1. 1 1.2 Measured Numbers and Significant Figures Chapter 1Measurements Copyright © 2005 by Pearson Education, Inc. Publishing as Benjamin Cummings

2. 2 Measured Numbers A measuring tool is used to determine a quantity such as height or the mass of an object. provides numbers for a measurement called measured numbers. Copyright © 2005 by Pearson Education, Inc. Publishing as Benjamin Cummings

3. 3. l 2.... l.... l 3.... l.... l 4.. cm The markings on the meter stick at the end of the orange line are read as the first digit 2 plus the second digit 2.7 The last digit is obtained by estimating. The end of the line might be estimated between 2.7– 2.8 as half-way (0.5) or a little more (0.6), which gives a reported length of 2.75 cm or 2.76 cm. Reading a Meter Stick

4. 4 Known & Estimated Digits In the length reported as 2.76 cm, The digits 2 and 7 are certain (known). The final digit 6 was estimated (uncertain). All three digits (2.76) are significant including the estimated digit.

5. 5. l 8.... l.... l 9.... l.... l 10.. cm What is the length of the orange line? 1) 9.0 cm 2) 9.03 cm 3) 9.04 cm Learning Check

6. 6. l 8.... l.... l 9.... l.... l 10.. cm The length of the orange line could be reported as 2) 9.03 cm or 3) 9.04 cm The estimated digit may be slightly different. Both readings are acceptable. Solution

7. 7. l 3.... l.... l 4.... l.... l 5.. cm For this measurement, the first and second known digits are 4.5. Because the line ends on a mark, the estimated digit in the hundredths place is 0. This measurement is reported as 4.50 cm. Zero as a Measured Number

8. 8 Significant Figures in Measured Numbers Significant figures obtained from a measurement include all of the known digits plus the estimated digit. reported in a measurement depend on the measuring tool.

9. 9 Significant Figures

10. 10 All non-zero numbers in a measured number are significant. Number of Measurement Significant Figures 38.15 cm 4 5.6 ft 2 65.6 lb 3 122.55 m 5 Counting Significant Figures

11. 11 Sandwiched zeros occur between nonzero numbers. are significant. Number of Measurement Significant Figures 50.8 mm 3 2001 min 4 0.0702 lb 3 0.40505 m 5 Sandwiched Zeros

12. 12 Trailing zeros follow non-zero numbers in numbers without decimal points. are usually place holders. are not significant. Number of Measurement Significant Figures 25 000 cm 2 200 kg 1 48 600 mL 3 25 005 000 g 5 Trailing Zeros

13. 13 Leading zeros precede non-zero digits in a decimal number. are not significant. Number of Measurement Significant Figures 0.008 mm 1 0.0156 oz 3 0.0042 lb 2 0.000262 mL 3 Leading Zeros

14. 14 State the number of significant figures in each of the following measurements. A. 0.030 m B. 4.050 L C. 0.0008 g D. 2.80 m Learning Check

15. 15 State the number of significant figures in each of the following measurements. A. 0.030 m2 B. 4.050 L4 C. 0.0008 g1 D. 2.80 m3 Solution

16. 16 Significant Figures in Scientific Notation In scientific notation all digits including zeros in the coefficient are significant. Number of Measurement Significant Figures 8 x 10 4 m 1 8.0 x 10 4 m 2 8.00 x 10 4 m 3

17. 17 A. Which answer(s) contain 3 significant figures? 1) 0.4760 2) 0.00476 3) 4.76 x 10 3 B. All the zeros are significant in 1) 0.00307 2) 25.300 3) 2.050 x 10 3 C. The number of significant figures in 5.80 x 10 2 is 1) one3) two3) three Learning Check

18. 18 A. Which answer(s) contain 3 significant figures? 2) 0.00476 3) 4.76 x 10 3 B. All the zeros are significant in 2) 25.300 3) 2.050 x 10 3 C. The number of significant figures in 5.80 x 10 2 is 3) three Solution

19. 19 In which set(s) do both numbers contain the same number of significant figures? 1) 22.0 and 22.00 2) 400.0 and 40 3) 0.000015 and 150 000 Learning Check

20. 20 Solution In which set(s) do both numbers contain the same number of significant figures? 3) 0.000015 and 150 000 Both numbers contain two (2) significant figures.

21. 21 Examples of Exact Numbers An exact number is obtained when objects are counted. Counted objects 2 soccer balls 4 pizzas from numbers in a defined relationship. Defined relationships 1 foot = 12 inches 1 meter = 100 cm

22. 22 Exact Numbers

23. 23 Learning Check A. Exact numbers are obtained by 1. using a measuring tool. 2. counting. 3. definition. B. Measured numbers are obtained by 1. using a measuring tool. 2. counting. 3. definition.

24. 24 Solution A. Exact numbers are obtained by 2. counting. 3. definition. B. Measured numbers are obtained by 1. using a measuring tool.

25. 25 Learning Check Classify each of the following as (1) exact or (2) measured numbers. A.__Gold melts at 1064°C. B.__1 yard = 3 feet C.__The diameter of a red blood cell is 6 x 10 -4 cm. D.__There are 6 hats on the shelf. E.__A can of soda contains 355 mL of soda.

26. 26 Classify each of the following as (1) exact or (2) measured numbers. A. 2 A measuring tool is required. B. 1 This is a defined relationship. C. 2 A measuring tool is used to determine length. D. 1 The number of hats is obtained by counting. E. 2 The volume of soda is measured. Solution