Presentation is loading. Please wait.

Presentation is loading. Please wait.

Transition Plan for Removing Wind Phase 1 Generic Models

Similar presentations


Presentation on theme: "Transition Plan for Removing Wind Phase 1 Generic Models"— Presentation transcript:

1 Transition Plan for Removing Wind Phase 1 Generic Models
WECC SRWG Meeting July 2014 Eric Bakie

2 Proposed WECC REMTF Renewable Energy Model Implementation Plan
Key stakeholder input (REMTF, IEEE, IEC) Model specifications approved by MVWG and TSS Prototype model implementation tested Model validation against plant-level field data (difficult and ongoing) Models implemented in release version of commercial software programs Model user guidelines Webinar on WECC/REMTF model development, deployment process Update Approved Dynamic Models List WECC workshop on RE modeling Model validation guidelines and tools (in process) WECC request for data submittal using new models, with grace period

3 Agenda Review Wind and Solar Records in Current WECC MDF
Review MDF Parsing Spreadsheet Tool MDF Review Results Review Proposed Implementation Timeline for Phase 2 REMTF Wind and Solar Models Group Discussion

4 Wind and Solar Dynamic Model Records in WECC MDF
genrou 132 Approved Models Model WECC MDF wt1g 15 wt1t wt1p Model WECC MDF wt2g 26 wt2e 22 wt2t wt2p Model WECC MDF wt3g 87 wt3e 82 wt3t 80 wt3p 74 Model WECC MDF wt4g 79 wt4e 76 wt4t 53 Wind 39 Solar 40 Un-Approved Models Model WECC MDF gewtg 133 exwtge 70 ewtgfc 30 wndtge 54 Wind 50 Solar 44 Model WECC MDF genwri 12 exwtg1 wndtrb 1 Model WECC MDF pv1g 2 pv1e Model WECC MDF motor1 54 Wind 40

5 Est. Total MDF Records for Transition to REMTF Phase 2 Wind / Solar Models
Modeling Package WECC MDF WT1 15 WT2 26 WT3 87 WT4 79 GE WTG 133 GENWRI 12 PV1 2 MOTOR1 40 GENROU (????) 132 Est. TOTAL 526

6 motor1 Model Conversion Progress (12 mo.)
Model Conversion of Type 1 Wind using motor1 from SRWG RepLog Case Rep Log Number of unapproved models (motor1, in WECC Basecase data 14hps1a July 2013 36 14hs4a Nov 2013 31 14ls1a March 2014 15hsp1a July 2014 Conversion to Phase 2 estimate is 526 records

7 MDF Review Observations
Large blocks of units represented using synchronous generator models (i.e. genrou(tpj), exst1, ggov1, etc.) Dynamics Data records do not match Powerflow Turbine Type Turbine Type 21 – Type 1 Wind Turbine MDF Comment = Type 4 Plant Model Records = Type 3 Models Large blocks represented without dynamic control models gewtg or genrou – model only Large blocks represented without full collector system equivalent

8 Implementation Plan Goal
Update existing WECC wind/solar dynamic records with REMTF Phase 2 Wind and Solar Models Typos in Table 1 / 1A: wt1p(2p) => wt1p_b VRGTPA => VTGTPAT FRQTPA => FRQTPAT

9 Notes on wt1p and wt2p REMTF recommended removing wt1p and wt2p models from the WECC Approved Model List No pitch controller for passive stall turbines wt1p_b should be used for active stall turbines REMTF will take action to inspect MDF Make recommendation of either deleting wt1p and wt2p records or replacing records with wt1p_b models

10 2014 SRWG Base Case Compilation Schedule
Data Request to Start Transition

11 2015 SRWG Base Case Compilation Schedule
Phase 2 Target Completion Date Remove Phase 1 Models Add un-converted models to PPMDTF list PPMDTF review target completion date

12 Proposed Implementation Timeline
MVWG Renewables Workshop 6/17/2014 Initial WECC Data Request 7/18/2014 Target Completion Date 6/05/2015 Remove Ph. 1 Models from Approved List 6/05/2015 Begin PPMDTF Review 7/10/2015 Target Completion of PPMDTF Review 12/18/2015

13 Relevant Timeline for NERC Modeling Data Verification Standards
R1, R3, R4, R5, R6 07/1/2014 R2 (30%) 07/1/2018 R2 (50%) 07/1/2020 R2 (100%) 07/1/2024 MOD-027-1 R1, R3, R4, R5 07/1/2014

14 Relevant Timeline for NERC Modeling Data Reporting Standards

15 SRWG Discussion Is the proposed implementation plan reasonable?
SRWG Member Recommendations

16 Next Steps Add SRWG Member Comments
Publish Phase 2 Implementation Plan Post to SRWG Site Develop Tool for Tracking Progress Stand Alone or Replog Encourage data submitters to improve steady-state and dynamic data representation of wind and solar plants in WECC Basecases Encourage use of WECC Wind and Solar Modeling Guidelines Develop Tool for checking Powerflow Turbine Type Data against dynamics data modeling records

17 Resources/References
WECC Wind Plant Dynamic Modeling Guidelines WECC Solar Plant Dynamic Modeling Guidelines Status Update of WECC Models

18 Questions Eric Bakie, P.E. SYSTEM PLANNING ENGINEER
Idaho Power | System Planning  (208)


Download ppt "Transition Plan for Removing Wind Phase 1 Generic Models"

Similar presentations


Ads by Google