Download presentation
Presentation is loading. Please wait.
1
Temperature Prediction
3
ASOS Temperature/Humidity Senor
4
Why Can’t Use Model Output Directly for Temp Forecasts? Model surface/2m height may be very different than real elevation due to limited horizontal/vertical resolution. (e.g., MM5 36 km surface elevation for Boeing Field is 256 m, should be 5 m)
7
Model resolution may be inadequate to properly simulate the temperature effects of important features such as: –Narrow gaps, such as the Fraser River Valley or the Columbia River Gorge. –Land/water contrasts, such as around Puget Sound or along the coast.
8
Near Sea Level Gap On Border of WA and OR
9
Domain Definition
10
Portland The Dalles Portland The Dalles Pass Height = 600 m 36 km grid spacing12 km grid spacing Pass Height = 700 m
11
Portland The Dalles Pass Height = 600 m 12 km grid spacing Portland Cascade Locks The Dalles 4 km grid spacing Pass Height = 400 m
12
1.33 km grid spacing, Pass Height = 150 m Portland Troutdale The DallesCascade Locks
13
444.4 m grid spacing, Pass Height = 100 m PortlandTroutdaleCascade Locks
14
T on 150 m Surface Portland Troutdale
15
Model temperatures may be seriously in error due to poor model physical parameterizations, such as for the planetary boundary layer, radiation, surface energy fluxes, cloud and precipitation processes. –Example: overmixing in PBL can result in the inability to maintain shallow cold air masses. –Example 2: improper soil moisture (too warm or dry) can greatly influence temperatures. As a result of such errors, models can have serious systemic temperature biases.
16
Shallow Fog…Nov 19, 2005 Held in at low levels for days MM5 held in the inversion…generally without the shallow mixed layer of cold air a few hundred m deep MM5 could not maintain the moisture at low levels
23
Temperature Biases Large temperature biases can occur at certain times: –When there is a shallow layer of cold air (few hundred m deep) that is mixed out. –During transition season (particularly spring, when land surface conditions are problematic) –During summer during warm periods.
24
00 UTC
25
12 UTC
26
Downslope Warming Large warming during downslope flow Often large over Cascade foothills (North Bend), but apparent all over the world, including to the lee (east) of the Rockies--the Chinook Wind. In Europe called the Foehn Wind. Uusually, air comes from mid-levels where potential temperature is higher than at the surface. A drop in dewpoint usually accompanies it.
34
Diabatic Effects
35
Diabatics Radiation: –direct radiational heating and cooling of the air is relatively small –indirectly, very large through modulation of ground temperature and communication into the boundary layer by turbulence. Surface heating by the solar flux and nighttime cooling by IR flux dominate surface temperatures. –Clouds have a major effect on radiational heating/cooling.
36
Clouds, Radiation and Surface Temps Clouds lessen warming during day by lessening solar radiation Clouds decrease cooling at night by intercepting IR radiation and reradiating IRback to the surface. Thin cirrus…only minor influence (1-2F) Thick altostratus--5-10F influence or more.
38
IR Opacity of Air Can Influence Surface Temps IR opacity is proportional to humidity. Increased water vapor content increases opacity--better absorption and emission in IR. Less water vapor results in better IR cooling under clear conditions. That is why deserts cool very rapidly at night. Why Washington DC stays hot all night.
39
Conduction and Turbulence Effects in the BL.
40
Phase Changes of Water and Temperatureq Evaporation and melting can cool Condensation and deposition can warm
44
Snohomish, WA April 4, 2005
47
SE Everett
56
Comparison of the daily temperature cycle between observations (blue dashed) and the model (red triangles) for a coastal location (Boston, MA) on 10 August 1997 impacted by the passage of a sea breeze front.
57
2-m air temperature and 10-m wind velocity in the afternoon of a sea breeze event on April 18, 2005. The land-sea temperature contrast drives the onshore sea breeze. Local spatial variations in sea surface temperature (SST) can leave a signature on the sea breeze, especially when complex coastlines create multiple sea breeze fronts (e.g., the sea breeze penetrating from Long Island Sound in the image above). In our multiply-nested COAMPS simulations, nest 4 (1.33 km resolution) and nest 5 (0.44 km resolution) were enhanced to account for urban effects and to include time-varying (hourly) high-resolution SST's from Alan Blumberg's New York Harbor Observing and Prediction system (NYHOPS). The diurnal heating of the ocean surface is thus represented in our simulations. We are in the process of quantifying the impact of these effects on the sea breeze circulation for several distinct events, and evaluating the forecast skill of the system.
66
The Onshore or Marine Push Major temperature modulator during summer along West Coast Important over SE Australia, S. Africa, and western coast of South America
71
Domain Definition
72
1.33 km grid spacing, Pass Height = 150 m Portland Troutdale The DallesCascade Locks
73
444.4 m grid spacing, Pass Height = 100 m PortlandTroutdaleCascade Locks
74
T on 150 m Surface Portland Troutdale
75
Southerly Buster…SE Australia…just like the push
76
MOS Compared to the NWS: Temperature
77
Cool Season Mi. Temp – 12 UTC Cycle Average Over 80 US stations
78
MAE ( F) for the seven forecast types for all stations, all time periods, 1 August 2003 – 1 August 2004. Temperature
79
MAE for each forecast type during periods of large temperature change (10 F over 24-hr), 1 August 2003 – 1 August 2004. Includes data for all stations. Large one-day temp changes
80
MAE for each forecast type during periods of large departure (20 F) from daily climatological values, 1 August 2003 – 1 August 2004.
81
Number of days each forecast is the most accurate, all stations. In (a), tie situations are counted only when the most accurate temperatures are exactly equivalent. In (b), tie situations are cases when the most accurate temperatures are within 2 F of each other. Looser Tie Definition
82
Number of days each forecast is the least accurate, all stations. In (a), tie situations are counted only when the least accurate temperatures are exactly equivalent. In (b), tie situations are cases when the least accurate temperatures are within 2 F of each other. Looser Tie Definition
83
Time series of MAE of MAX-T for period one for all stations, 1 August 2003 – 1 August 2004. The mean temperature over all stations is shown with a dotted line. 3-day smoothing is performed on the data. Highly correlated time series
84
Time series of bias in MAX-T for period one for all stations, 1 August 2003 – 1 August 2004. Mean temperature over all stations is shown with a dotted line. 3-day smoothing is performed on the data. Cold spell
85
MAE for all stations, 1 August 2003 – 1 August 2004, sorted by geographic region. MOS Seems to have the most problems at high elevation stations.
86
Bias for all stations, 1 August 2003 – 1 August 2004, sorted by geographic region.
87
Precipitation Comparisons
88
Brier Scores for Precipitation for all stations for the entire study period.
89
Brier Score for all stations, 1 August 2003 – 1 August 2004. 3-day smoothing is performed on the data.
90
Prob. Of Precip.– Cool Season (0000/1200 UTC Cycles Combined)
91
Portland wind distribution for all days by direction and speed Wind distribution for days with snowfall Wind distribution for days with Freezing Rain Wintry precipitation at PDX –Almost exclusively E or SE –Tendency towards E for snow and SE for freezing rain
92
Strong winds for nearly four days –Gale force a times Wintry mix in Western Gorge and exit area. –Little snow accumulation but significant icing. Selected because: –Data availability was good (esp. ACARS) –Model Initialization ok December 11-15, 2000 Case Study
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.