1. 1 A new infrastructure for high throughput network and application performance measurement. Les Cottrell – SLAC Prepared for the IPAM meeting, UCLA Mar 19 ‘02 http://www.slac.stanford.edu/grp/scs/net/talk/ipam-mar02.html Partially funded by DOE/MICS Field Work Proposal on Internet End-to-end Performance Monitoring (IEPM), also supported by IUPAP

2. 2 PingER deployment Measurements from –34 monitors in 14 countries –Over 600 remote hosts –Over 72 countries –Over 3300 monitor-remote site pairs –Measurements go back to Jan-95 –Reports on RTT, loss, reachability, jitter, reorders, duplicates … Countries monitored –Contain 78% of world population –99% of online users of Internet Lightweight (100bps/host pair) –Very useful for inter-regional and poor links, need more intensive for high performance & Grid sites

3. 3 User interface Eu Data Grid WP7 have extended PingER to throughput measurements (iperf, udpmon …) –Manchester, Daresbury, IN2P3 & UCL SLAC has added iperf, bbcp, bbft measurements to PingER tables –www-iepm.slac.stanford.edu/cgi- wrap/pingtable.pl?dataset=iperfwww-iepm.slac.stanford.edu/cgi- wrap/pingtable.pl?dataset=iperf Metrics: pipechar Iperf Bbcp bbftp

4. 4 Effect of Sep 11 ’02 on unreachability For most sites (median) the effect was not noticeable There was a big peak in unreachability for 10 sites (5%) on Sep 11 &12 All 5 Italian sites lost connectivity for about 24 hours, Padova took 8 days to stabilise BNL took 6 days to stabilize 5 sites (2.5%) took 10 days to recover 2 sites (MX & Montreal) had not recovered by end of month, may have had nothing to do with WTC –MX found blocked ping access in Nov SNV ORN

5. 5 Romania performance from US

6. 6 Losses: World by region, Jan ‘02 5%=bad Russia, S America bad Balkans, M East, Africa, S Asia, Caucasus poor

7. 7 Throughput quality improvements TCP BW < MSS/(RTT*sqrt(loss)) (1) (1) Macroscopic Behavior of the TCP Congestion Avoidance Algorithm, Matthis, Semke, Mahdavi, Ott, Computer Communication Review 27(3), July 1997 China 80% annual improvement ~ factor 10/4yr SE Europe not keeping up

8. 8 Quality improvement seen from SLAC & NASA NASA results courtesy of Andy Germain, NASA, GSFC

9. 9 We need to better understand PingER losses insufficient for high perf links –Need more measurements & ping losses != TCP losses Closer to applications, e.g. FTP Understand how to make throughput measurements: –Duration & frequency (balance impact against granularity needed), –Windows and or vs parallel streams, –OS dependencies, cpu utilization, interface speeds, security (e.g. ssh) –Impact on others, variability on different time-scales –Can we use QBSS, can/should application self limit? –How well does simulation work, how to improve? –How to relate to simpler measurements –How does file transfer work compared to iperf? –Is compression useful and when? –How to steer applications

10. 10 Even with big windows (1MB) still need multiple streams Above knee performance still improves slowly, maybe due to TCP fair share as add more streams ANL, Caltech & RAL reach a knee (between 2 and 24 streams) above this gain in throughput slow

11. 11 IEPM-BW: Main issues being addressed Provide a simple, robust infrastructure for: –Continuous/persistent and one-off measurement of high network AND application performance –management infrastructure – flexible remote host configuration Optimize impact of measurements –Duration, frequency of active measurements, and use passive Integrate standard set of measurements including: ping, traceroute, pipechar, iperf, bbcp … Allow/encourage adding measure/app tools Develop tools to gather, reduce, analyze, and publicly report on the measurements: –Web accessible data, tables, time series, scatterplots, histograms, forecasts … Compare, evaluate, validate various measurement tools and strategies (minimize impact on others, effects of app self rate limiting, QoS, compression…), find better/simpler tools, choose best set Provide simple forecasting tools to aid applications and to adapt the active measurement frequency Provide tool suite for high throughput monitoring and prediction

12. 12 IEPM-BW Deliverables Understand and identify resources needed to achieve high throughput performance for Grid and other data intensive applications Provide access to archival and near real-time data and results for eyeballs and applications: –planning and expectation setting, see effects of upgrades –assist in trouble-shooting problems by identifying what is impacted, time and magnitude of changes and anomalies –as input for application steering (e.g. data grid bulk data transfer), changing configuration parameters –for prediction and further analysis Identify critical changes in performance, record and notify administrators and/or users Provide a platform for evaluating new network tools (e.g. pathrate, pathload, GridFTP, INCITE, UDPmon …) Provide measurement/analysis/reporting suite for Grid & hi-perf sites

13. IEPM-BW Deployment

14. 14 Results so far 1/2 Reasonable estimates of throughput achievable with 10 sec iperf meas. Multiple streams and big windows are critical –Improve over default by 5 to 60. –There is an optimum windows*streams Continuous data at 90 min intervals from SLAC to 33 hosts in 8 countries since Dec ‘01

15. 15 Results so far 2/2 0400 Disk Mbps 80 Iperf Mbps 1MHz ~ 1Mbps Bbcp mem to mem tracks iperf BBFTP & bbcp disk to disk tracks iperf until disk performance limits High throughput affects RTT for others –E.g. to Europe adds ~ 100ms –QBSS helps reduce impact Archival raw throughput data & graphs already available via http

16. 16 E.g. Iperf vs File copy (mem-to-mem) 0 400 350 Iperf TCP Mbits/s File copy mem to mem File copy mem to mem ~ 72% iperf

17. 17 E.g. Iperf vs file copy disk to disk 0 400 100 Iperf TCP Mbits/s File copy disk-to-disk Fast Ethernet OC3 Disk limited Over 60Mbits/s iperf >> file copy

18. 18 Windows and Streams 1/2 Now well accepted that multiple streams and/or big windows are important to achieve optimal throughput Can be unfriendly to others Optimum windows & streams changes with changes in path So working on new methods to predict both windows & streams automatically & optimize –Netest from LBNL uses UDP& TCP Predicts window sizes and streams using packet streams, UDP & TCP Needs to be validated –Brute force: run iperf multi windows & streams & find optimum, need to automate measurement & analysis –Only need to run occasionally or when suspect change e.g. Step change in number of hops or RTT or other measurement

19. 19 Optimizing streams & flows vs losses Throughput =  i=1,n (MSS i /(RTT i /sqrt(loss i )) (1) ~ (MSS/RTT)  (1/sqrt(loss i ) ~ [n*MSS]/(RTT*sqrt(loss)) So problem reduces to optimizing throughput w.r.t. loss (2) (2) “The End-to-End Performance Effects of parallel TCP sockets on a Lossy Wide-Area network”, Hacker & Athey, Proc 16 th Int Parallel & Distributed Processing Symposium, Ft Lauderdale, FL April 2002

20. 20 Effect of saturation If keep below knee then RTT stays low

21. 21 Estimated vs measured throughput Est BW~C*Streams*MSS/(RTT*sqrt(loss)) (Mathis et. al. & Hacker) Measure retransmissions using Web100, loss~Retransmissions/total packet Note high degree of correlation (R^2 >0.9) If window large enough ((>=128KB) then ~ common relation, window threshold varies from link to link

22. 22 Forecasting Given access to the data one can do real-time forecasting for –TCP bandwidth, file transfer/copy throughput E.g. NWS, Predicting the Performance of Wide Area Data Transfers by Vazhkudai, Schopf & Foster Developing simple prototype using average of previous measurements –Validate predictions versus observations –Get better estimates to adapt frequency of active measurements & reduce impact Also use ping RTTs and route information –Look at need for diurnal corrections –Use for steering applications Working with NWS for more sophisticated forecasting Can also use on demand bandwidth estimators (e.g. pipechar, but need to know range of applicability)

23. 23 Forecast results 33 nodesIperf TCP Bbcp mem Bbcp disk bbftppipechar Average % error 13% +- 11% 23% +- 18% 15% +-13% 14% +-12% 13% +-8% Predict=Moving average of last 5 measurements +-  Iperf TCP throughput SLAC to Wisconsin, Jan ‘02 100 60 Mbits/s x Predicted Observed % average error = average(abs(observe-predict)/observe)

24. 24 Passive (Netflow) 1/2 Use Netflow measurements from border router –Netflow records time, duration, bytes, packets etc./flow –Calculate throughput from Bytes/duration for big flows (>10MB) –Validate vs. iperf, bbcp etc. –No extra load on network, provides other SLAC & remote hosts & applications, ~ 10-20K flows/day, 100-300 unique pairs/day

25. 25 Passive 2/2 Mbits/s Date 0 450 Iperf SLAC to Caltech (Feb-Mar ’02) 0 80 Mbits/s Date Bbftp SLAC to Caltech (Feb-Mar ’02) + Active + Passive + Active + Passive Iperf matches well BBftp reports under what it achieves

26. 26 Compression 60Mbyte Objectivity file, using zlib, 8 streams, 64KB window Can improve throughput on this link with these hosts (Sun Ultra Sparcs with 360MHz cpus) by more than a factor of 2. Working on formula f(file compressibility, host MHz, link Mbits/s) whether compression is worth it

27. 27 Impact on Others Make ping measurements with & without iperf loading –Loss loaded(unloaded) –RTT Looking at how to avoid impact: e.g. QBSS/LBE, application pacing, control loop on stdev(RTT) reducing streams, want to avoid scheduling

28. 28 Pings to host on show floor Priority: 9+-2 ms BE: 18.5+-3ms QBSS:54+-100 ms SC2001 QBSS demo Send data from 3 SLAC/FNAL booth computers (emulate a tier 0 or 1 HENP site) to over 20 other sites with good connections in about 6 countries –Iperf TCP throughputs ranged from 3Mbps to ~ 300Mbps Saturate 2Gbps connection to floor network –Maximum aggregate throughput averaged over 5 min. ~ 1.6Gbps Apply QBSS to highest performance site, and rest BE 100 0 Time Mbits/s Iperf TCP Throughput Per GE interface QBSS No QBSS 5mins

29. 29 Possible HEP usage of QBSS Apply priority to lower volume interactive voice/video-conferencing and real time control Apply QBSS to high volume data replication Leave the rest as Best Effort Since 40-65% of bytes to/from SLAC come from a single application, we have modified to enable setting of TOS bits Need to identify bottlenecks and implement QBSS there Bottlenecks tend to be at edges so hope to try with a few HEP sites

30. 30 Possible scenario BaBar user wants to transfer large volume (e.g. TByte) of data from SLAC to IN2P3: –Select initial windows and streams from a table of pre-measured optimal values, or use an on demand tool (extended iperf), or reasonable default if none available Application uses data volume to be transferred and simple forecast to estimate how much time is needed –Forecasts from active archive, Netflow, on demand use one-end bandwidth estimation tools (e.g. pipechar, NWS TCP throughput estimator) –If estimate duration is longer than some threshold, then more careful duration estimate is made using diurnal forecasting –Application reports to user who decides whether to proceed Application turns on QBSS and starts transferring –For long measurements, provide progress feedback, using progress so far, Netflow measurements of this flow for last few half hours, diurnal corrections etc. –If falling behind required duration, turn off QBSS, go to best effort –If throughput drops off below some threshold, check for other sites

31. 31 Experiences Getting ssh accounts and resources on remote hosts –Tremendous variation in account procedures from site to site, takes up to 7 weeks, requires knowing somebody who cares, sites are becoming increasingly circumspect –Steep learning curve on ssh, different versions Getting disk space for file copies (100s Mbytes) –Diversity of OSs, userids, directory structures, where to find perl, iperf..., contacts Required database to track –Also anonymizes hostnames, tracks code versions, whether to execute command (e.g. no ping if site blocks ping) & with what options, Developed tools to download software and to check remote configurations –Remote server (e.g. iperf) crashes: Start & kill server remotely for each measurement –Commands lock up or never end: –Time out all commands Some commands (e.g. pipechar) take a long time, so run infrequently AFS tokens to allow access to.ssh identity timed out, used trscron –Protocol port blocking –Ssh following Xmas attacks; bbftp, iperf ports, big variation between sites –Wrote analyses to recognize and worked with site contacts Ongoing issue, especially with increasing need for security, and since we want to measure inside firewalls close to real applications Simple tool built for tracking problems

32. 32 Next steps Develop/extend management, analysis, reporting, navigating tools – improve robustness, manageability, workaround ssh anomalies Get improved forecasters and quantify how they work, provide tools to access Optimize intervals (using forecasts, and lighter weight measurements) and durations Evaluate use of compression Evaluate self rate limiting application (bbcp) Tie in passive Netflow measurements Add gridFTP (with Allcock@ANL), UDPmon (RHJ@manchester) & new BW measurers – netest (Jin@LBNL), INCITE (Reidi@Rice), pathrate, pathload (Dovropolis@Udel)Allcock@ANLReidi@Rice –Make early data available via http to interested & “friendly” researchers –CAIDA for correlation and validation of Pipechar & iperf etc. (sent documentaion) –NWS for forecasting with UCSB (sent documentation) Understand correlations & validate various tools, choose optimum set Make data available by std methods (e.g. MDS, GMA, …) – with Dantong@BNL, Jenny Schopf@ANL & Tierney@LBNLDantong@BNL Schopf@ANL Make tools portable, set up other monitoring sites, e.g. PPDG sites –Working with INFN/Trieste to port –Work with NIMI/GIMI to evaluate deploying dedicated engines –More uniformity, easier management, greater access granularity & authorization Still need non dedicated: Want measurements from real application hosts, closer to real end user Some apps may not be ported to GIMI OS –Not currently funded for GIMI engines –Use same analysis, reporting etc.

33. 33 More Information IEPM/PingER home site: –www-iepm.slac.stanford.edu/www-iepm.slac.stanford.edu/ Bulk throughput site: –www-iepm.slac.stanford.edu/monitoring/bulk/www-iepm.slac.stanford.edu/monitoring/bulk/ SC2001 & high throughput measurements –www-iepm.slac.stanford.edu/monitoring/bulk/sc2001/www-iepm.slac.stanford.edu/monitoring/bulk/sc2001/ Transfer tools: –http://dast.nlanr.net/Projects/Iperf/release.htmlhttp://dast.nlanr.net/Projects/Iperf/release.html –http://doc.in2p3.fr/bbftp/http://doc.in2p3.fr/bbftp/ –www.slac.stanford.edu/~abh/bbcp/www.slac.stanford.edu/~abh/bbcp/ –http://hepwww.rl.ac.uk/Adye/talks/010402-ftp/html/sld015.htmhttp://hepwww.rl.ac.uk/Adye/talks/010402-ftp/html/sld015.htm TCP Tuning: –www.ncne.nlanr.net/training/presentations/tcp-tutorial.pptwww.ncne.nlanr.net/training/presentations/tcp-tutorial.ppt –www-didc.lbl.gov/tcp-wan.htmlwww-didc.lbl.gov/tcp-wan.html QBSS measurements –www-iepm.slac.stanford.edu/monitoring/qbss/measure.htmlwww-iepm.slac.stanford.edu/monitoring/qbss/measure.html

34. 34 Further slides

35. 35 0 400 300 Iperf TCP Mbits/s Working with Developer. Not using TCP, but should track Pipechar disagrees badly above 100Mbits/s (6 hosts, 20%), 50% of hosts have reasonable agreement Pipechar min throughpt Mbits/s E.g. iperf vs pipechar

36. 36 Optimizing CPU vs window vs streams vs throughput MHz ~ 0.97 * Mbps Bigger windows = less cpu for fixed throughput Increasing window Increasing streams Hooks at end = saturation

37. 37 Typical QBSS test bed Set up QBSS testbed Configure router interfaces –3 traffic types: QBSS, BE, Priority –Define policy, e.g. QBSS > 1%, priority < 30% –Apply policy to router interface queues 10Mbps 100Mbps 1Gbps Cisco 7200s

38. 38 Example of effects Also tried: 1 stream for all, and priority at 30%, 100 Mbps & 2 Gbps bottlenecks 2Gbps challenge to saturate: did at SC2001, 3 Linux cpus with 5*1 Gbps NIC cards and 2 Gbps trunk from subnet to floor network, sending to 17 hosts in 5 countries Kicks in fast (<~ 1 s)

39. 39 Impact on response time (RTT) Run ping with Iperf loading with various QoS settings, iperf ~ 93Mbps –No iperf ping avg RTT ~ 300usec (regardless of QoS) –Iperf = QBSS, ping=BE or Priority: RTT~550usec 70% greater than unloaded –Iperf=Ping QoS (exc. Priority) then RTT~5msec > factor of 10 larger RTT than unloaded

40. 40 File Transfer Used bbcp (written by Andy Hanushevsky) –similar methodology to iperf, except ran for file length rather than time, provides incremental throughput reports, supports /dev/zero, adding duration –looked at /afs/, /tmp/, /dev/null –checked different file sizes Behavior with windows & streams similar to iperf Thru bbcp ~0.8*Thru iperf For modest throughputs (< 50Mbits/s) rates are independent of whether destination is /afs/, /tmp/ or /dev/null. Cpu utilization ~ 1MHz/Mbit/s is ~ 20% > than for iperf

41. 41 Application rate-limiting Bbcp has transfer rate limiting –Could use network information (e.g. from Web100 or independent pinging) to bbcp to reduce/increase its transfer rate, or change number of parallel streams No rate limiting, 64KB window, 32 streams 15MB/s rate limiting, 64KB window, 32 streams