2. 2 Team Induct-Us: Anna Camery Kyle Ryan Brady Coyle Brett Russell Dan Mathewson Advisors: Herb Hess David Atkinson Greg Donohoe Mentors: John Porter Armen Dibble Sponsored by: NASA AMES

3. K-10 Lunar Rover 3 Remote, extraterrestrial, surveillance robot under development at NASA Ames Instruments: 360 °, panoramic, 3D scanning laser Ground penetrating radar Color panoramic camera High resolution terrain imager

4. Current Power System 4 Ocean Server Battery Management System Smart Li-ion battery packs 14.4V, 6.6AHr (24) Battery management module Integrates battery stacks Ocean Server software Monitors battery status

5. Current Issues Batteries must be physically removed or plugged in through 3 ports to be charged Physical interaction is not an option ‘off-planet’ Need to find a way to remotely plug in K-10 and charge the batteries 5

6. Proposed Solution 6 Induction Based Charger: Create a two-part separable transformer, split between the rover and base station No direct human interaction required to charge rover batteries

7. How It Works 7 When the electric current alternates in a wire loop a magnetic field is created. A second wire near the magnetic field will experience and induced electrical charge. The induced charge will charge the battery without physical contact.

8. 8 Ocean Server Boards Power Input AC-DC Converter DC-AC Inverter AC-DC Converter Isolated Power Regulation Primary Side Station Secondary Side Rover How It Was Done 60 Hz100 kHz

9. Modified Board 9 Meanwell SP-320-15 Specs: 320W Power Output 120 V 60Hz Input Fixed switching frequency at 100KHz Isolated Power Transfer/ Optocoupler Protections: Short circuit / Overload / Over voltage

10. 10 Power Regulation An optocoupler is used to send isolated voltage regulation information back to primary side of transformer. Secondary Primary Using components with similar electrical characteristics the system can be split in two. Existing optocoupler is a single component package.

11. Finalized Circuit 11

12. 12 How It Was Done Mechanical Design

13. Static Arm Base Station 13 Components: Primary Circuitry Adjustable Core Heat Sink

14. Inductor Mountings 14

15. Spring 15 Rover

16. Ramps 16

17. Final Product 17

18. Production Cost 18 Raw Materials$104.00 Sheet Stock Hardware Labor$160.00 Machining Fabrication Electrical Components$180.00 Power Supply Cores Wire Total Cost$444.00

19. Questions? 19