Presentation is loading. Please wait.

Presentation is loading. Please wait.

Scintillating Fiber and Ribbon Production Update Alan Bross MICE CM 16 October 8, 2006.

Published by Modified over 9 years ago

Similar presentations

Presentation on theme: "Scintillating Fiber and Ribbon Production Update Alan Bross MICE CM 16 October 8, 2006."— Presentation transcript:

1 Scintillating Fiber and Ribbon Production Update Alan Bross MICE CM 16 October 8, 2006

2 Status  Ribbon Mirroring continues. 37 runs have been mirrored u Mean R = 77% RMS=3% (Approx. 375 measurements)

3 Mirroring Status  From Eileen u All fiber prep work is complete s Cutting s Inspection s Polishing u Approximately 37k fibers sputtered (mirrored) (about ½) u The expected rate from now is about 6000/week s Finish 3 rd week of November u A second sputtering system has been put together, but we are waiting for new sputtering gun (est. delivery 10/31) s Could speed things up a bit

4 New Ribbons  We anticipate starting full production the week of October 17th. u Performing prep work this week u Hope to reach production goal of 1 ribbon/day during this next fabrication period

Download ppt "Scintillating Fiber and Ribbon Production Update Alan Bross MICE CM 16 October 8, 2006."

Similar presentations

MICE Collaboration MTG IIT – Feb 2002 The Fiber Tracker Option for MICE Spectrometers The D0 Central Fiber Tracker – Experience and Implications for MICE.

MICE Collaboration MTG IIT – Feb 2002 The Fiber Tracker Option for MICE Spectrometers The D0 Central Fiber Tracker – Experience and Implications for MICE.
Bulk Scintillator Light Yield  We have prepared samples of bulk scintillator in order to study optimization for the MICE Fiber Tracker  pT(1.25%) + 3HF(.1-1%)

Bulk Scintillator Light Yield  We have prepared samples of bulk scintillator in order to study optimization for the MICE Fiber Tracker  pT(1.25%) + 3HF(.1-1%)
Plans for 201-MHz Cavities Derun Li Center for Beam Physics Lawrence Berkeley National Laboratory November 18, 2010.

Plans for 201-MHz Cavities Derun Li Center for Beam Physics Lawrence Berkeley National Laboratory November 18, 2010.
I visited the Sage on Sep 23 2010. I hoped to gain a new appreciation for how the Sage runs. I learned that it takes everyone working together and talking.

I visited the Sage on Sep I hoped to gain a new appreciation for how the Sage runs. I learned that it takes everyone working together and talking.
MINER A Director’s CD-3b Review 11 June 2007 Kevin McFarland University of Rochester 1MINERvA WBS 1,2,4: Scintillator and Fiber Fiber Milestones: WLS Fiber.

MINER A Director’s CD-3b Review 11 June 2007 Kevin McFarland University of Rochester 1MINERvA WBS 1,2,4: Scintillator and Fiber Fiber Milestones: WLS Fiber.
Downstream PID Review Alan Bross MICE CM 16 October 8, 2006.

Downstream PID Review Alan Bross MICE CM 16 October 8, 2006.
MICE Tracker workshop, 06Nov. 20061 Waveguides for Station5 H. Sakamoto / M. Yoshida.

MICE Tracker workshop, 06Nov Waveguides for Station5 H. Sakamoto / M. Yoshida.
Beam Position Monitors MICE CM Harbin January, 2009.

Beam Position Monitors MICE CM Harbin January, 2009.
Takashi Matsushita Imperial College T. Matsushita 1 Station 5.

Takashi Matsushita Imperial College T. Matsushita 1 Station 5.
Scintillating Fiber and Ribbon Production Update Alan Bross MICE Tracker Phone Meeting September 8, 2006.

Scintillating Fiber and Ribbon Production Update Alan Bross MICE Tracker Phone Meeting September 8, 2006.
LiH Absorber for MICE Alan Bross May 31, 2009. LiH Absorber in Cooling Channel  LiH absorbers are now the “baseline” for the initial 4D cooling u Replaced.

LiH Absorber for MICE Alan Bross May 31, LiH Absorber in Cooling Channel  LiH absorbers are now the “baseline” for the initial 4D cooling u Replaced.
MICE Video MTG 9/25/2002 MICE Fiber Tracker Design Update Requirements and Proposed Detector Implementations A. Bross Fermilab.

MICE Video MTG 9/25/2002 MICE Fiber Tracker Design Update Requirements and Proposed Detector Implementations A. Bross Fermilab.
1 Start at Estimating Cable Labor Howard Budd University of Rochester Rochester Meeting Nov 14 2008.

1 Start at Estimating Cable Labor Howard Budd University of Rochester Rochester Meeting Nov
6/8/2006 Particle Physics Division Technical Centers 1 Vacuum Deposition Thin Film Coatings Facility at Lab 7 Eileen Hahn.

6/8/2006 Particle Physics Division Technical Centers 1 Vacuum Deposition Thin Film Coatings Facility at Lab 7 Eileen Hahn.
Ionization Profile Monitor Project Current Status of IPM Buffer Board Project 10 February 2006 Rick Kwarciany.

Ionization Profile Monitor Project Current Status of IPM Buffer Board Project 10 February 2006 Rick Kwarciany.
Paul Rubinov TriP-t & AFEII status. AFE and CFT 9 o K VLPC (x512) AFE DISCRADC Discriminator output every 396 nsec for L1 Amplitude signal readout for.

Paul Rubinov TriP-t & AFEII status. AFE and CFT 9 o K VLPC (x512) AFE DISCRADC Discriminator output every 396 nsec for L1 Amplitude signal readout for.
Scintillating Fiber, Ribbon Production, Cryo Update Alan Bross MICE Tracker Meeting IC November 8, 2006.

Scintillating Fiber, Ribbon Production, Cryo Update Alan Bross MICE Tracker Meeting IC November 8, 2006.
Lab5 Production Status: Optics and RBX integration Pawel de Barbaro U. of Rochester.

Lab5 Production Status: Optics and RBX integration Pawel de Barbaro U. of Rochester.
Contactor A contactor is a relay with heavy-duty contacts to carry large amounts of current. Available either Normally Open or Normally Closed.

Contactor A contactor is a relay with heavy-duty contacts to carry large amounts of current. Available either Normally Open or Normally Closed.
Whole School Attendance 2013 - 2014 Whole School Attendance 94.64% Overall School Absence 5.36%

Whole School Attendance Whole School Attendance 94.64% Overall School Absence 5.36%

Similar presentations

Ads by Google