Presentation is loading. Please wait.

Presentation is loading. Please wait.

ELECTRICITY for kitchens & baths. Electricity Amber.

Similar presentations


Presentation on theme: "ELECTRICITY for kitchens & baths. Electricity Amber."— Presentation transcript:

1 ELECTRICITY for kitchens & baths

2 Electricity Amber

3 Electricity We know that electricity behaves in a consistent predictable manner, in given situations, but electricity has never clearly been defined. Atoms –neutrons, protons and electrons  Atoms are neutrally charged  Most of the weight of an atom is found in the protons and neutrons.  Protons are more or less attached to the nucleus  Electrons revolve around the nucleus like planets revolve around the sun

4 Electricity Atom

5 Electricity Some electrons, particularly in metals are loosely bound and can detach and become “free electrons” Free electrons as the name implies can move freely from atom to atom When a force or pressure is applied free electrons begin to move

6 Electricity The materials that allow this movement are called CONDUCTORS The three metals that make the best conductors:  Silver  Copper  Aluminum

7 Electricity Copper Atom

8 Electricity Silver atom

9 Electricity Insulators or Non Conductors:  Dry Wood  Glass  Rubber  Mica  Asbestos Semi-Conductors:  Silicon

10 Electricity Charged Bodies Like charges repel Unlike charges attract

11 Electricity Electrical energy is transferred through conductors by means of movement of free electrons A material’s ability to conduct current flow determines whether it is a good or bad conductor

12 Electricity Terms Voltage Amperage (current) Resistance (Ohms) Wattage (power)

13 Electricity

14 The force that moves electrons in a conductor can be called VOLTAGE

15 Electricity voltage Current that flows through electrical conductors is directly proportional to the difference in potential Current is directly proportional to the amount of voltage Voltage increases – current increases Voltage decreases- current decreases

16 Electricity voltage Six Methods of Producing Voltage Friction – Static electricity Pressure – Compression of crystals Heating – In copper, electrons move away from the heat. In iron they move to the heat. Light – Photoelectric cells Chemical Action - Batteries Magnetism

17 Electricity charge What is Charge? The stuff inside conductors It’s the free electrons How do we measure charge? 1 Coulomb = 6.28 x 10 18 electrons 6,280,000,000,000,000,000 Ampere = 1 coulomb of charge flow per second

18 Electricity charge The copper wire is full of “charged stuff” but there is no movement

19 Electricity charge

20 The battery drives the ring of charge into motion, the charge moves along like a drive belt, and the light bulb filament “rubs” against the moving charge which makes it glow white hot.

21 Electricity charge The higher the amperage the faster charge stuff moves The more charge stuff that flows (though a larger wire) the higher the amperage A fast flow through a narrow wire can have the same amps as a slow flow of charge through a bigger wire. If you keep the speed constant and increase the size of the wire you also increase the amperage

22 Electricity watts Watts is the name given to electrical flow – but what flows? Energy Energy is measures in joules A joule of electrical energy can move from place to place along the wires. The amount of energy that flows in one second is one watt

23 Electricity btu’s BTU short for British thermal unit, a British standard unit of energy. One Btu is equal to the amount of heat required to raise the temperature of one pound of liquid water by 1 degree Fahrenheit at its maximum density, which occurs at a temperature of 39.1 degrees Fahrenheit. One Btu is equal to approximately 251.9 calories or 1055 joules. As a rough guide, 1 joule is the absolute minimum amount of energy required (on the surface of Earth) to lift a one kilogram object up by a height of 10 centimetres.

24 Electricity closed circuits A closed loop of wire is not necessarily a circuit unless voltage is present. In any electric circuit where electrons move around, three things are present:  Voltage  Current  Resistance

25 Electricity closed circuits The physical pathway for current flow is actually the circuit and it’s resistance controls the amount of current flow around the circuit. By knowing any two of the three quantities, the third can be calculated.

26 Electricity ohms law Ohms Law – The current in a circuit is directly proportional to the applied voltage and indirectly proportional to the circuits resistance. I = current measured in amperes (amps) E = Voltage R = Resistance in Ohms

27

28 Electricity ohms law Battery = 1.5 volts Resistance = 1.5 ohms Amperes = ? Amperes = 1

29 Electricity ohms law Battery = 3 volts Resistance = 1.5 ohms Amperes = ? Amperes = 2

30 Electricity ohms law Battery = 1.5 volts Resistance = 3 ohms Amperes = ? Amperes =.5

31 Electricity ohms law Another way of writing ohms law:

32 Electricity watts Watts is the name given to electrical flow – but what flows? Energy Energy is measures in joules A joule of electrical energy can move from place to place along the wires. The amount of energy that flows in one second is one watt

33 Electricity watts Power pertains to the rate at which work is being done. Work is done whenever a force causes motion i.e. when voltage causes electrons to move in a circuit work is done The rate at which this work is done is called the electric power rate and is measured in WATTS

34 Electricity watts power Watts = the amount of voltage across a circuit x the current through the circuit or Watts = Volts x Amperes or P= EI

35 Electricity watts power

36

37

38

39 15amp circuit *120volts =1800watts 100watt bulb*10 =1000watts

40 Electricity What you need to remember Voltage – The force that moves electrons in a conductor. Electrical pressure Amperage – The rate of flow of electrical current. Watts – The measure of the amount of electrical power. Watts = Volts X Amps

41

42

43

44

45

46 Kitchen Electricity Circuits Four types of circuits for the Kitchen  General Lighting  Small Appliance  Individual Appliance  Ground Fault Circuit Interrupter

47 Electricity Circuits General Lighting – rules of thumb  One 15 amp circuit per 600 square feet Rule of thumb – 12 outlets  Or one 20 amp circuit per 800 square feet Rule of thumb – 16 outlets Note: Lights in kitchens and baths must be permanently wired.

48 Kitchen Electricity Circuits Receptacle Circuits – Rule of thumb 12 receptacles for a 15-amp circuit 16 receptacle for a 20-amp circuit Small appliance circuits  Two 20-amp circuits  One or more 20-amp circuits in the dining room or family room  These circuits may not be used for lighting

49 Electricity circuits Individual Appliance Circuits are dedicated to devices that draw enough current to warrant their own circuit.

50 Electricity circuits Appliance Voltage Garbage Disposer 120 Electric Range/Cooktop 240 Gas Range/Cooktop 120 Dishwasher 120 Electric Tankless Hot Water 240 Refrigerator 120 Microwave Oven 120 Exhaust Fan 120 Breaker Capacity Amps 20 50 20 20 30 20

51 Electricity circuits Ground Fault Circuit Interrupter circuits are required for receptacles within 6 feet of a water source, such as a faucet or showerhead. Most receptacles mounted above a kitchen countertop or bath lavatory fall into that category. Receptacles that serve countertops must be spaced 4’ apart For Universal Design place receptacles serving countertop spaces lower than 44” AFF.

52 Electricity Wiring Island receptacles no more than 12” below the countertop surface. Smoke detectors at least 12’ from kitchen

53 Electricity Kitchen Wiring Kitchen Wiring  Dedicated circuit for the dishwasher  Dedicated circuit for the disposer  Dedicated circuit for built-in microwaves  At least two 20 amp dedicated small appliance circuits for the outlets serving the countertops  All outlets serving the countertop surface to be GFCI protected  Dedicated range/cooktop/oven circuits  Lighting Circuit  General receptacles for the room 6’ from the doorway and then every 12’

54 Electricity Bath Wiring All Receptacles on dedicated circuit (GFCI) One Receptacle installed within 36” of the sink (GFCI) No receptacles placed within the tub or shower space. No switches can be located within reach of a person standing in the tub or shower, unless part of a listed tub or shower assembly

55 Electricity Bath Wiring Special Needs Hard wire electric towel warmers or lighted or lighted magnifying mirrors Individual circuits for electrical resistance heaters and electric floor heat Wiring for ceiling heaters and ventilation systems Individual circuit for spas, whirlpools, steam showers, some toilets and bidets Hard wire anti-fog mirrors behind glass Cloths washer/dryer

56 Electricity Outdated Wiring The house is over 30 years old A fuse box 100 Amp breaker panel Ungrounded Aluminum wire

57 Electricity Outdated Wiring No GFCI’s are not present Lights flicker when appliances cycle Fuses blow Too few switches and receptacles or lights present Extension cords must be used

58 Electricity wire types

59 Electricity Wiring Size 15 Amp Circuit – 14 gauge 20 Amp Circuit – 12 gauge 30 Amp Circuit – 10 gauge 40 Amp Circuit – 8 gauge 50 Amp Circuit – 6 gauge

60 Electricity wire

61 Electricity circuits Adding Circuits to the Breaker Panel Consult your electrician

62 Electrical Codes

63 Codes for Kitchens Countertop receptacles every 4’-0”

64 Codes for Kitchens Sinks, stoves, & cooktops act divide countertops

65 Plug Strips

66 Codes for Kitchens Receptacles no higher than 20” above countertop Receptacles no more than 12” below countertop

67 Codes for Kitchens Islands must be served by at least one receptacle

68 Codes for Kitchens Peninsulas are measured from the connecting edge

69 Power Grommet

70 Codes for Kitchens Receptacles serving countertops must be on 2 dedicated 20amp circuits and must be GFCI protected. They must also serve the dining room and pantry if applicable. Lighting may not be included in these curcuits

71 Codes for Baths At least one receptacle within 3’-0” of the outside edge of each basin Vertical location same as kitchen This receptacle cannot be inside a medicine cabinet Receptacle must be powered by a 20 amp circuit with no other outlets. May serve two bathrooms and may power an exhaust fan and lighting provided it does not exceed the load max. Must be GFCI protected

72 Codes for Baths No receptacles over a bathtub or inside a shower stall.

73 Electrical Symbols

74 Electricity outlet symbols

75

76 Electricity symbols

77 Electricity outlet symbols

78

79

80 Electricity lighting symbols

81

82

83

84

85

86

87

88 Electricity special purpose symbols

89

90

91

92 Electricity switch symbols Single pole switch Double pole switch Three way switch Four way switch Single pole switch w/ dimmer Three way switch w/dimmer

93


Download ppt "ELECTRICITY for kitchens & baths. Electricity Amber."

Similar presentations


Ads by Google