Presentation is loading. Please wait.

Presentation is loading. Please wait.

Cryostat Assembly 17 September 2008 Martin Nordby, Rafe Schindler, Gary Guiffre, Rick Van Berg.

Published by Modified over 9 years ago

Similar presentations

Presentation on theme: "Cryostat Assembly 17 September 2008 Martin Nordby, Rafe Schindler, Gary Guiffre, Rick Van Berg."— Presentation transcript:

1 Cryostat Assembly 17 September 2008 Martin Nordby, Rafe Schindler, Gary Guiffre, Rick Van Berg

2 LSST Camera Systems Integration 2 Contents General Cryostat section views Raft Tower load transfer process Integration fixturing Back end cable routing Front end vacuum barrier

3 Cryostat Section Views

4 LSST Camera Systems Integration 4 Cryostat 2/3 Section Isometric View

5 LSST Camera Systems Integration 5 Cryostat ¾ Section Isometric View

6 LSST Camera Systems Integration 6 Cryostat XZ-Plane Section

7 LSST Camera Systems Integration 7 Cryostat YZ-Plane Section

8 LSST Camera Systems Integration 8 Cryostat and Valve Box YZ-Plane Section

9 Raft Tower Load Transfer

10 LSST Camera Systems Integration 10 Raft Tower on Cryo Plate

11 LSST Camera Systems Integration 11 Raft Tower Side Views

12 LSST Camera Systems Integration 12 Raft Hold-Down Device Details: -X Side

13 LSST Camera Systems Integration 13 Raft Hold-Down Device Details: +X Side

14 LSST Camera Systems Integration 14 Raft Tower Hold-Down in a Grid Bay

15 Cryostat Integration and Fixturing

16 LSST Camera Systems Integration 16 Cryostat Assembly and Integration Flow From LSST-2119-D, “Camera Integration and Test Flow Chart”

17 LSST Camera Systems Integration 17 Cryostat Integration Facility—Plan View From LSST-6176-A, “SLAC Bldg 33 Camera I&T Facility Layout” Metrology systemAssembly standIntegration gantryCart

18 LSST Camera Systems Integration 18 Cryostat Integration Facility—Elevation View From LSST-6176-A, “SLAC Bldg 33 Camera I&T Facility Layout” Metrology systemAssembly standIntegration gantryCart Cryostat with valve box in cold-test configuration

19 LSST Camera Systems Integration 19 Cryostat Integration Fixture

20 LSST Camera Systems Integration 20 Cryostat Cart Cryostat pivots around mounting points during rotation 3-point mount

21 Back End Cable Routing

22 LSST Camera Systems Integration 22 Back End Cable Routing

23 LSST Camera Systems Integration 23 Feedthrough Flange and Cable Routing from RCC

24 LSST Camera Systems Integration 24 Back End Section Views

25 Front End Vacuum Barrier

26 LSST Camera Systems Integration 26 Cryostat Vacuum

Download ppt "Cryostat Assembly 17 September 2008 Martin Nordby, Rafe Schindler, Gary Guiffre, Rick Van Berg."

Similar presentations

Module Assembly Update Ohio State University and Princeton University are presently preparing facilities for module assembly. Both universities are fabricating.

Module Assembly Update Ohio State University and Princeton University are presently preparing facilities for module assembly. Both universities are fabricating.
19th – 20th of September 2007Cryogenic Expert Meeting at GSI, Jan Patrick Meier1/11 Cryogenic Experts Meeting at GSI, 2007 The SIS 100 Cryogenic Jumper.

19th – 20th of September 2007Cryogenic Expert Meeting at GSI, Jan Patrick Meier1/11 Cryogenic Experts Meeting at GSI, 2007 The SIS 100 Cryogenic Jumper.
(1) - Camera Electronics - Status and Update on changes since Aug 06 18 July 07 John Oliver and the Camera Electronics team.

(1) - Camera Electronics - Status and Update on changes since Aug July 07 John Oliver and the Camera Electronics team.
Cad Setup of Vacuum Tank on Dennis Eagle Truck Placement of the tank on the truck chassis, Design of Chassis rail and vacuum system layout calculated in.

Cad Setup of Vacuum Tank on Dennis Eagle Truck Placement of the tank on the truck chassis, Design of Chassis rail and vacuum system layout calculated in.
Corner Raft Conceptual Design Corner Raft Conceptual Design Kirk Arndt, Ian Shipsey Purdue University LSST Camera Workshop SLAC Sept. 16-19, 2008.

Corner Raft Conceptual Design Corner Raft Conceptual Design Kirk Arndt, Ian Shipsey Purdue University LSST Camera Workshop SLAC Sept , 2008.
Test Chamber Assembly, 1.5M Long (59.00”) Vacuum Tube, 4.00 OD x 3.50 ID Vacuum Tube, 3.75 OD x 3.51 ID 3.375” CFF, Non-Rotatable Feedthrough, Ceramtec.

Test Chamber Assembly, 1.5M Long (59.00”) Vacuum Tube, 4.00 OD x 3.50 ID Vacuum Tube, 3.75 OD x 3.51 ID 3.375” CFF, Non-Rotatable Feedthrough, Ceramtec.
1/01/2008P.Z. Takacs1 RTM Testing Issues B-27 session discussion PZ Takacs 22 March 2012.

1/01/2008P.Z. Takacs1 RTM Testing Issues B-27 session discussion PZ Takacs 22 March 2012.
Quadrupole magnets Magnet concept details have not been developed, however we plan to piggy back on the designs developed by Joel Schults ( IRE Magnet.

Quadrupole magnets Magnet concept details have not been developed, however we plan to piggy back on the designs developed by Joel Schults ( IRE Magnet.
DOE PROGRAM REVIEW June 20071 Development of the LSST Camera Cryostat at SLAC Engineering and R&D June 5, 2007 Rafe H. Schindler (SLAC)

DOE PROGRAM REVIEW June Development of the LSST Camera Cryostat at SLAC Engineering and R&D June 5, 2007 Rafe H. Schindler (SLAC)
July 28 2004GLAST Project Installation Review LATLAT 1 Tracker Tower Installation Review Peter Amnuaypayoat

July GLAST Project Installation Review LATLAT 1 Tracker Tower Installation Review Peter Amnuaypayoat
GLAST LAT ProjectApril 27, 2006: LAT Pre-Ship Review 1 Presentation 8 of 12 Integration and Test GLAST Large Area Telescope: Pre-Shipment Review Integration.

GLAST LAT ProjectApril 27, 2006: LAT Pre-Ship Review 1 Presentation 8 of 12 Integration and Test GLAST Large Area Telescope: Pre-Shipment Review Integration.
Where to put Towers A and B in the Grid – technical issues 18-Jan-2005 L. Wai (SLAC/Group K) for LAT I&T.

Where to put Towers A and B in the Grid – technical issues 18-Jan-2005 L. Wai (SLAC/Group K) for LAT I&T.
Camera Workshop 16-19 September 2008 K. Fouts, K. Gilmore.

Camera Workshop September 2008 K. Fouts, K. Gilmore.
Review of the mechanical design of the final focusing region of the HIF Point Design T. Brown ARIES Project Meeting January 8, 2003.

Review of the mechanical design of the final focusing region of the HIF Point Design T. Brown ARIES Project Meeting January 8, 2003.
Integration and Test 14 October 2008 Martin Nordby.

Integration and Test 14 October 2008 Martin Nordby.
Camera Electronics Systems September 2008 Rick Van Berg.

Camera Electronics Systems September 2008 Rick Van Berg.
Cryostat Structural, Thermal, and Vacuum Systems 14 October 2008 Martin Nordby, Gary Guiffre, John Ku, John Hodgson.

Cryostat Structural, Thermal, and Vacuum Systems 14 October 2008 Martin Nordby, Gary Guiffre, John Ku, John Hodgson.
SLHC - WP7 Barrel UPDATE on LAYOUT OF SERVICES AT THE BARREL ENDS OPTO PCBS: Sketches describe options after discussion with Tony Weidberg (6.6.2007) Preference.

SLHC - WP7 Barrel UPDATE on LAYOUT OF SERVICES AT THE BARREL ENDS OPTO PCBS: Sketches describe options after discussion with Tony Weidberg ( ) Preference.
1 Cryostat assembly, integration and commissioning procedures M.Olcese Version: 07 May 2008.

1 Cryostat assembly, integration and commissioning procedures M.Olcese Version: 07 May 2008.
Ground Safety Review – Phase II September 8-10, 2008 Phil Mott

Ground Safety Review – Phase II September 8-10, 2008 Phil Mott

Similar presentations

Ads by Google