Download presentation
Presentation is loading. Please wait.
1
1ISM - © 2010 Houman Younessi Lecture 5 Convener: Houman Younessi 1-860-548-7880 youneh@rpi.edu Information Systems Spring 2011
2
2ISM - © 2010 Houman Younessi Lecture 5 Islands of Information/Automation Need for inter-communication
3
3ISM - © 2010 Houman Younessi Lecture 5 Network: A collection of links arranged so that messages may be passed from one part to another usually over multiple links. Data Communication Networks Tele-Communication Networks
4
4ISM - © 2010 Houman Younessi Lecture 5 Network Protocols The Open Systems Interconnection Reference Model (OSI Model or OSI Reference Model for short) is a layered, abstract description for communications and computer network protocol design.
5
5ISM - © 2010 Houman Younessi Lecture 5 Layer 1: Physical Layer Defines all the electrical and physical specifications for devices including layout of pins, voltages, and cable specifications. Hubs, repeaters, network adapters and Host Bus Adapters (HBAs used in Storage Area Networks) are physical-layer devices. Ethernet incorporates both this layer and the data-link layer (Layer 2). The same applies to other local-area networks, such as Token ring, FDDI, and IEEE 802.11. The major functions and services performed by the physical layer are: Establish/terminate a connection Contention resolution and flow control Modulation, or conversion between the representation of digital data in user equipment and the corresponding signals transmitted over a communications channel. These are signals operating over the physical cabling—copper and fiber optic, for example—or over a radio link.
6
6ISM - © 2010 Houman Younessi Lecture 5 Transfers data between network entities and to detect and possibly correct errors that may occur in the Physical layer. The addressing scheme is physical which means that the addresses are hard-coded into the network cards at the time of manufacture. The addressing scheme is flat. Examples are Ethernet, HDLC and ADCCP for point-to-point or packet-switched networks and Aloha for local area networks. On IEEE 802 local area networks, and some non-IEEE 802 networks such as FDDI, this layer may be split into a Media Access Control (MAC) layer and the IEEE 802.2 Logical Link Control (LLC) layer. This is the layer at which the bridges and switches operate. Connectivity is provided only among locally attached network nodes. Layer 2: Data Link Layer
7
7ISM - © 2010 Houman Younessi Lecture 5 Layer 3: Network Layer Provides the functional and procedural means of transferring variable length data sequences from a source to a destination via one or more networks while maintaining the quality of service requested by the Transport layer. The Network layer performs network routing, flow control, segmentation/de-segmentation, and error control functions. Routers operate at this layer—sending data throughout the extended network and making the Internet possible (there also exist layer 3 (or IP) switches). This is a logical addressing scheme – values are chosen by the network engineer. The addressing scheme is hierarchical. The best known example of a layer 3 protocol is the Internet Protocol (IP).
8
8ISM - © 2010 Houman Younessi Lecture 5 Layer 4: Transport Layer Provides transparent transfer of data between end users, thus relieving the upper layers from any concern while providing reliable and cost-effective data transfer. The transport layer controls the reliability of a given link. Some protocols are state and connection oriented. This means that the transport layer can keep track of the packets and retransmit those that fail. The best known example of a layer 4 protocol is the Transmission Control Protocol (TCP). It is the layer that converts messages into TCP, User Datagram Protocol (UDP), Stream Control Transmission Protocol (SCTP), etc. packets.
9
9ISM - © 2010 Houman Younessi Lecture 5 Layer 5: Session Layer Controls the dialogues (sessions) between computers. It establishes, manages and terminates the connections between the local and remote application. It provides for either duplex or half-duplex operation and establishes check- pointing, adjournment, termination, and restart procedures. The OSI model made this layer responsible for "graceful close" of sessions, which is a property of TCP, and also for session check-pointing and recovery, which is not usually used in the Internet protocol suite.
10
10ISM - © 2010 Houman Younessi Lecture 5 Layer 6: Presentation Layer Transforms data to provide a standard interface for the Application layer. MIME encoding, data compression, data encryption and similar manipulation of the presentation is done at this layer to present the data as a service or protocol developer sees fit. Examples: converting an EBCDIC-coded text file to an ASCII-coded file, or serializing objects and other data structures into and out of XML.
11
11ISM - © 2010 Houman Younessi Lecture 5 Layer 7: Application Layer Provides a means for the user to access information on the network through an application. This layer is the main interface for the user(s) to interact with the application and therefore the network. Some examples of application layer protocols include Telnet, File Transfer Protocol (FTP), Simple Mail Transfer Protocol (SMTP) and Hypertext Transfer Protocol (HTTP).
12
12ISM - © 2010 Houman Younessi Lecture 5
13
13ISM - © 2010 Houman Younessi Lecture 5 Towards a Real-time Infra-structure: Better Data – Better Decisions Improved Process Visibility Improved Process Efficiency Sense-and-respond (respond to actual demand rather than forecasted demand) But for this to take place, we need to integrate more than just the production.
Similar presentations
© 2024 SlidePlayer.com. Inc.
All rights reserved.