1. Tutorial: Hatch Assembly
Chapter 6

2. Components Hinge Hatch Frame Pin
INTRODUCTION TO SOLID MODELING USING SOLIDWORKS 2009

3. Subassembly - Door Components: Hatch (base part) Hinge (2)
INTRODUCTION TO SOLID MODELING USING SOLIDWORKS 2009

4. Mate 1 - Coincident (Bottom Face)
INTRODUCTION TO SOLID MODELING USING SOLIDWORKS 2009

5. Mate 2 - Coincident
INTRODUCTION TO SOLID MODELING USING SOLIDWORKS 2009

6. Mate 3 - Distance 1-inch offset distance
INTRODUCTION TO SOLID MODELING USING SOLIDWORKS 2009

7. Similar Mates for Second Hinge
INTRODUCTION TO SOLID MODELING USING SOLIDWORKS 2009

8. Assembly - Hatch Components: Frame (base part) Door Assembly Hinge (2)
Pin (2)
INTRODUCTION TO SOLID MODELING USING SOLIDWORKS 2009

9. Mate 1 – Coincident Between Planes
Using symmetry when creating parts allows the standard planes of the parts to be used for mates
INTRODUCTION TO SOLID MODELING USING SOLIDWORKS 2009

10. Mate 2 - Coincident (Back face)
INTRODUCTION TO SOLID MODELING USING SOLIDWORKS 2009

11. Mate 3 - Coincident
INTRODUCTION TO SOLID MODELING USING SOLIDWORKS 2009

12. Mate 4 - Concentric
INTRODUCTION TO SOLID MODELING USING SOLIDWORKS 2009

13. Mate 5 - Distance
INTRODUCTION TO SOLID MODELING USING SOLIDWORKS 2009

14. Mate 6 - Concentric
INTRODUCTION TO SOLID MODELING USING SOLIDWORKS 2009

15. Mate 7 - Coincident
INTRODUCTION TO SOLID MODELING USING SOLIDWORKS 2009

16. Repeat Mates for Other Hinge/Pin
INTRODUCTION TO SOLID MODELING USING SOLIDWORKS 2009