Download presentation
Presentation is loading. Please wait.
1
1 Beam-Beam Collimation Study Stephanie Majewski, Witold Kozanecki June 4, 2004 Acknowledgments: Ted Fieguth, Roger Barlow
2
2 Strategy NOT a beam-beam simulation Use TURTLE (Trace Unlimited Rays Through Lumped Elements) Generate a large-emittance beam (first in x, then in y) that fills the phase space at the IP –This is the naïve equivalent of a multi-turn calculation Simulate tightening existing collimator apertures Explore moving existing PR02 collimators downstream of the IP
3
3 Input Parameters x [mm]x’ [mrad]y [mm]y’ [mrad] /nominal Nominal Beam 0.1050.2100.004770.3131 “Large” X-Emittance 3.156.290.004770.313900 in x “Large” Y-Emittance 0.1050.2100.47731.310000 in y x (nominal) = 22 nm-rad y (nominal) = 1.49 nm-rad
4
4 Large X-Emittance: Phase Space Plot Z location where particles are lost. Colors correspond to upper plot. Starting x, x’ coordinates of particles lost along the beamline. x/ x x’/ x; Z [m] IP
5
5 lost particles corresponding to red peak on previous plot IP
6
6 Large Y-Emittance: Phase Space Plot -2095 m -1101 m -135 m No particles hit near IP Z location where particles are lost. Colors correspond to upper plot. Starting y, y’ coordinates of particles lost along the beamline. IP Z [m] y’/ y; y/ y IP
7
7 Compare Loss Points with LER Beta Functions [m] Z [m] IP
8
8 -3.6 m -2118 m -2095 m -2042 m -1900 m -1600 m -1325 m colors of arrows/text correspond to lost particle locations plotted on slides 4 &5 numbers are TURTLE coordinates solid arrows x dashed arrows y [m] Z [m] IP
9
9 Q2 QFS3L before QD34 QD__ near SCY3 QF__ before SCX3 QF__ QF3R01 QF4R01 QFPR12 QF__ solid arrows x dashed arrows y colors of arrows/text correspond to lost particle locations plotted on slides 4 &5 labels are MAD/TURTLE elements [m] Z [m] IP
10
10 -1125 m -1101 m -1075 m colors of arrows/text correspond to lost particle locations plotted on slides 4 &5 numbers are TURTLE coordinates solid arrows x dashed arrows y [m] Z [m]
11
11 QFI_ near DIDF, DM1BFF QDI_ near DSEP QFI_ near DM1BFF, DM1AFF solid arrows x dashed arrows y colors of arrows/text correspond to lost particle locations plotted on slides 4 &5 labels are MAD/TURTLE elements [m] Z [m]
12
12 Collimator Locations HER LER PEP-II Regions Map
13
13 Collimator Locations LER
14
14 LER Collimator Apertures Collimator Distance from IP Current Setting 8 10 12 Primary Y 3014 -365 my ≥ -10.5 mmy ≥ -6.8 mmy ≥ -8.5 mmy ≥ -10.2 mm Primary X 2082 -345 mx ≤ 11.8 mmx ≤ 8.9 mmx ≤ 11.1 mmx ≤ 13.3 mm Secondary X 2042 -320 mx ≤ 8.4 mmx ≤ 6.5 mmx ≤ 8.1 mmx ≤ 9.7 mm Secondary Y 2032 -313 my ≤ 6.3 mmy ≤ 5.5 mmy ≤ 6.9 mmy ≤ 8.3 mm Movable Jaw 3076 -25 m x ≥ -19.5 mm x ≤ 22.0 mm |x| ≤ 18.9 mm Movable Jaw 3043 -12 m x ≥ -27.5 mm x ≤ 26.0 mm |x| ≤ 17.4 mm *** Note: These are TURTLE sign conventions (+x = toward inside of ring for LER) PR04 PR02 based on fully-coupled vertical emittance, wiggler on: x = 48 nm-rad, y = 24 nm-rad
15
15 X Distribution at Movable Jaw X Collimator, -25 m from IP X [mm] minimal aperture 10 sigma setting particles that hit within ±25 m of IP Closing PRO4 Collimators current setting
16
16 +25.2 m from IP LER -25.2 m from IP X [mm] xx x [m] x [2 ] +25 m -13.654.20.0 -25 m +13.654.237.11 Results are based on an older LER deck (’98) with a tune of 0.57 (in x).
17
17 X Distribution at Movable Jaw X Collimator, -12 m from IP X [mm] minimal aperture 10 sigma setting Closing PRO4 Collimators current setting
18
18 +12.5 m from IP -12.5 m from IP X [mm] xx x [m] x [2 ] +12 m -11.946.10 -12 m 11.946.138.11 Results are based on an older LER deck (’98) with a tune of 0.57 (in x). LER
19
19 Summary Selected plots will be redone with new LER deck & current tune of 0.51 (in x) +25 m collimator can’t replace PR04 Recommendation: –Move -12 m collimator to +25 m –Keep -25 m collimator in current location Step 1: Leaving the -25 m collimator allows flexibility in collimation and complements PR04 Step 2: If successful, consider removing -25 m collimator in future to reduce HOM heating
20
20 X Distribution at Proposed Collimator Location, +12 m from IP X [mm] minimal aperture 10 sigma setting
21
21 X Distribution at Proposed Collimator Location, +25 m from IP X [mm] minimal aperture 10 sigma setting
22
22 Consistency Check – Compare w/ Durin (0 m = IP) Z [m] Coulomb Scattering 12 & 25 m collimators closed
23
23 Multi-Turn Extrapolation TURTLE only simulates one turn Caveat: Following results use a LER deck with a tune of 0.57 Do these results make sense for a storage ring?
24
24 Starting Point: +25 m Plots include all particles produced X’ [mrad]Y’ [mm]Y’ [mrad]
25
25 First-Order MAD Calculation xx x [m] x [2 ] +25 m -13.654.20.0 -25 m (+1 turn) +13.654.237.11 +25 m (+1 turn) -13.654.238.57 -25 m (+2 turns) +13.654.275.71 +25 m (+2 turns) -13.654.277.14
26
26 TURTLE/Calculation Comparison X [mm] Plots include all particles produced X [mm] X’ [mrad] Calculation starting point
27
27 Direct Comparison TURTLE X[mm] Plots include all particles produced
28
28 Correlation Check X’ [mrad] at +25 mY’ [mrad] at +25 m Plots include all particles produced
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.