1. June 2, 2003ICCS 20031 Performance Instrumentation and Measurement for Terascale Systems Jack Dongarra, Shirley Moore, Philip Mucci University of Tennessee Sameer Shende, and Allen Malony University of Oregon

2. June 2, 2003ICCS 20032 Requirements for Terascale Systems Performance framework must support a wide range of –Performance problems (e.g., single-node performance, synchronization and communication overhead, load balancing) –Performance evaluation methods (e.g., parameter-based modeling, bottleneck detection and diagnosis) –Programming environments (e.g., multiprocess and /or multithreaded, parallel and distributed, large-scale) Need for flexible and extensible performance observation framework

3. June 2, 2003ICCS 20033 Research Problems Appropriate level and location for implementing instrumentation and measurement How to make the framework modular and extensible Appropriate compromise between level of detail/accuracy and instrumentation cost

4. June 2, 2003ICCS 20034 Instrumentation Strategies Source code instrumentation –Manual or using preprocessor Library level instrumentation –e.g., MPI and OpenMP profiling interfaces Binary rewriting –E.g., Pixie, ATOM, EEL, PAT Dynamic instrumentation –DyninstAPI

5. June 2, 2003ICCS 20035 Types of Measurements Profiling Tracing Real-time Analysis

6. June 2, 2003ICCS 20036 Profiling Recording of summary information during execution –inclusive, exclusive time, # calls, hardware statistics, … Reflects performance behavior of program entities –functions, loops, basic blocks –user-defined “semantic” entities Very good for low-cost performance assessment Helps to expose performance bottlenecks and hotspots Implemented through –sampling: periodic OS interrupts or hardware counter traps –instrumentation: direct insertion of measurement code

7. June 2, 2003ICCS 20037 Tracing –Recording of information about significant points (events) during program execution entering/exiting code region (function, loop, block, …) thread/process interactions (e.g., send/receive message) –Save information in event record timestamp CPU identifier, thread identifier Event type and event-specific information – Event trace is a time-sequenced stream of event records – Can be used to reconstruct dynamic program behavior –Typically requires code instrumentation

8. June 2, 2003ICCS 20038 Real-time Analysis Allows evaluation of program performance during execution Examples –Paradyn –Autopilot –Perfometer

9. June 2, 2003ICCS 20039 TAU Performance System Architecture EPILOG Paraver

10. June 2, 2003ICCS 200310 TAU Instrumentation Manually using TAU instrumentation API Automatically using –Program Database Toolkit (PDT) –MPI profiling library –Opari OpenMP rewriting tool Uses PAPI to access hardware counter data

11. June 2, 2003ICCS 200311 Program Database Toolkit (PDT) Program code analysis framework for developing source-based tools High-level interface to source code information Integrated toolkit for source code parsing, database creation, and database query –commercial grade front end parsers –portable IL analyzer, database format, and access API –open software approach for tool development Targets and integrates multiple source languages Used in TAU to build automated performance instrumentation tools

12. June 2, 2003ICCS 200312 PDT Components Language front end –Edison Design Group (EDG): C, C++ –Mutek Solutions Ltd.: F77, F90 –creates an intermediate-language (IL) tree IL Analyzer –processes the intermediate language (IL) tree –creates “program database” (PDB) formatted file DUCTAPE (Bernd Mohr, ZAM, Germany) –C++ program Database Utilities and Conversion Tools APplication Environment –processes and merges PDB files –C++ library to access the PDB for PDT applications

13. June 2, 2003ICCS 200313 TAU Analysis Profile analysis –pprof parallel profiler with text-based display –Racy / jRacy graphical interface to pprof (Tcl/Tk) jRacy is a Java implementation of Racy –ParaProf Next-generation parallel profile analysis and display Trace analysis and visualization –Trace merging and clock adjustment (if necessary) –Trace format conversion (ALOG, SDDF, Vampir) –Vampir (Pallas) trace visualization –Paraver (CEPBA) trace visualization

14. June 2, 2003ICCS 200314 TAU Pprof Display

15. June 2, 2003ICCS 200315 jracy (NAS Parallel Benchmark – LU) n: node c: context t: thread Global profiles Individual profile Routine profile across all nodes

16. June 2, 2003ICCS 200316 ParaProf Scalable Profiler Re-implementation of jRacy tool Target flexibility in profile input source –Profile files, performance database, online Target scalability in profile size and display –Will include three-dimensional display support Provide more robust analysis and extension –Derived performance statistics

17. June 2, 2003ICCS 200317 ParaProf Architecture

18. June 2, 2003ICCS 200318 512-Processor Profile (SAMRAI)

19. June 2, 2003ICCS 200319 Three-dimensional Profile Displays 500-processor Uintah execution (University of Utah)

20. June 2, 2003ICCS 200320 Overview of PAPI Performance Application Programming Interface The purpose of the PAPI project is to design, standardize and implement a portable and efficient API to access the hardware performance monitor counters found on most modern microprocessors. Parallel Tools Consortium project References implementations for all major HPC platforms Installed and in use at major government labs, academic sites Becoming de facto industry standard Incorporated into many performance analysis tools – e.g., HPCView,SvPablo, TAU, Vampir, Vprof

21. June 2, 2003ICCS 200321 PAPI Counter Interfaces PAPI provides three interfaces to the underlying counter hardware: 1.The low level interface provides functions for setting options, accessing native events, callback on counter overflow, etc. 2.The high level interface simply provides the ability to start, stop and read the counters for a specified list of events. 3.Graphical tools to visualize information.

22. June 2, 2003ICCS 200322 PAPI Implementation Tools PAPI Low Level PAPI High Level Hardware Performance Counter Operating System Kernel Extension PAPI Machine Dependent Substrate Machine Specific Layer Portable Layer

23. June 2, 2003ICCS 200323 PAPI Preset Events Proposed standard set of events deemed most relevant for application performance tuning Defined in papiStdEventDefs.h Mapped to native events on a given platform –Run tests/avail to see list of PAPI preset events available on a platform

24. June 2, 2003ICCS 200324 Scalability of PAPI Instrumentation Overhead of library calls to read counters can be excessive. Statistical sampling can reduce overhead. PAPI substrate for Alpha Tru64 UNIX –Built on top of DADD/DCPI (Dynamic Access to DCPI Data/Digital Continuous Profiling Interface) –Sampling approach supported in hardware –1-2% overhead compared to 30% on other platforms Using sampling and hardware profiling support on Itanium/Itanium2

25. June 2, 2003ICCS 200325 Vampir v3.x: Hardware Counter Data Counter Timeline Display

26. June 2, 2003ICCS 200326 What is DynaProf? A portable tool to instrument a running executable with Probes that monitor application performance. Simple command line interface. Open Source Software A work in progress…

27. June 2, 2003ICCS 200327 DynaProf Methodology Make collection of run-time performance data easy by: –Avoiding instrumentation and recompilation –Using the same tool with different probes –Providing useful and meaningful probe data –Providing different kinds of probes –Allowing custom probes

28. June 2, 2003ICCS 200328 Why the “Dyna”? Instrumentation is selectively inserted directly into the program’s address space. Why is this a better way? –No perturbation of compiler optimizations –Complete language independence –Multiple Insert/Remove instrumentation cycles

29. June 2, 2003ICCS 200329 DynaProf Design GUI, command line & script driven user interface Uses GNU readline for command line editing and command completion. Instrumentation is done using: –Dyninst on Linux, Solaris and IRIX –DPCL on AIX

30. June 2, 2003ICCS 200330 DynaProf Commands load list [module pattern] use [probe args] instr module [probe args] instr function [probe args] stop continue run [args] Info unload

31. June 2, 2003ICCS 200331 DynaProf Probe Design Probes provided with distribution –Wallclock probe –PAPI probe –Perfometer probe Can be written in any compiled language Probes export 3 functions with a standardized interface. Easy to roll your own (<1day) Supports separate probes for MPI/OpenMP/Pthreads

32. June 2, 2003ICCS 200332 Future development GUI development Additional probes –Perfex probe –Vprof probe –TAU probe Better support for parallel applications

33. June 2, 2003ICCS 200333 Perfometer Application is instrumented with PAPI –call perfometer() –call mark_perfometer(int color, char *label) Application is started. At the call to perfometer, signal handler and a timer are set up to collect and send the information to a Java applet containing the graphical view. Sections of code that are of interest can be designated with specific colors Real-time display or trace file

34. June 2, 2003ICCS 200334 Perfometer Display Machine info Process & Real time Flop/s Rate Flop/s Min/Max

35. June 2, 2003ICCS 200335 Perfometer Parallel Interface

36. June 2, 2003ICCS 200336 Conclusions TAU and PAPI projects are addressing important research problems involved in constructing a flexible and extensible performance observation framework. Widespread adoption of PAPI demonstrates the value of a portable interface to low-level architecture-specific performance monitoring hardware. TAU framework provides flexible mechanisms for instrumentation and measurement.

37. June 2, 2003ICCS 200337 Conclusions (cont.) Terascale systems require scalable low-overhead means of collecting performance data. –Statistical sampling support in PAPI –TAU filtering and feedback schemes for focusing instrumentation –Real-time monitoring capabilities (Dynaprof, Perfometer) PAPI and TAU infrastructure is designed for interoperability, flexibility, and extensibility.

38. June 2, 2003ICCS 200338 More Information TAU (http://www.acl.lanl.gov/tau) PDT (http://www.acl.lanl.gov/pdtoolkit) PAPI (http://icl.cs.utk.edu/papi/) OPARI (http://www.fz-juelich.de/zam