1. Wide Area Networks CS 363 DePaul University

2. Questions on Final?

3. Group Evaluations 25 points per group member, including yourself Distribute total number of points across group members as you see fit Hand in now

4. Wide Area Networks Defined=> Transmission strategies: –PSTN –Leased circuits –Fiber –Microwave/Satellite –Wireless –Internet

5. Metropolitan Area Networks

6. WANS Enterprise Networks –DePaul’s network Global Networks –The Internet

7. PSTN Connectivity Circuits come in from CO Connect at Demarc in building Provide following services:

8. PSTN Services Switched 56 X.25 T1 T3 Frame Relay SMDS ISDN ATM

9. PPP multiprotocol negotiates and registers IP assignments on dial-up negotiates header compression relatively good security

10. SLIP only TCP/IP requires manual IP registration no security not really faster than PPP

11. Problem: You are responsible for setting up some remote workstations and a server that will be connected to the Internet. The workstations will be connecting to the server using standard telephone ines. You know that SLIP and PPP are useful protcols for your situation. Your boss comes in and says, “I think SLIP is the protocol we should start using here. What do you think?” What protocol would you recommend? List three advantages to the recommended protocol.

12. Circuit Switching like voice call on PSTN dedicated channel-always up no channel access delay inefficient use of transmission media requires more bandwidth connection delays

13. Message Switching no dedicated path messages contain source and destination info also referred to as store-and-forward networking ex: e-mail

14. Message Switching, cont. Pros: –efficient traffic management through prioritization –reduction of network traffic congestion –efficient use of data channels –asychronous communication across time zones Cons: –delays caused by store-n-forward –unsuitable for real-time applications

15. Packet Switching Advantages of circuit and message switching without any of the disadvantages Independent routing of packets –bandwidth/load balancing –dynamic rerouting Packet size restricted for efficiency and speed

16. Datagram Packet Switching post-office analogy

17. Virtual Circuit Packet Switching Virtual circuit (logical connection) All packets between the same start and end point use same logical connection (route) Used primarily for real-time, connection- oriented services like video and audio

18. Planning for Packet Switching Pros –PS improves use of network bandwidth –PS has shorter transmission delays than circuit switching because of small packet size RAM vs. Hard drive=>PS requires more RAM; MS requires more hard drive space Processor=>PS requires more processing power than MS Lost Packets=>sequencing

19. Connections Dial-up Dedicated Analog

20. Connections, Cont. Digital –T-carrier –Switched 56

21. X.25 and Frame Relay

22. ATM

23. ISDN

24. FDDI

25. SONET