKAGEING ADDITIONAL COST FOR CIRCUIT LAYOUT & GDS II DATA GENERATION 1<12RS.1.00 Lakh Rs.25,000/- per wafer minimum two wafer order plus Rs.0.5 Lakhs as fixed cost. Rs.0.50 Lakhs 2>12 Rs.8500/mm2 Rs.25,000/- per wafer minimum two wafer order plus fixed cost @Rs.4500/mm2 Rs.0.50 Lakhs

11. 9-7-'08IUCEE WORKSHOP - VLSI DESIGN11 Summary Fabrication facilities are explored for IC prototyping and characterization. SCL’s India Chip program is taken as case study and it seems to be viable.