1. ENGR 215 ~ Dynamics Sections 16.6

2. Relative Motion Analysis

4. Instantaneous Center of Zero Velocity In this section we learn to solve problems similar to Section 16.5, we just use a different technique. I do not care which method you use.

5. Relative Motion Analysis

6. Instantaneous Center of Zero Velocity

7. Location of the IC The velocity of a point on a body is always perpendicular to the relative position vector extending from the IC to the point.

8. Case 1: Location of IC Given the velocity v A of Point A on a body and the angular velocity ω of the body.

9. Case 2: Location of IC Given the line of action of two-non parallel velocities v A and v B.

10. Case 3: Location of IC Given the magnitude and direction of to parallel velocities v A and v B.

11. The point chosen as the instantaneous center of zero velocity can only be used for an instant in time since the body changes its position from one instant to the next.

12. Lecture Example 1: Find the velocity vector at Point B when θ=10° and when ω=2π rad/sec. The radius of the wheel is 1 meter. Assume the wheel will roll.

13. Lecture Example 2: Determine the velocity of the piston C at Φ=30° and the angular velocity of BC.

14. Lecture Example 3: Determine the velocity of Point B and Point E on the Bar BC at instant given below.