1. EE365 Adv. Digital Circuit Design Clarkson University Lecture #7 Intro to MSI PLDs and Decoders

2. Topics MSI Intro PLDs Decoders Rissacher EE365Lect #7

3. Role of MSI Components in Logic Design Gates are the fundamental building blocks of logic - the “atoms”. Medium Scale Integrated (MSI) components are the “molecules” - the commonly occurring functions. MSI components form the building blocks for much more complex functions. Rissacher EE365Lect #7

4. MSI vs. Gate Level Design Functions more complex - more inputs and/or outputs. Find a good, feasible design, not necessarily optimal. Not restricted to two-level logic. Trade-off propagation delay with simplicity of design. Keep IC count low (usually ignore gate count). Rissacher EE365Lect #7

5. MSI vs. Gate Level Design Look for designs which are scalable - easily expanded to handle more inputs. Look for designs which are hierarchical - built upon already designed functions. No automated, general design algorithm - must be creative. Same principles apply to custom VLSI or ASIC design. Rissacher EE365Lect #7

6. Programmable Logic Arrays (PLAs) Any combinational logic function can be realized as a sum of products. Idea: Build a large AND-OR array with lots of inputs and product terms, and programmable connections. –n inputs AND gates have 2n inputs -- true and complement of each variable. –m outputs, driven by large OR gates Each AND gate is programmably connected to each output’s OR gate. –p AND gates (p<<2 n ) Rissacher EE365Lect #7

7. Example: 4x3 PLA, 6 product terms Rissacher EE365Lect #7

8. Compact representation Actually, closer to physical layout (“wired logic”). Rissacher EE365Lect #7

9. Some product terms Rissacher EE365Lect #7

10. PLA Electrical Design See Section 5.3.5 -- wired-AND logic Rissacher EE365Lect #7

11. Programmable Array Logic (PALs) How beneficial is product sharing? –Not enough to justify the extra AND array PALs ==> fixed OR array –Each AND gate is permanently connected to a certain OR gate. Example: PAL16L8 Rissacher EE365Lect #7

12. 10 primary inputs 8 outputs, with 7 ANDs per output 1 AND for 3-state enable 6 outputs available as inputs –more inputs, at expense of outputs –two-pass logic, helper terms Note inversion on outputs –output is complement of sum-of-products –newer PALs have selectable inversion Rissacher EE365Lect #7

13. Designing with PALs Compare number of inputs and outputs of the problem with available resources in the PAL. Write equations for each output using ABEL. Compile the ABEL program, determine whether minimimized equations fit in the available AND terms. If no fit, try modifying equations or providing “helper” terms. Rissacher EE365Lect #7

14. Decoders General decoder structure Typically n inputs, 2 n outputs –2-to-4, 3-to-8, 4-to-16, etc. Rissacher EE365Lect #7

15. Binary 2-to-4 decoder Note “x” (don’t care) notation. Rissacher EE365Lect #7

16. 2-to-4-decoder logic diagram Rissacher EE365Lect #7

17. MSI 2-to-4 decoder Input buffering (less load) NAND gates (faster) Rissacher EE365Lect #7

18. Decoder Symbol Rissacher EE365Lect #7

19. Complete 74x139 Decoder Rissacher EE365Lect #7

20. More decoder symbols Rissacher EE365Lect #7

21. Minterms & Decoders Rissacher EE365Lect #7 Note that outputs to decoders correspond to Minterms

22. Minterms & Decoders Rissacher EE365Lect #7 SOP can be formed by combining outputs i.e., Z = (I0’ I1’) + (I0 I1’) Most Decoders have active-low outputs, so they need to be inverted or a NAND can be substituted

23. 3-to-8 decoder Rissacher EE365Lect #7

24. 74x138 3-to-8-decoder symbol Rissacher EE365Lect #7

25. Decoder cascading 4-to-16 decoder Rissacher EE365Lect #7

26. In-Class Practice Problem Wire the 74x139 to make a 3-to-8 decoder You may use inverters Rissacher EE365Lect #7

27. In-Class Practice Problem Note that this would not normally be done since the 74x138 does the same thing A B C Rissacher EE365Lect #7

28. More cascading 5-to-32 decoder Rissacher EE365Lect #7

29. Decoder applications Microprocessor memory systems –selecting different banks of memory Microprocessor input/output systems –selecting different devices Microprocessor instruction decoding –enabling different functional units Memory chips –enabling different rows of memory depending on address Lots of other applications Rissacher EE365Lect #7

30. Next time Buffers Drivers Encoders Multiplexers Exclusive OR Gates Rissacher EE365Lect #7