Presentation is loading. Please wait.

Presentation is loading. Please wait.

ELEC 412 - Lecture 91 ELEC 412 RF & Microwave Engineering Fall 2004 Lecture 9.

Published by Modified over 9 years ago

Similar presentations

Presentation on theme: "ELEC 412 - Lecture 91 ELEC 412 RF & Microwave Engineering Fall 2004 Lecture 9."— Presentation transcript:

1 ELEC 412 - Lecture 91 ELEC 412 RF & Microwave Engineering Fall 2004 Lecture 9

2 ELEC 412 - Lecture 92 Low Freq Common-Emitter BJT Model Model is the hybrid-  BJT model where r BE = r , r BC = r , and r CE = r o

3 ELEC 412 - Lecture 93 ABCD Parameters of Some Circuits

4 ELEC 412 - Lecture 94 Conversion Between Network Reps

5 ELEC 412 - Lecture 95 Microwave Amplifier Subnetworks Amplifier is separated into subnetworks Add all subnetworks together for complete amplifier design

6 ELEC 412 - Lecture 96 High Frequency BJT Model Model is high-frequency hybrid-  model r BE =r , r CE =r o,C BE =C , C BC =C 

7 ELEC 412 - Lecture 97 S-Parameter Computation for T-Network T-Network S 11 & S 21 CircuitS 12 & S 22 Circuit

8 ELEC 412 - Lecture 98 Signal Flow Diagrams

9 ELEC 412 - Lecture 99 Signal Flow: Terminated Transmission Line

10 ELEC 412 - Lecture 910 Signal Flow: Building Blocks

11 ELEC 412 - Lecture 911 Signal Flow: Terminated Two Port

12 ELEC 412 - Lecture 912 Signal Flow: Simplification

13 ELEC 412 - Lecture 913 Signal Flow: Simplification – Con’t 1

14 ELEC 412 - Lecture 914 Signal Flow: Simplification – Resultant

15 ELEC 412 - Lecture 915 Signal Flow: Terminated Transmission Line

16 ELEC 412 - Lecture 916 Measuring S 11 & S 21

17 ELEC 412 - Lecture 917 S-Parameter Measurement Signal Flow

18 ELEC 412 - Lecture 918 TRL Calibration Method

19 ELEC 412 - Lecture 919 TRL Calibration Method – Con’t

Download ppt "ELEC 412 - Lecture 91 ELEC 412 RF & Microwave Engineering Fall 2004 Lecture 9."

Similar presentations

Amplifying Signals Breadboarding: from a diagram to an actual working amplifier.

Amplifying Signals Breadboarding: from a diagram to an actual working amplifier.
MULTISTAGE AMPLIFIERS

MULTISTAGE AMPLIFIERS
The University of Tennessee Electrical and Computer Engineering

The University of Tennessee Electrical and Computer Engineering
Two-port networks Review of one ports Various two-port descriptions

Two-port networks Review of one ports Various two-port descriptions
Lecture 6. Chapter 3 Microwave Network Analysis 3.1 Impedance and Equivalent Voltages and Currents 3.2 Impedance and Admittance Matrices 3.3 The Scattering.

Lecture 6. Chapter 3 Microwave Network Analysis 3.1 Impedance and Equivalent Voltages and Currents 3.2 Impedance and Admittance Matrices 3.3 The Scattering.
Prof. David R. Jackson Dept. of ECE Notes 16 ECE 5317-6351 Microwave Engineering Fall 2011 S -Parameter Measurements 1.

Prof. David R. Jackson Dept. of ECE Notes 16 ECE Microwave Engineering Fall 2011 S -Parameter Measurements 1.
ANALOG ELECTRONIC CIRCUITS 1 EKT 204 Frequency Response of BJT Amplifiers (Part 2) 1.

ANALOG ELECTRONIC CIRCUITS 1 EKT 204 Frequency Response of BJT Amplifiers (Part 2) 1.
June 2004, CERN AB RF / FB, João Bento, Fritz Caspers 1 The IEEE1394 Test Board Results Measurements with a Vector Network Analyzer (VNA) type HP 8753D.

June 2004, CERN AB RF / FB, João Bento, Fritz Caspers 1 The IEEE1394 Test Board Results Measurements with a Vector Network Analyzer (VNA) type HP 8753D.
Chapter 13 : Bipolar Junction Transistors 13-0 Introduction 13-1 Current and voltage relationships 13-2 Common –emitter characteristics 13-3 Load –line.

Chapter 13 : Bipolar Junction Transistors 13-0 Introduction 13-1 Current and voltage relationships 13-2 Common –emitter characteristics 13-3 Load –line.
Fundamentals of Electric Circuits Chapter 19 Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.

Fundamentals of Electric Circuits Chapter 19 Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.
ELEC 412 - Lecture 181 ELEC 412 RF & Microwave Engineering Fall 2004 Lecture 18.

ELEC Lecture 181 ELEC 412 RF & Microwave Engineering Fall 2004 Lecture 18.
EEE 194RF_ L12Low and High-Pass Filter Examples1 ELEC 412 RF & Microwave Engineering Fall 2004 Lecture 12 Low and High Pass Filter Examples.

EEE 194RF_ L12Low and High-Pass Filter Examples1 ELEC 412 RF & Microwave Engineering Fall 2004 Lecture 12 Low and High Pass Filter Examples.
Common-Base vs. Common-Emitter

Common-Base vs. Common-Emitter
ELEC 412Lecture 51 ELEC 412 RF & Microwave Engineering Fall 2004 Lecture 5.

ELEC 412Lecture 51 ELEC 412 RF & Microwave Engineering Fall 2004 Lecture 5.
EEE194RF_L12a1 Low Freq Common-Emitter BJT Model Model is the hybrid-  BJT model where r BE = r , r BC = r , and r CE = r o.

EEE194RF_L12a1 Low Freq Common-Emitter BJT Model Model is the hybrid-  BJT model where r BE = r , r BC = r , and r CE = r o.
Fig. 7.1 Bode plot for the typical magnitude term. The curve shown applies for the case of a zero. For a pole, the high-frequency asymptote should be drawn.

Fig. 7.1 Bode plot for the typical magnitude term. The curve shown applies for the case of a zero. For a pole, the high-frequency asymptote should be drawn.
ELEC 412Lecture 41 ELEC 412 RF & Microwave Engineering Fall 2004 Lecture 4.

ELEC 412Lecture 41 ELEC 412 RF & Microwave Engineering Fall 2004 Lecture 4.
The maximum current flows when |X C |

The maximum current flows when |X C |
ELEC 412 - Lecture 111 ELEC 412 RF & Microwave Engineering Fall 2004 Lecture 11.

ELEC Lecture 111 ELEC 412 RF & Microwave Engineering Fall 2004 Lecture 11.
ELEC 412 - Lecture 191 ELEC 412 RF & Microwave Engineering Fall 2004 Lecture 19.

ELEC Lecture 191 ELEC 412 RF & Microwave Engineering Fall 2004 Lecture 19.

Similar presentations

Ads by Google