Presentation is loading. Please wait.

Presentation is loading. Please wait.

Dr. Martin T. Auer MTU Department of Civil & Environmental Engineering Water Treatment.

Similar presentations


Presentation on theme: "Dr. Martin T. Auer MTU Department of Civil & Environmental Engineering Water Treatment."— Presentation transcript:

1 Dr. Martin T. Auer MTU Department of Civil & Environmental Engineering Water Treatment

2 Charge Neutralization

3 Bridging negatively- charged particle negatively- charged particle hydroxo- metallic complex floc

4 Particle Settling Velocities ParticleDiameter (mm)Velocity (m/s) Sand1.02x10 -1 Fine sand0.11x10 -2 Silt0.011x10 -4 Clay0.0011x10 -6 Source: Vesilind & Morgan

5 sorption Chlorine Distribution

6 Drinking Water Process Train

7 Equilibrium Chemistry

8 Iron and Manganese

9 Hardness

10 The most commonly used adsorbent is granular activated carbon (GAC). These irregular particles, 0.2-5 mm in diameter, are a char of carbon material (wood or coal). They are ‘activated’ or made more porous by exposure to steam at high temperature. Activated carbon has 1000 m 2 of adsorbing surface area per gram (~ 1 teaspoon) or equivalent to that of a 40 acre farm in one handful! Source: Sontheimer et al. 1988 Source: Chemviron Carbon Source: Millenium Inorganic Chemicals Granular Activated Carbon

11 Organic chemicals are typically removed from a water supply prior to distribution through the process of adsorption: the physical-chemical attraction of a solid material for a chemical in solution. In adsorption, the chemical being adsorbed is termed the adsorbate and the solid to which it sorbs is the adsorbent. Influent stream Effluent stream The Adsorption Process

12 For adsorption to be effective, the chemical must sorb strongly. Poorly soluble (hydrophobic) compounds (e.g. the components of gasoline) adsorb more strongly than highly soluble (hydrophilic) compounds (e.g. table salt). 0 2 4 6 02468 Time (d) Concentration (mg/L) Poorly sorbed Strongly sorbed … tendency to sorb

13 In drinking water treatment, adsorption with GAC is accomplished using a packed bed column. The untreated water is introduced at the top of the column and trickles down through the GAC. Contaminants are removed en route and clean water emerges at the bottom of the column. In application, columns 6 feet in diameter and 30 feet in height are not uncommon. GAC columns Bed Carbon … application in water treatment

14 Water flows thru the column and contaminants are adsorbed. With time, the GAC becomes saturated (sorption capacity is reached) and contaminants exit the bed (breakthrough). The exhausted carbon must then be replaced. C in C eq C out exhaustion breakthrough … column operation

15 Asbestos/Arsenic/Metals Removal Sorption with Ferric sulfate: asbestos, arsenic, cadmium, chromium, copper, lead, mercury, molybdenum, selenium, silver Coagulation with Alum: asbestos, nickel, uranium

16 Reverse Osmosis

17 Ultrafiltration

18 300 µm ID 500 µm OD polypropylene fiber

19 Ultrafiltration 0.2 µm nominal pore size

20 Ultrafiltration Technology epoxy seal permeate flow raw water in

21 Ultrafiltration banks of fiber bundles

22 Ultrafiltration contaminants backwashing

23 Home Water Treatment Reverse osmosis unit (salt) Softening by ion exchange (hardness)

24 Home Water Treatment Three step process: sieve and bottom filter – rust, sand, turbidity activated carbon filter – chlorine, color and SOCs ion exchange resin – metals Bottled Water: $8 /gallon Tap Mount: $0.25 / gallon Municipal: $0.0015 / gallon Achieves 99.99% removal of Giardia and Cryptosporidium cysts, but does not remove all pathogenic organisms.


Download ppt "Dr. Martin T. Auer MTU Department of Civil & Environmental Engineering Water Treatment."

Similar presentations


Ads by Google