1. 1)Pull the tape across the river 2)Use cross-section stakes to tighten the tape 3)Determine the water width (W) and Wi = W/20

2. 4)Read the tape at LEW 5)Smile a lot

3. 6)Set rod at ½ Wi from LEW 7)Measure depth 8)Careful of length units on probe 9)Careful of the bow wave Don’t read depth here… Do read depth here…

4. 10)Set rod at 60% depth 11)Push both black buttons at once 12)Wait 30-45 seconds 13)Careful of where you stand What’s he doing!!?? That’s only 59% depth…

5. 14) Bite the bottom lip 15) Read the bottom number 16) Divide V by 10 for m/s

6. Take good notes Calculate as you go Ai = di*(X after – X before )/2 Qi = Ai*Vi Q =  Qi Keep one heel up!