1. COMP 14 Introduction to Programming Miguel A. Otaduy May 18, 2004

2. Today Control Structures Relational Operators Comparing Strings Boolean Expressions If statements If-Else statements

3. Example: Parallel Parking Some words used in the algorithm: when, until, if, otherwise, once… How can we express them in Java?

4. Control Structures Three methods of processing a program: 1. In sequence –statements are executed one after another in order 2. Branching – altering the flow of program execution by making a selection or choice 3. Looping – altering the flow of program execution by repetition of statement(s)

5. Flow of Execution

6. Examples of Conditionals Note: the following are not actual Java statements 1) if (score is greater than or equal to 90) grade is A 2) if (hours worked are less than or equal to 40) wages = rate * hours otherwise wages = (rate * 40) + 1.5 * (rate * (hours - 40)) 3) if (temperature is greater than 70 degrees and it is not raining) recommended activity is golfing

7. Relational Operators Relational Operator –allows you to make comparisons in a program –binary operator needs two operands Condition is represented by a logical (Boolean) expression –expression that has a value of either true or false

8. Relational Operators Less than < Greater than > Equal to == –not assignment ‘ = ‘ Not equal to != Less than or equal to <= Greater than or equal to >=

9. Comparing Characters In Java, characters are ordered according to the Unicode / ASCII character set (pg. 855) ‘a’ comes before ‘b’ in the character set, so we can say ‘a’ < ‘b’ Order –space character (' ') –digits (‘0’, ‘1’, …) –uppercase –lowercase Application: sort alphabetically

10. Comparing Characters 'a' > 'A' '6' < 7 ' ' <= 's' 97 > 65 true 54 < 7 false 32 <= 115 true

11. Comparing Floating-Point Be careful when using the equality (==) to compare floating point numbers Every bit in the representation must be equal –computer can only store a certain number of digits after the decimal If the numbers are results of computation, it’s unlikely that two floating point numbers will be exactly equal

12. Comparing Floating-Point 3.0 / 7.0 2.0 / 7.0 (3.0 / 7.0) + (2.0 / 7.0) + (2.0 / 7.0) == 1 0.4285714285714285 false 0.2857142857142857 If we did this math with exact arithmetic, this expression would be true 0.9999999999999999

13. Comparing Strings Strings are compared on a character-by- character basis –first character not in common determines how the strings compare –ex: "Airplane" is less than "Airport" If two strings have different lengths, and one is a substring of the other, the shorter one is evaluated as less –ex: "Air" is less than "Airplane"

14. Comparing Strings Don't use relational operators (==, ) for Strings str1.compareTo (str2) Returns an integer value: –< 0 if str1 is less than str2 –0 if str1 is equal to str2 –>0 if str1 is greater than str2 str1.equals (str2) Returns a boolean value of true or false method parameter

15. Questions Given String str = "Homer"; str.compareTo("Marge") str.equals("homer") str.compareTo("Bart") negative value false positive value

16. Boolean Expressions Remember that booleans in Java are –true –false A boolean expression is an expression that can be evaluated to either true or false Examples of boolean expressions: –2+2 is not equal to 5 –a is equal to 0 –10 is less than 5 Named for George Boole (1815-1864), the founder of symbolic logic

17. Boolean Operators NOT ! (unary) !(2+2==5) AND && (binary) (2+2==5) && (1+1==2) OR || (binary) (2+2==5) || (1+1==2) true false true

18. NOT Operator

19. AND and OR Operators

20. Boolean Expressions Examples Simple: –2+2 is not equal to 5 2+2 != 5 –10 is less than 5 10 < 5 –'A' is equal to 7' A' == 7 Compound: –a is equal to 3 and b is equal to 5 (a==3) && (b==5) –x is not equal to 2 or y is less than 4 (x!=2) || (y<4) –s is not equal to b and t is greater than or equal to 3 or t is less than 0 (s!=b) && (t>=3) || (t<0)

21. Short Circuited Operators The processing of logical AND ( && ) and logical OR ( || ) is “short-circuited” If the left operand is sufficient to determine the result, the right operand is not evaluated count != 0 && total/count > MAX

22. Precedence of Operators

23. Boolean Expressions Logical expression that evaluates to true if the value of num is between 0 and 10 0 <= num <= 10 0 <= num && num <= 10 incorrect syntax correct syntax

24. Questions 1. What type of primitive variable can the result of a logical expression be stored in? 2. Under what conditions would the expression (ch >= 'A' && ch <= 'Z') evaluate to false ? 3. What method do you use to compare two Strings? 4. Why is 'a' greater than 'A'? boolean ch 'Z' compareTo Because 'a' comes after 'A' in the ASCII (or Unicode) character table.

25. Questions Given the following declarations, evaluate each Boolean expression: int count = 0, sum = 54; double x = 4.3, y = 1.2; boolean wrong = true; 1.(wrong && sum > 60) 2.((x > 5) || !(sum == 55)) 3.!((y > 1.0) && (x < 4)) 4.((count != 4) || (sum > 100) && wrong) false true (false || !(false)) !(true && false) (true || false && true) (true && false) (true || false)

26. Conditional Statements Let us choose which statement will be executed next –also called selection statements Java's conditional statements: –the if statement –the if-else statement –the switch statement (tomorrow’s class)

27. One-Way Selection Syntax: if (expression) statement

28. The if Statement if ( condition ) statement; if is a Java reserved word The condition must be a boolean expression. It must evaluate to either true or false. If the condition is true, the statement is executed. If it is false, the statement is skipped.

29. The if Statement if (sum > MAX) delta = sum - MAX; System.out.println ("The sum is " + sum); First, the condition is evaluated. The value of sum is either greater than the value of MAX, or it is not. If the condition is true, the assignment statement is executed. If it is not, the assignment statement is skipped. Either way, the call to println is executed next.

30. Block Statements Syntax: { statement1 statement2. statementn } We use curly braces to group a set of individual statements. This way we can have multiple statements execute based on a decision. If we don't use curly braces, only a single statement will be executed based on the result of a decision.

31. The if Statement if (sum > MAX) delta = sum - MAX; System.out.println ("The sum is " + sum); A if (sum > MAX) { delta = sum - MAX; } System.out.println ("The sum is " + sum); B if (sum > MAX) { delta = sum - MAX; System.out.println ("The sum is " + sum); } C

32. Curly Braces int num = 87, max = 25; if (num >= max*2) { System.out.println ("apple"); } System.out.println ("orange"); System.out.println ("pear"); int num = 87, max = 25; if (num >= max*2) System.out.println ("apple"); System.out.println ("orange"); System.out.println ("pear");

33. ToLower.java Example

34. Watch out! if (score >= 90); grade = "A"; No matter the result of the condition, grade will be assigned "A". The semicolon after the if statement is a semantic error.

35. Two-Way Selection

36. The if-else Statement if ( condition ) statement1; else statement2; If the condition is true, statement1 is executed; if the condition is false, statement2 is executed One or the other will be executed, but not both

37. The if-else Statement if (height <= MAX) { adjustment = 0; } else { adjustment = MAX-height; }

38. ToLower.java Continued

39. To do HW 2 –Add if statements Reading: Chapter 4 (pp. 172 - end) Bring laptop