1. Hazardous Materials

2. Chemical Inventory Each area must maintain a complete, accurate and up to date chemical inventory. Each area must maintain a complete, accurate and up to date chemical inventory. The inventory should include: The inventory should include: –All Chemicals  Hazardous  Non-hazardous –Compressed Gasses

3. Chemical Inventory When you are doing the inventory, it is a good time to discard any chemicals that: When you are doing the inventory, it is a good time to discard any chemicals that: –Are expired. –Are no longer being used. –Have containers that have been compromised, i.e. cracked lid. –Have labels that are illegible. Submit your updated inventory to EH&S on the yearly basis. Submit your updated inventory to EH&S on the yearly basis.

4. Material Safety Data Sheets - MSDS A Material Safety Data Sheet or MSDS is information provided by the manufacturer and maintain by the employer to inform employees of the possible hazards associated with chemicals being used in their work area. It is part of a hazard communication program. A Material Safety Data Sheet or MSDS is information provided by the manufacturer and maintain by the employer to inform employees of the possible hazards associated with chemicals being used in their work area. It is part of a hazard communication program.

5. Material Safety Data Sheets - MSDS Each area must maintain a current MSDS for each chemical or compound being stored or used in the workshops or work areas. Each area must maintain a current MSDS for each chemical or compound being stored or used in the workshops or work areas. Each MSDS must be available whenever the chemical is being used. Each MSDS must be available whenever the chemical is being used. Everyone should know how to use and understand MSDS’s and where they are located. Everyone should know how to use and understand MSDS’s and where they are located.

6. Important MSDS Information Chemical Id Chemical Id Synonyms Synonyms Hazardous Ingredients Hazardous Ingredients Exposure Limits Exposure Limits Physical Data Physical Data Appearance and odor Appearance and odor Fire & Explosion Data Fire & Explosion Data Flash-point Flash-point Health Hazards Health Hazards Toxic, Carcinogen, etc. Physical Hazards Physical Hazards Corrosive, Oxidizer, etc. Corrosive, Oxidizer, etc. Reactivity data Reactivity data Incompatibles Spill Procedures Spill Procedures Large and small Special Protection Special Protection Wear appropriate PPE Signs and Symptoms of Exposure Signs and Symptoms of Exposure Headache, Nausea, etc.

7. Important MSDS Information An MSDS is a good source to determine: An MSDS is a good source to determine: –Proper Personal Protective Equipment (PPE). –Labeling requirements. –Storage requirements. READ an MSDS before using a new chemical or unsure of the possible hazards. READ an MSDS before using a new chemical or unsure of the possible hazards.

8. MSDS Emergency In an emergency and you cannot retrieve an MSDS, you can be obtained it by calling the 3E Company’s 24 Hour phone #: In an emergency and you cannot retrieve an MSDS, you can be obtained it by calling the 3E Company’s 24 Hour phone #:800-451-8346Or760-602-8703

9. Chemical Storage Separate incompatible chemicals. Separate incompatible chemicals. –Separate oxidizers (like some Fertilizers) from flammables (Solvents, Paints) –Separate flammable liquids, acids and bases Provide earthquake restraints for all open shelving when storing chemicals. Provide earthquake restraints for all open shelving when storing chemicals. Secondary containment needs to be provide if there is a risk of a release into the environment. Secondary containment needs to be provide if there is a risk of a release into the environment.

10. Chemical Storage The storage container MUST be compatible with material it is holding. The storage container MUST be compatible with material it is holding. –Example: Metal containers cannot be used for acids and bases. Food containers MUST NEVER BE USED! Food containers MUST NEVER BE USED!

11. No earthquake restraints!

12. Flammable Liquids Storage If a area has quantities greater than 10 gallons, they must be stored in an approved flammable liquids storage cabinet. If a area has quantities greater than 10 gallons, they must be stored in an approved flammable liquids storage cabinet. Containers that can be shattered or punctured easily must be in secondary containment. Containers that can be shattered or punctured easily must be in secondary containment. Do not store flammables with acids or bases. Do not store flammables with acids or bases.

13. Acids Storage Store in secondary containment Store in secondary containment Label cabinets “Acid” with 3” letters Label cabinets “Acid” with 3” letters Store acids of different classes in separate secondary containment Store acids of different classes in separate secondary containment –Organic (Acetic Acid) –Inorganic (Muriatic Acid) –Oxidizing (Nitric Acid)

14. Bases Storage Store in secondary containment Store in secondary containment Store away from acids and solvents Store away from acids and solvents Label cabinets “Base” with 3” letters Label cabinets “Base” with 3” letters Examples Examples –Hydroxides (Lime, Caustic Soda) –Ammonia –Bleach

15. Compressed Gasses Storage Must be upright and restrained Must be upright and restrained –At least two chains Separate incompatible gasses Separate incompatible gasses –Flammable & Oxidizing by 20 feet Keep caps on while in transportation or in storage Keep caps on while in transportation or in storage

16. Chemical Labeling All containers in the work area must be properly labeled with the name of the material being stored in the container. This includes non-hazardous materials such as: All containers in the work area must be properly labeled with the name of the material being stored in the container. This includes non-hazardous materials such as: –Water –Detergent –Window Cleaner Full name with “no” abbreviations. Full name with “no” abbreviations.

17. Containers of hazardous materials must not only include the name of the material but also the physical and health hazards associated with the use of the material. Containers of hazardous materials must not only include the name of the material but also the physical and health hazards associated with the use of the material. Chemical Labeling

18. Consult the MSDS or the manufacturer’s label for accurate labeling information regarding physical and health hazards. Consult the MSDS or the manufacturer’s label for accurate labeling information regarding physical and health hazards.

19. HMIS “Hazardous Materials Identification System” The HMIS rating is a color-coded, alphanumeric system which gives information about the health, flammability and reactivity of the chemical in question. The system rates a material from a minimal hazard through a serious hazard. It also recommends the appropriate personal protective equipment to be worn when handling the particular chemical.

20. Example of HMIS

21. HMIS Health 0 - Minimal Hazard 0 - Minimal Hazard Not significant risk to health. Not significant risk to health. 1 - Slight Hazard 1 - Slight Hazard Irritation or minor reversible injury possible. Irritation or minor reversible injury possible. 2 - Moderate Hazard 2 - Moderate Hazard Temporary or minor injury may occur. Temporary or minor injury may occur. 3 - Serious Hazard 3 - Serious Hazard Major injury likely unless prompt action is taken and medical treatment is given. Major injury likely unless prompt action is taken and medical treatment is given. 4 - Severe Hazard 4 - Severe Hazard Life-threatening, major or permanent damage may result from single or repeated over exposures. Life-threatening, major or permanent damage may result from single or repeated over exposures.

22. HMIS Flammability 0 - Minimal Hazard 0 - Minimal Hazard Materials that will not burn. Usually includes any material that will not burn in air when exposed to a temperature of 1500°F. for a period of 5 minutes Materials that will not burn. Usually includes any material that will not burn in air when exposed to a temperature of 1500°F. for a period of 5 minutes 1 - Slight Hazard 1 - Slight Hazard Materials that must be preheated before ignition can occur. Materials that must be preheated before ignition can occur. 2 - Moderate Hazard 2 - Moderate Hazard Materials that must be moderately heated or exposed to relatively high ambient temperatures before ignition can occur. Materials that must be moderately heated or exposed to relatively high ambient temperatures before ignition can occur. 3 - Serious Hazard 3 - Serious Hazard Materials capable of ignition under almost all ambient temperature conditions. Materials capable of ignition under almost all ambient temperature conditions. 4 - Severe Hazard 4 - Severe Hazard Materials that will rapidly or completely vaporize at atmospheric pressure and normal ambient temperatures with a flashpoint below 73°F. Materials may ignite spontaneously with air. Materials that will rapidly or completely vaporize at atmospheric pressure and normal ambient temperatures with a flashpoint below 73°F. Materials may ignite spontaneously with air.

23. HMIS Reactivity 0 - Minimal Hazard 0 - Minimal Hazard Materials that are normally stable even under fire conditions. Materials that are normally stable even under fire conditions. 1 - Slight Hazard 1 - Slight Hazard Materials that are normally stable but that can become unstable at elevated temperatures and pressures. Materials that are normally stable but that can become unstable at elevated temperatures and pressures. 2 - Moderate Hazard 2 - Moderate Hazard Materials that readily undergo violent chemical change at elevated temperatures and pressures. These materials may also react violently with water. Materials that readily undergo violent chemical change at elevated temperatures and pressures. These materials may also react violently with water. 3 - Serious Hazard 3 - Serious Hazard Materials that are capable of detonation or explosive decomposition but require a strong initiating source or materials the react explosively with water. Materials that are capable of detonation or explosive decomposition but require a strong initiating source or materials the react explosively with water. 4 - Severe Hazard 4 - Severe Hazard Materials that are readily capable of detonation or explosive decomposition or explosive reaction at normal temperatures and pressures. Materials that are readily capable of detonation or explosive decomposition or explosive reaction at normal temperatures and pressures.

24. HMIS Protective Equipment

25. San Diego State University 5500 Campanile Drive San Diego, CA 92182 Other Type of Hazmat Labeling- Sample 3 0 1 x x x x x Ethanol

26. Be Safe, Act Responsibly, Accidents Really Do Happen

27. Frequently Asked Questions Q. How do I know what is the appropriate Personal Protective Equipment (PPE) that I should use? Q. How do I know what is the appropriate Personal Protective Equipment (PPE) that I should use? A. Check the MSDS or sometimes the manufacture’s label will have the information. MSDS’s are a great tool in deciding how to label your containers, too. A. Check the MSDS or sometimes the manufacture’s label will have the information. MSDS’s are a great tool in deciding how to label your containers, too.

28. Frequently Asked Questions Q. Do I need to use the blue, red, yellow and white HMIS labels? Q. Do I need to use the blue, red, yellow and white HMIS labels? No, it would be ideal if everyone did but sometimes it is not practical. You can use whatever method you can. Be it masking tape or sharpies. As long as all the information is there, it is legible and stays on the container, you are fine. No, it would be ideal if everyone did but sometimes it is not practical. You can use whatever method you can. Be it masking tape or sharpies. As long as all the information is there, it is legible and stays on the container, you are fine.

29. Frequently Asked Questions Q. Why do I need to label something has just plain water in it? Q. Why do I need to label something has just plain water in it? A. A container with water looks just like a container with Hydrochloric Acid or any other clear liquid. You can’t tell if something is dangerous just by looking at it. That is the purpose of Hazard Communication. Communicate what is hazardous and what is not. A. A container with water looks just like a container with Hydrochloric Acid or any other clear liquid. You can’t tell if something is dangerous just by looking at it. That is the purpose of Hazard Communication. Communicate what is hazardous and what is not.

30. The End