1. 111/3/2004 GLAST LAT ProjectLAT Engineering Meeting LAT Face to Face Manager’ Meeting Nov. 3, 2004 LAT Level Design Status LAT Face to Face Manager’ Meeting Nov. 3, 2004 LAT Level Design Status Rob Blackrpblack@slac.stanford.edu

2. 211/3/2004 GLAST LAT ProjectLAT Engineering Meeting Agenda Agenda –Last Month's Accomplishments –Drawing Release Plan –Issues and Concerns

3. 311/3/2004 GLAST LAT ProjectLAT Engineering Meeting Last Months Accomplishments Support of Mechanical Systems –Released LAT-DS-01580, Grid Box Base Assembly –Continued detail design efforts on MLI –Continued documentation maintenance Support of DAQ –Released Cable Way detail parts –Continued documentation maintenance –Instrumentation Defined thermistor and accelerometer quantities and locations. –Need to review with appropriate subsystems and update all documentation Established basic harness definitions, connector locations, pin outs etc. Top Assembly Documentation –CAL-TEM Assembly Drawing submitted for release –Reviewing Tower installation drawing with Design Integration and I & T.

4. 411/3/2004 GLAST LAT ProjectLAT Engineering Meeting Drawing Release Plan Document DescriptionIssues Release ECD Need Date LAT-DS-01624LAT Assembly DrawingMLI design must be completed4/30/2005 LAT-DS-02561LAT Tower & Elect Assembly DrawingInstrumentation routings defined12/3/200411/1/2004 LAT-DS-02560LAT Tower assembly drawing Finalizing instrumentation routing, TEM clocking, tracker cable bonding11/12/200410/1/2004 LAT-DS-02559CAL-TEM-PS Assembly drawing In review cycle with changes based on NRL review11/10/200410/1/2004 Document Description Pending Rev. Issues Drafting ECD LAT-DS-00309ACD-LAT INTERFACE, IDD04Updates complete, waiting for comments Submitted for review 9/22 LAT-DS-00233CAL-LAT INTERFACE, IDD07Received comments from NRL 10/28 To Doc Control 11/3 LAT-DS-00040LAT INSTRUMENT STAY CLEAR12 Update ACD envelope, Flexure clearance, MLI Interface Waiting for inputs from Spectrum? LAT-DS-00851TRACKER-LAT INTERFACE, IDD2 Received comments from I & T 10/28, need to resolve Submitted 9/2 Top Level Drawings Interface Drawings

5. 511/3/2004 GLAST LAT ProjectLAT Engineering Meeting Issues & Concerns Timely and Appropriate review of Documents CAL Interface (CAL-LAT IDD LAT-DS-00233 Rev 07) –4 weeks to receive comments. ACD Interface (ACD-LAT IDD LAT-DS-00309 Rev 04) –Check print sent out for review, 9/22, waiting for feedback MLI Blanket Design –Conceptual design still in review by Spectrum –The only feed back received since 9/7/04 is a request for additional drawing views on 10/28 –Note the additional work to provide views was not planned until conceptual design approval was given. Instrumentation –Detail design of cabling over 50% complete, cooperation between subsystems is required –Issues still open from last month Instrumentation Termination Bracket design definition Specific locations and mounting methods have been defined, need to be reviewed Still need detail harness definition for accelerometers