1. Develop Application with Open Fabrics Yufei Ren Tan Li

2. Agenda RDMA concept review Modules in OFED-1.5.1 userspace librdmacm (RDMA Communication) libibverbs (InfiniBand) Installation OFED on FedoraCore12/RHEL5 about Lustre & future work

3. RDMA ? RDMA: networking technologies that have a software interface with three features: –Remote DMA (RDMA write, RDMA read) –Asynchronous work queues (as Tan has illustrated) –Kernel bypass

4. RDMA - Kernel bypass non-iWARPiWARP

5. RDMA Verbs and Objects Not quite an API Abstract definition of functionality “Resources(Objects) operated on by Verbs(functions).” –such as Queue Pair/Completion Queue operated on by Create/Destroy. –rdma_create_qp()/rdma_destroy_qp() in librdmacm/include/rdma_cma.h Maybe considered as Object and Method in OO language(C++/Java).

6. What is OpenFabrics include : –Kernel-level drivers –Channel-oriented RDMA bypasses –Application Program Interface(API) for : –Parallel Message Passing(MPI) –Socket Data Exchage(SDP) –File System(Lustre)

7. Modules in OFED-1.5.1 userspace librdmacm : Linux library to abstract connection setup. libibverbs : a library that allows programs to use RDMA "verbs" for direct access to RDMA (currently InfiniBand and iWARP) hardware from userspace. device-specific drivers: –IB: libmthca, libmlx4, libipathverbs, libehca –iWARP: libcxgb3, libamso

8. librdmacm Linux library to abstract connection setup. Same code runs on IB and iWARP fabric technologies. Mimics TCP socket model. (socket, connect, bind, listen, accept, getaddrinfo, etc). cm_id is socket analog. IP addressing can be used on iWARP, even InfiniBand (IPoIB). Additional address/route resolution steps. –rdma_resolve_addr() –rdma_resolve_route() Events reported through “channels” - rdma_create_event_channel() - rdma_get_cm_channel() - rdma_ack_cm_channel()

9. An example of ftp via OpenFabrics Put Get RDMA FTP Client RDMA FTP Server rdma_getaddrinfo() rdma_create_ep() rdma_listen() rdma_accept() blocks until connection from client rdma_get_recv_comp() rdma_post_send() rdma_connect() rdma_post_send() rdma_get_recv_comp() rdma_disconnect() connection establishment data rdma_getaddrinfo() rdma_create_ep() rdma_deg_mr() rdma_destroy_ep() rdma_disconnect() rdma_deg_mr() rdma_destroy_ep() FTP Protocol FS

10. librdmacm – initialization rdma_create_event_channel() – Open a channel used to report communication events. Asynchronous events are reported to users through event channels. Each event channel maps to a file descriptor. rdma_create_id() – Allocate a communication identifier. Creates an identifier that is used to track communication information. Just as socket_fd.

11. librdmacm – active connection steps rdma_resolve_addr() –Resolve destination and optional source addresses from IP addresses to an RDMA address. If successful, the specified rdma_cm_id will be bound to a local device. getaddrinfo() in socket API. rdma_resolve_route() –Resolve the route information needed to establish a connection. This is called on the client side of a connection after calling rdma_resolve_addr, but before calling rdma_connect. rdma_connect() –Initiate an active connection request.

12. librdmacm – passive connection steps rdma_bind_addr() –Bind an RDMA identifier to a source address. rdma_listen() –Listen for incoming connection requests. rdma_accept() –Called to accept a connection request.

13. librdmacm – data transfer rdma_post_send() –opcode == IBV_WR_RDMA_READ –RDMA read rdma_post_send() –Opcode == IBV_WR_RDMA_WRITE –RDMA write. librdmacm/example/rping.c

14. librdmacm – Abbreviation QP: queue pair CQ: completion queue WQ: working queue MR: memory region PD: protection domain SRQ: shared receive queue AH: address handle MW: memory window

15. libibverbs libibverbs is a library that allows programs to use RDMA "verbs" for direct access to RDMA (currently InfiniBand and iWARP) hardware from userspace. Linux implementation of RDMA verbs. Loads device-specific drivers for hardware support. IB: libmthca, libmlx4, libipathverbs, libehca iWARP: libcxgb3, libamso

16. Install OFED on FedoraCore12 http://docs.google.com/Doc?docid=0AYXBBIFwi6bqZGY5cm1j eGJfNjAzc2N6eGt2Mw&hl=en

17. lustre File system clients Object Storage Servers(OSS): provide file I/O services Metadata Servers(MDS): manage the names and directories in the file system

18. Lustre – cont’

19. Future work OpenFabrics run example on netqos04. Configure lustre on netqos04. Real cluster need more machines. LPAR? OpenFabrics sources and RFC5040/5041/5044.