Presentation is loading. Please wait.

Presentation is loading. Please wait.

EDGE™ MAV Control System Project # P09122 Concept Design Progress.

Published by Modified over 9 years ago

Similar presentations

Presentation on theme: "EDGE™ MAV Control System Project # P09122 Concept Design Progress."— Presentation transcript:

1 EDGE™ MAV Control System Project # P09122 Concept Design Progress

2 EDGE™ Overall System Concept

3 EDGE™ Control System Concept PID Feedback Control for Each Input

4 EDGE™ Control System Concept Preliminary Control System Design

5 EDGE™ Microcontroller Concepts Concepts –Last Year’s O-Navi Controller –Purchase different commercial fully developed board –Design and build from parts

6 EDGE™ Microcontroller Concepts Microcontroller Design Concepts –MCU only –MCU and FPGA –FPGA only

7 EDGE™ Sensor Concepts Needed Measurements –3-Axis Translation –3-Axis Rotation –Airspeed –Altitude –Angle of Attack 1 st Choice2 nd Choice

8 EDGE™ Test Stand Concept Multi-Axis Controlled Test Stand

9 EDGE™ Test Stand Motor Concepts Motors –Servo Motors –Drive Motors –Stepper Motors Analysis in Progress

Download ppt "EDGE™ MAV Control System Project # P09122 Concept Design Progress."

Similar presentations

Sec 1-4 Concepts: Classifying Angles Objectives: Given an angle, name, measure and classify it as measured by a s.g.

Sec 1-4 Concepts: Classifying Angles Objectives: Given an angle, name, measure and classify it as measured by a s.g.
DiceBot is a robot that throws a dice instead of human when detecting sound of clap. Dice.

DiceBot is a robot that throws a dice instead of human when detecting sound of clap. Dice.
MCECS Guide Robot Project Project Update 5/23/2012.

MCECS Guide Robot Project Project Update 5/23/2012.
Blake Davis: Electrical Engineering Luke Haberkern: Electrical and Computer Engineering Brian Hacsi: Electrical and Computer Engineering Chris Kircher:

Blake Davis: Electrical Engineering Luke Haberkern: Electrical and Computer Engineering Brian Hacsi: Electrical and Computer Engineering Chris Kircher:
General Rule: Don’t reinvent the wheel. Use your time wisely. If something already exists that will serve your purpose, then it is probably a good idea.

General Rule: Don’t reinvent the wheel. Use your time wisely. If something already exists that will serve your purpose, then it is probably a good idea.
Guitar Neck Duplicator By Eric Hall. Problem To design a device that fabricates a rough (not sanded) guitar neck out of a stock piece of wood by following.

Guitar Neck Duplicator By Eric Hall. Problem To design a device that fabricates a rough (not sanded) guitar neck out of a stock piece of wood by following.
EET 2261 Unit 13 Controlling Stepper Motors and Servos  Read Almy, Chapter 21.  Lab #13 due next week.  Final Exam next week.

EET 2261 Unit 13 Controlling Stepper Motors and Servos  Read Almy, Chapter 21.  Lab #13 due next week.  Final Exam next week.
L.

L.
MOTORS.  Need a Motor That is Capable of Moving the Mirrors to a Fairly Precise Angle.

MOTORS.  Need a Motor That is Capable of Moving the Mirrors to a Fairly Precise Angle.
Motion Tracking Recorder 360 (MTR-360) Group #1 Lee Estep Philip Robertson Andy Schiestl Robert Tate.

Motion Tracking Recorder 360 (MTR-360) Group #1 Lee Estep Philip Robertson Andy Schiestl Robert Tate.
Reegan Worobec & David Sloan In collaboration with UAARG.

Reegan Worobec & David Sloan In collaboration with UAARG.
EDGE™ MAV Control System Project # P09122 Erik Bellandi – Project Manager Ben Wager – Lead Engineer Garrett Argenna – Mechanical Engineering Michael Pepen.

EDGE™ MAV Control System Project # P09122 Erik Bellandi – Project Manager Ben Wager – Lead Engineer Garrett Argenna – Mechanical Engineering Michael Pepen.
EDGE™ MAV Control System - P09122 - Management Review (MSD I) Erik Bellandi – Project Manager Ben Wager – Lead Engineer Garrett Argenna – Mechanical Engineering.

EDGE™ MAV Control System - P Management Review (MSD I) Erik Bellandi – Project Manager Ben Wager – Lead Engineer Garrett Argenna – Mechanical Engineering.
EDGE™ MAV Control System - P09122 - Final Design Review Erik Bellandi – Project Manager Ben Wager – Lead Engineer Garrett Argenna – Mechanical Engineering.

EDGE™ MAV Control System - P Final Design Review Erik Bellandi – Project Manager Ben Wager – Lead Engineer Garrett Argenna – Mechanical Engineering.
Team MASTers™ Craig Lalumiere David Cobler Michael White.

Team MASTers™ Craig Lalumiere David Cobler Michael White.
11/25/02 Auto Tuner Brian Crosby. 11/25/02 Background Manual tuning a string instrument to reference tones take skill and is often a time consuming and.

11/25/02 Auto Tuner Brian Crosby. 11/25/02 Background Manual tuning a string instrument to reference tones take skill and is often a time consuming and.
Guitar Neck Duplicator By Eric Hall. Background  Difficult to Replicate  Time Consuming  Generally done by hand.

Guitar Neck Duplicator By Eric Hall. Background  Difficult to Replicate  Time Consuming  Generally done by hand.
Team Paragon Team Concept and Key Issues Presented by: Andy Pfister Brian Masse.

Team Paragon Team Concept and Key Issues Presented by: Andy Pfister Brian Masse.
P09204 Robotic Platform (RP1)‏ Project Overview Robotic Platform for 1kg Loads (2 nd Generation)‏ One or More scalable Motor Modules Controller System.

P09204 Robotic Platform (RP1)‏ Project Overview Robotic Platform for 1kg Loads (2 nd Generation)‏ One or More scalable Motor Modules Controller System.
Measuring 3 rd Euler Angle 1 st : Rotate around Z Axis by Phi 2 nd : Rotate around Y' Axis by Theta. 3 rd : Measure angle from X' axis to the Decay Particle.

Measuring 3 rd Euler Angle 1 st : Rotate around Z Axis by Phi 2 nd : Rotate around Y' Axis by Theta. 3 rd : Measure angle from X' axis to the Decay Particle.

Similar presentations

Ads by Google