Download presentation
Presentation is loading. Please wait.
1
Using Geodetic Rates in Seismic Hazard Mapping March 30, 20011 Geodetic and Geologic slip rate estimates for earthquake hazard assessment in Southern California Ken Hudnut USGS March 30, 2001 University of Utah
2
Using Geodetic Rates in Seismic Hazard Mapping March 30, 20012 North American and Pacific plate relative motions - is it 52 or 56 mm/yr? San Andreas fault zone - is it 22 mm/yr or 34 mm/yr along the Mojave segment? Eastern California Shear Zone –Estimated rates range between 6 and 12 mm/yr (geological & geodetic) –Is this difference in rates real? –Does it indicate elevated strain rate during a clustering of seismic (and aseismic) events? –Is the ECSZ energetically ‘easier’ than the Big Bend? Different path integrals yield differences Measuring rates by geology or geodesy are both difficult and prone to pitfalls
3
Using Geodetic Rates in Seismic Hazard Mapping March 30, 20013 SCEC crustal motion map Combined EDM, VLBI, survey-mode and continuous GPS rigorously Released as a SCEC product Set the bar very high for the SCIGN project
4
Using Geodetic Rates in Seismic Hazard Mapping March 30, 20014 SCEC Crustal Motion Map - Version 3 315 GPS vectors added for a total of 678 vectors (version 2 had 363 vectors) Early SCIGN site velocities now included Version 3 will include time series for all stations
5
Using Geodetic Rates in Seismic Hazard Mapping March 30, 20015 Generalized fault map of southern California with known slip rates circa 1990 from Tom Rockwell’s SCEC2 talk
6
Using Geodetic Rates in Seismic Hazard Mapping March 30, 20016 Effects of lower crust viscosity on geodetic velocity field Weak lower crust => large variations in time Strong lower crust early late Borrowed from Brad Hager’s SCEC2 talk ‘Spectacular’ Agreement In Carrizo Plain Rates may disagree the most where the lower crust is the weakest…
7
Using Geodetic Rates in Seismic Hazard Mapping March 30, 20017 Examples of differences in rate Garlock fault –Geologic rate 7 +/- 2 mm/yr –Geodetic rate 2 +/- 2 mm/yr –Geodesy weak lower crust Eastern California Shear Zone –Geologic rate summed over all faults is ~6 mm/yr –Geodetic rate across ECSZ is ~10–12 mm/yr –Geodesy > Geology => clustering or new higher tectonic rate? Imperial Valley –Geologic rate of 20 mm/yr –Geodetic rate across valley of ~50 mm/yr => missing a major fault? Sierra Madre – Cucamonga fault zone –Geologic rate of 0.5 mm/yr –Geodetic rate of a Raymond fault –Geologic rate of 1.5-4 mm/yr –Geodetic rate of b a + b ~ 6-8 mm/yr
8
Using Geodetic Rates in Seismic Hazard Mapping March 30, 20018 Conclusions In the past decade, our understanding of rates has changed quite radically in So. Calif. – both in terms of geodetic and geologic estimates Where we now think there are differences, it is important to confirm the observations and then attempt to explain the differences Possible to explain these differences in a variety of ways –Bad data (e.g., missing a fault, off-fault deformation, etc.) –Bad modelling (e.g., dipping fault & layered structure, or variable strength modelled as elastic half-space) –Weak lower crust or strong lower crust (earthquake cycle) Hypothesis testing approach needed where rates differ Don’t assume geologic rate to be correct as a default position
Similar presentations
© 2024 SlidePlayer.com. Inc.
All rights reserved.