1. Rudra Environmental Solution (India) ltd Pune
Pictures with reflection and blurred background
(Basic)
To reproduce the picture effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Images group, click Picture.
In the Insert Picture dialog box, select a picture and then click Insert.
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the arrow below Crop, point to Crop to Shape, and then under Rectangles click Round Diagonal Corner Rectangle.
Also under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Reflection in the right pane, and in the Reflection pane, in the Presets list, click Half Reflection, Touching.
In the Insert Picture dialog box, select a different picture and then click Insert. Repeat this process until there are three pictures on the slide.
Select the second picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the third picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the second picture.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the third picture.
Press and hold CTRL, and then select all three pictures. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align Selected Objects.
Click Align Middle.
To reproduce the background effects on this slide, do the following:
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the width is set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Artistic Effects in the left pane, and in the Artistic Effects pane, do the following:
Click the button next to Presets and then click Blur (second row, fifth option from the left).
In the Radius box, enter 30.
On the Home tab, in the Drawing group, click Shapes, and under Rectangles click Rectangle (first option from the left).
Drag to draw a rectangle on the slide.
Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, enter 7.5” into the Height box and enter 10” into the Width box.
Also under Drawing Tools, on the Format tab, in the Shape Styles group, click Shape Fill, point to Gradients, and then click More Gradients. In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
In the Type list, select Radial.
In the Direction list, select From Center.
Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop from the left in the slider, and then do the following:
In the Position box, enter 0%.
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Transparency box, enter 60%.
Select the second stop from the left in the slider, and then do the following:
In the Position box, enter 100%.
In the Transparency box, enter 0%.
 Also in the Format Shape dialog box, click Line Color in the right pane, and in the Line Color pane select No Line.
Select the shape. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align to slide.
Click Align Center.
On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
Select the background picture. On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
For Green Future

2. Village /City/State/Country/World
ABOUT US
We as citizens felt it was our civic duty to find the
solution for growing problem of plastic waste in
Village /City/State/Country/World
and for that reason we have decided to work on a
process of disintegration of plastic and leave the
World a better place for future generation
Pictures with reflection and blurred background
(Basic)
To reproduce the picture effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Images group, click Picture.
In the Insert Picture dialog box, select a picture and then click Insert.
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the arrow below Crop, point to Crop to Shape, and then under Rectangles click Round Diagonal Corner Rectangle.
Also under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Reflection in the right pane, and in the Reflection pane, in the Presets list, click Half Reflection, Touching.
In the Insert Picture dialog box, select a different picture and then click Insert. Repeat this process until there are three pictures on the slide.
Select the second picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the third picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the second picture.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the third picture.
Press and hold CTRL, and then select all three pictures. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align Selected Objects.
Click Align Middle.
To reproduce the background effects on this slide, do the following:
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the width is set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Artistic Effects in the left pane, and in the Artistic Effects pane, do the following:
Click the button next to Presets and then click Blur (second row, fifth option from the left).
In the Radius box, enter 30.
On the Home tab, in the Drawing group, click Shapes, and under Rectangles click Rectangle (first option from the left).
Drag to draw a rectangle on the slide.
Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, enter 7.5” into the Height box and enter 10” into the Width box.
Also under Drawing Tools, on the Format tab, in the Shape Styles group, click Shape Fill, point to Gradients, and then click More Gradients. In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
In the Type list, select Radial.
In the Direction list, select From Center.
Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop from the left in the slider, and then do the following:
In the Position box, enter 0%.
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Transparency box, enter 60%.
Select the second stop from the left in the slider, and then do the following:
In the Position box, enter 100%.
In the Transparency box, enter 0%.
 Also in the Format Shape dialog box, click Line Color in the right pane, and in the Line Color pane select No Line.
Select the shape. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align to slide.
Click Align Center.
On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
Select the background picture. On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
For Green Future

3. ABOUT US Currently, we are working on Dry as well as wet
Waste management , organic fertilizers, soil
enricher & non-conventional energy sources are
the areas where R & D work is in progress.
Thus we, have been successful in getting rid of
non-degradable polymer waste by Gasolysis
process and generating poly fuel from the
plastic waste.
Pictures with reflection and blurred background
(Basic)
To reproduce the picture effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Images group, click Picture.
In the Insert Picture dialog box, select a picture and then click Insert.
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the arrow below Crop, point to Crop to Shape, and then under Rectangles click Round Diagonal Corner Rectangle.
Also under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Reflection in the right pane, and in the Reflection pane, in the Presets list, click Half Reflection, Touching.
In the Insert Picture dialog box, select a different picture and then click Insert. Repeat this process until there are three pictures on the slide.
Select the second picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the third picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the second picture.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the third picture.
Press and hold CTRL, and then select all three pictures. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align Selected Objects.
Click Align Middle.
To reproduce the background effects on this slide, do the following:
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the width is set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Artistic Effects in the left pane, and in the Artistic Effects pane, do the following:
Click the button next to Presets and then click Blur (second row, fifth option from the left).
In the Radius box, enter 30.
On the Home tab, in the Drawing group, click Shapes, and under Rectangles click Rectangle (first option from the left).
Drag to draw a rectangle on the slide.
Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, enter 7.5” into the Height box and enter 10” into the Width box.
Also under Drawing Tools, on the Format tab, in the Shape Styles group, click Shape Fill, point to Gradients, and then click More Gradients. In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
In the Type list, select Radial.
In the Direction list, select From Center.
Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop from the left in the slider, and then do the following:
In the Position box, enter 0%.
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Transparency box, enter 60%.
Select the second stop from the left in the slider, and then do the following:
In the Position box, enter 100%.
In the Transparency box, enter 0%.
 Also in the Format Shape dialog box, click Line Color in the right pane, and in the Line Color pane select No Line.
Select the shape. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align to slide.
Click Align Center.
On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
Select the background picture. On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
For Green Future

4. PLASTIC BACKGROUND Plastic being an inevitable part of our day to day
life which plays very important role in domestic
& industrial utility.
It has wide range of applications due to its unique
properties. Although plastic got its various
advantages it has got some disadvantages too.
Pictures with reflection and blurred background
(Basic)
To reproduce the picture effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Images group, click Picture.
In the Insert Picture dialog box, select a picture and then click Insert.
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the arrow below Crop, point to Crop to Shape, and then under Rectangles click Round Diagonal Corner Rectangle.
Also under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Reflection in the right pane, and in the Reflection pane, in the Presets list, click Half Reflection, Touching.
In the Insert Picture dialog box, select a different picture and then click Insert. Repeat this process until there are three pictures on the slide.
Select the second picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the third picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the second picture.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the third picture.
Press and hold CTRL, and then select all three pictures. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align Selected Objects.
Click Align Middle.
To reproduce the background effects on this slide, do the following:
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the width is set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Artistic Effects in the left pane, and in the Artistic Effects pane, do the following:
Click the button next to Presets and then click Blur (second row, fifth option from the left).
In the Radius box, enter 30.
On the Home tab, in the Drawing group, click Shapes, and under Rectangles click Rectangle (first option from the left).
Drag to draw a rectangle on the slide.
Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, enter 7.5” into the Height box and enter 10” into the Width box.
Also under Drawing Tools, on the Format tab, in the Shape Styles group, click Shape Fill, point to Gradients, and then click More Gradients. In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
In the Type list, select Radial.
In the Direction list, select From Center.
Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop from the left in the slider, and then do the following:
In the Position box, enter 0%.
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Transparency box, enter 60%.
Select the second stop from the left in the slider, and then do the following:
In the Position box, enter 100%.
In the Transparency box, enter 0%.
 Also in the Format Shape dialog box, click Line Color in the right pane, and in the Line Color pane select No Line.
Select the shape. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align to slide.
Click Align Center.
On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
Select the background picture. On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
For Green Future

5. PLASTIC BACKGROUND Basically plastic is a Non Degradable and non
perishable.
Annually, between 15 and 30 billion plastic bags are discarded directly into the world’s waters and environments.
They break into smaller pieces and more toxic polymers that spread across soils, waters, and bottoms and find their way into aquatic food chains.
Pictures with reflection and blurred background
(Basic)
To reproduce the picture effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Images group, click Picture.
In the Insert Picture dialog box, select a picture and then click Insert.
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the arrow below Crop, point to Crop to Shape, and then under Rectangles click Round Diagonal Corner Rectangle.
Also under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Reflection in the right pane, and in the Reflection pane, in the Presets list, click Half Reflection, Touching.
In the Insert Picture dialog box, select a different picture and then click Insert. Repeat this process until there are three pictures on the slide.
Select the second picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the third picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the second picture.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the third picture.
Press and hold CTRL, and then select all three pictures. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align Selected Objects.
Click Align Middle.
To reproduce the background effects on this slide, do the following:
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the width is set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Artistic Effects in the left pane, and in the Artistic Effects pane, do the following:
Click the button next to Presets and then click Blur (second row, fifth option from the left).
In the Radius box, enter 30.
On the Home tab, in the Drawing group, click Shapes, and under Rectangles click Rectangle (first option from the left).
Drag to draw a rectangle on the slide.
Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, enter 7.5” into the Height box and enter 10” into the Width box.
Also under Drawing Tools, on the Format tab, in the Shape Styles group, click Shape Fill, point to Gradients, and then click More Gradients. In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
In the Type list, select Radial.
In the Direction list, select From Center.
Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop from the left in the slider, and then do the following:
In the Position box, enter 0%.
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Transparency box, enter 60%.
Select the second stop from the left in the slider, and then do the following:
In the Position box, enter 100%.
In the Transparency box, enter 0%.
 Also in the Format Shape dialog box, click Line Color in the right pane, and in the Line Color pane select No Line.
Select the shape. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align to slide.
Click Align Center.
On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
Select the background picture. On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
For Green Future

6. FACTORS AFFECTING ENVIRONMENT
Manufacturing of plastic products consumers
significant quantities of resources. (4% of worlds
annual oil production as feed stock + 3% to 4% in
manufacturing).
Littered plastics spoils beauty of the city, choke
drains and make important public places filthy.
Risk on human health and environment due to use
of toxic chemicals in plastic products.
Animals do feed on it from the garbage bins, leading
to illness and possible death of the animals.
Pictures with reflection and blurred background
(Basic)
To reproduce the picture effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Images group, click Picture.
In the Insert Picture dialog box, select a picture and then click Insert.
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the arrow below Crop, point to Crop to Shape, and then under Rectangles click Round Diagonal Corner Rectangle.
Also under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Reflection in the right pane, and in the Reflection pane, in the Presets list, click Half Reflection, Touching.
In the Insert Picture dialog box, select a different picture and then click Insert. Repeat this process until there are three pictures on the slide.
Select the second picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the third picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the second picture.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the third picture.
Press and hold CTRL, and then select all three pictures. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align Selected Objects.
Click Align Middle.
To reproduce the background effects on this slide, do the following:
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the width is set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Artistic Effects in the left pane, and in the Artistic Effects pane, do the following:
Click the button next to Presets and then click Blur (second row, fifth option from the left).
In the Radius box, enter 30.
On the Home tab, in the Drawing group, click Shapes, and under Rectangles click Rectangle (first option from the left).
Drag to draw a rectangle on the slide.
Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, enter 7.5” into the Height box and enter 10” into the Width box.
Also under Drawing Tools, on the Format tab, in the Shape Styles group, click Shape Fill, point to Gradients, and then click More Gradients. In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
In the Type list, select Radial.
In the Direction list, select From Center.
Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop from the left in the slider, and then do the following:
In the Position box, enter 0%.
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Transparency box, enter 60%.
Select the second stop from the left in the slider, and then do the following:
In the Position box, enter 100%.
In the Transparency box, enter 0%.
 Also in the Format Shape dialog box, click Line Color in the right pane, and in the Line Color pane select No Line.
Select the shape. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align to slide.
Click Align Center.
On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
Select the background picture. On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
For Green Future

7. Birds, fish, animals, die by eating plastic.
REALITY
Birds, fish, animals, die by eating plastic.
Pictures with reflection and blurred background
(Basic)
To reproduce the picture effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Images group, click Picture.
In the Insert Picture dialog box, select a picture and then click Insert.
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the arrow below Crop, point to Crop to Shape, and then under Rectangles click Round Diagonal Corner Rectangle.
Also under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Reflection in the right pane, and in the Reflection pane, in the Presets list, click Half Reflection, Touching.
In the Insert Picture dialog box, select a different picture and then click Insert. Repeat this process until there are three pictures on the slide.
Select the second picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the third picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the second picture.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the third picture.
Press and hold CTRL, and then select all three pictures. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align Selected Objects.
Click Align Middle.
To reproduce the background effects on this slide, do the following:
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the width is set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Artistic Effects in the left pane, and in the Artistic Effects pane, do the following:
Click the button next to Presets and then click Blur (second row, fifth option from the left).
In the Radius box, enter 30.
On the Home tab, in the Drawing group, click Shapes, and under Rectangles click Rectangle (first option from the left).
Drag to draw a rectangle on the slide.
Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, enter 7.5” into the Height box and enter 10” into the Width box.
Also under Drawing Tools, on the Format tab, in the Shape Styles group, click Shape Fill, point to Gradients, and then click More Gradients. In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
In the Type list, select Radial.
In the Direction list, select From Center.
Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop from the left in the slider, and then do the following:
In the Position box, enter 0%.
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Transparency box, enter 60%.
Select the second stop from the left in the slider, and then do the following:
In the Position box, enter 100%.
In the Transparency box, enter 0%.
 Also in the Format Shape dialog box, click Line Color in the right pane, and in the Line Color pane select No Line.
Select the shape. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align to slide.
Click Align Center.
On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
Select the background picture. On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
For Green Future

8. Plastic Blocks storm water drains & clogs rivers.
REALITY
Plastic Blocks storm water drains & clogs rivers.
Pictures with reflection and blurred background
(Basic)
To reproduce the picture effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Images group, click Picture.
In the Insert Picture dialog box, select a picture and then click Insert.
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the arrow below Crop, point to Crop to Shape, and then under Rectangles click Round Diagonal Corner Rectangle.
Also under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Reflection in the right pane, and in the Reflection pane, in the Presets list, click Half Reflection, Touching.
In the Insert Picture dialog box, select a different picture and then click Insert. Repeat this process until there are three pictures on the slide.
Select the second picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the third picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the second picture.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the third picture.
Press and hold CTRL, and then select all three pictures. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align Selected Objects.
Click Align Middle.
To reproduce the background effects on this slide, do the following:
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the width is set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Artistic Effects in the left pane, and in the Artistic Effects pane, do the following:
Click the button next to Presets and then click Blur (second row, fifth option from the left).
In the Radius box, enter 30.
On the Home tab, in the Drawing group, click Shapes, and under Rectangles click Rectangle (first option from the left).
Drag to draw a rectangle on the slide.
Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, enter 7.5” into the Height box and enter 10” into the Width box.
Also under Drawing Tools, on the Format tab, in the Shape Styles group, click Shape Fill, point to Gradients, and then click More Gradients. In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
In the Type list, select Radial.
In the Direction list, select From Center.
Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop from the left in the slider, and then do the following:
In the Position box, enter 0%.
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Transparency box, enter 60%.
Select the second stop from the left in the slider, and then do the following:
In the Position box, enter 100%.
In the Transparency box, enter 0%.
 Also in the Format Shape dialog box, click Line Color in the right pane, and in the Line Color pane select No Line.
Select the shape. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align to slide.
Click Align Center.
On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
Select the background picture. On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
For Green Future

9. RUDRA’S APPROCH After two years of research and trials
We Rudra Environmental Solution India Ltd have
been successful in getting rid of non-degradable
polymer waste by Gasolysis process and
generating poly fuel from such plastic waste.
The trials have been successful in Disintegration
of all kind of plastic from old plastic waste, bottles,
small micron bags even the food pouches & food
wrappers, cable covers & old tyres.
Pictures with reflection and blurred background
(Basic)
To reproduce the picture effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Images group, click Picture.
In the Insert Picture dialog box, select a picture and then click Insert.
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the arrow below Crop, point to Crop to Shape, and then under Rectangles click Round Diagonal Corner Rectangle.
Also under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Reflection in the right pane, and in the Reflection pane, in the Presets list, click Half Reflection, Touching.
In the Insert Picture dialog box, select a different picture and then click Insert. Repeat this process until there are three pictures on the slide.
Select the second picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the third picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the second picture.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the third picture.
Press and hold CTRL, and then select all three pictures. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align Selected Objects.
Click Align Middle.
To reproduce the background effects on this slide, do the following:
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the width is set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Artistic Effects in the left pane, and in the Artistic Effects pane, do the following:
Click the button next to Presets and then click Blur (second row, fifth option from the left).
In the Radius box, enter 30.
On the Home tab, in the Drawing group, click Shapes, and under Rectangles click Rectangle (first option from the left).
Drag to draw a rectangle on the slide.
Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, enter 7.5” into the Height box and enter 10” into the Width box.
Also under Drawing Tools, on the Format tab, in the Shape Styles group, click Shape Fill, point to Gradients, and then click More Gradients. In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
In the Type list, select Radial.
In the Direction list, select From Center.
Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop from the left in the slider, and then do the following:
In the Position box, enter 0%.
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Transparency box, enter 60%.
Select the second stop from the left in the slider, and then do the following:
In the Position box, enter 100%.
In the Transparency box, enter 0%.
 Also in the Format Shape dialog box, click Line Color in the right pane, and in the Line Color pane select No Line.
Select the shape. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align to slide.
Click Align Center.
On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
Select the background picture. On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
For Green Future

10. RUDRA PLANT First Trial Plant of 50 Kg Capacity For Green Future
Pictures with reflection and blurred background
(Basic)
To reproduce the picture effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Images group, click Picture.
In the Insert Picture dialog box, select a picture and then click Insert.
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the arrow below Crop, point to Crop to Shape, and then under Rectangles click Round Diagonal Corner Rectangle.
Also under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Reflection in the right pane, and in the Reflection pane, in the Presets list, click Half Reflection, Touching.
In the Insert Picture dialog box, select a different picture and then click Insert. Repeat this process until there are three pictures on the slide.
Select the second picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the third picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the second picture.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the third picture.
Press and hold CTRL, and then select all three pictures. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align Selected Objects.
Click Align Middle.
To reproduce the background effects on this slide, do the following:
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the width is set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Artistic Effects in the left pane, and in the Artistic Effects pane, do the following:
Click the button next to Presets and then click Blur (second row, fifth option from the left).
In the Radius box, enter 30.
On the Home tab, in the Drawing group, click Shapes, and under Rectangles click Rectangle (first option from the left).
Drag to draw a rectangle on the slide.
Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, enter 7.5” into the Height box and enter 10” into the Width box.
Also under Drawing Tools, on the Format tab, in the Shape Styles group, click Shape Fill, point to Gradients, and then click More Gradients. In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
In the Type list, select Radial.
In the Direction list, select From Center.
Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop from the left in the slider, and then do the following:
In the Position box, enter 0%.
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Transparency box, enter 60%.
Select the second stop from the left in the slider, and then do the following:
In the Position box, enter 100%.
In the Transparency box, enter 0%.
 Also in the Format Shape dialog box, click Line Color in the right pane, and in the Line Color pane select No Line.
Select the shape. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align to slide.
Click Align Center.
On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
Select the background picture. On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
First Trial Plant of 50 Kg Capacity
For Green Future

11. PLANNING COMMISSION TAKEN COGNIZENCE OF OUR PLANT
Pictures with reflection and blurred background
(Basic)
To reproduce the picture effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Images group, click Picture.
In the Insert Picture dialog box, select a picture and then click Insert.
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the arrow below Crop, point to Crop to Shape, and then under Rectangles click Round Diagonal Corner Rectangle.
Also under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Reflection in the right pane, and in the Reflection pane, in the Presets list, click Half Reflection, Touching.
In the Insert Picture dialog box, select a different picture and then click Insert. Repeat this process until there are three pictures on the slide.
Select the second picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the third picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the second picture.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the third picture.
Press and hold CTRL, and then select all three pictures. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align Selected Objects.
Click Align Middle.
To reproduce the background effects on this slide, do the following:
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the width is set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Artistic Effects in the left pane, and in the Artistic Effects pane, do the following:
Click the button next to Presets and then click Blur (second row, fifth option from the left).
In the Radius box, enter 30.
On the Home tab, in the Drawing group, click Shapes, and under Rectangles click Rectangle (first option from the left).
Drag to draw a rectangle on the slide.
Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, enter 7.5” into the Height box and enter 10” into the Width box.
Also under Drawing Tools, on the Format tab, in the Shape Styles group, click Shape Fill, point to Gradients, and then click More Gradients. In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
In the Type list, select Radial.
In the Direction list, select From Center.
Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop from the left in the slider, and then do the following:
In the Position box, enter 0%.
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Transparency box, enter 60%.
Select the second stop from the left in the slider, and then do the following:
In the Position box, enter 100%.
In the Transparency box, enter 0%.
 Also in the Format Shape dialog box, click Line Color in the right pane, and in the Line Color pane select No Line.
Select the shape. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align to slide.
Click Align Center.
On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
Select the background picture. On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
For Green Future

12. NEW RUDRA PLANT Actual Plant of 200 Kg Capacity For Green Future
Pictures with reflection and blurred background
(Basic)
To reproduce the picture effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Images group, click Picture.
In the Insert Picture dialog box, select a picture and then click Insert.
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the arrow below Crop, point to Crop to Shape, and then under Rectangles click Round Diagonal Corner Rectangle.
Also under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Reflection in the right pane, and in the Reflection pane, in the Presets list, click Half Reflection, Touching.
In the Insert Picture dialog box, select a different picture and then click Insert. Repeat this process until there are three pictures on the slide.
Select the second picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the third picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the second picture.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the third picture.
Press and hold CTRL, and then select all three pictures. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align Selected Objects.
Click Align Middle.
To reproduce the background effects on this slide, do the following:
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the width is set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Artistic Effects in the left pane, and in the Artistic Effects pane, do the following:
Click the button next to Presets and then click Blur (second row, fifth option from the left).
In the Radius box, enter 30.
On the Home tab, in the Drawing group, click Shapes, and under Rectangles click Rectangle (first option from the left).
Drag to draw a rectangle on the slide.
Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, enter 7.5” into the Height box and enter 10” into the Width box.
Also under Drawing Tools, on the Format tab, in the Shape Styles group, click Shape Fill, point to Gradients, and then click More Gradients. In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
In the Type list, select Radial.
In the Direction list, select From Center.
Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop from the left in the slider, and then do the following:
In the Position box, enter 0%.
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Transparency box, enter 60%.
Select the second stop from the left in the slider, and then do the following:
In the Position box, enter 100%.
In the Transparency box, enter 0%.
 Also in the Format Shape dialog box, click Line Color in the right pane, and in the Line Color pane select No Line.
Select the shape. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align to slide.
Click Align Center.
On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
Select the background picture. On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
Actual Plant of 200 Kg Capacity
For Green Future

13. RUDRA PROCESS GASOLYSIS is the decomposition of a condensed
substance by heating. It does not involve reactions
with oxygen or any other reagents but can take
place in their presence.
The waste plastic is converted in to Polyfuel by
process of Catalytic Gasolysis Process.
The yield produced is almost 50 to 55% of the
plastic waste disintegrated.
Pictures with reflection and blurred background
(Basic)
To reproduce the picture effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Images group, click Picture.
In the Insert Picture dialog box, select a picture and then click Insert.
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the arrow below Crop, point to Crop to Shape, and then under Rectangles click Round Diagonal Corner Rectangle.
Also under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Reflection in the right pane, and in the Reflection pane, in the Presets list, click Half Reflection, Touching.
In the Insert Picture dialog box, select a different picture and then click Insert. Repeat this process until there are three pictures on the slide.
Select the second picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the third picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the second picture.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the third picture.
Press and hold CTRL, and then select all three pictures. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align Selected Objects.
Click Align Middle.
To reproduce the background effects on this slide, do the following:
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the width is set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Artistic Effects in the left pane, and in the Artistic Effects pane, do the following:
Click the button next to Presets and then click Blur (second row, fifth option from the left).
In the Radius box, enter 30.
On the Home tab, in the Drawing group, click Shapes, and under Rectangles click Rectangle (first option from the left).
Drag to draw a rectangle on the slide.
Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, enter 7.5” into the Height box and enter 10” into the Width box.
Also under Drawing Tools, on the Format tab, in the Shape Styles group, click Shape Fill, point to Gradients, and then click More Gradients. In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
In the Type list, select Radial.
In the Direction list, select From Center.
Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop from the left in the slider, and then do the following:
In the Position box, enter 0%.
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Transparency box, enter 60%.
Select the second stop from the left in the slider, and then do the following:
In the Position box, enter 100%.
In the Transparency box, enter 0%.
 Also in the Format Shape dialog box, click Line Color in the right pane, and in the Line Color pane select No Line.
Select the shape. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align to slide.
Click Align Center.
On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
Select the background picture. On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
For Green Future

14. RUDRA PROCESS The process provides an integrated plastic waste
processing system which offers an alternative to
landfill disposal, incineration, and recycling—while
being a viable, economical, and environmentally-
responsible waste management solution.
The Rudra Process can easily handle plastic that
is contaminated with other kinds of waste such as,
dirt, water, etc.
Pictures with reflection and blurred background
(Basic)
To reproduce the picture effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Images group, click Picture.
In the Insert Picture dialog box, select a picture and then click Insert.
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the arrow below Crop, point to Crop to Shape, and then under Rectangles click Round Diagonal Corner Rectangle.
Also under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Reflection in the right pane, and in the Reflection pane, in the Presets list, click Half Reflection, Touching.
In the Insert Picture dialog box, select a different picture and then click Insert. Repeat this process until there are three pictures on the slide.
Select the second picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the third picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the second picture.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the third picture.
Press and hold CTRL, and then select all three pictures. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align Selected Objects.
Click Align Middle.
To reproduce the background effects on this slide, do the following:
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the width is set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Artistic Effects in the left pane, and in the Artistic Effects pane, do the following:
Click the button next to Presets and then click Blur (second row, fifth option from the left).
In the Radius box, enter 30.
On the Home tab, in the Drawing group, click Shapes, and under Rectangles click Rectangle (first option from the left).
Drag to draw a rectangle on the slide.
Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, enter 7.5” into the Height box and enter 10” into the Width box.
Also under Drawing Tools, on the Format tab, in the Shape Styles group, click Shape Fill, point to Gradients, and then click More Gradients. In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
In the Type list, select Radial.
In the Direction list, select From Center.
Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop from the left in the slider, and then do the following:
In the Position box, enter 0%.
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Transparency box, enter 60%.
Select the second stop from the left in the slider, and then do the following:
In the Position box, enter 100%.
In the Transparency box, enter 0%.
 Also in the Format Shape dialog box, click Line Color in the right pane, and in the Line Color pane select No Line.
Select the shape. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align to slide.
Click Align Center.
On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
Select the background picture. On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
For Green Future

15. ADVANTAGES OF THIS TECHNOLOGY
Getting rid of plastic waste,
Self sufficiency for fuel consumption (typically for industrial/commercial) fuel requirement.
Eco-friendly Process, no harmful gases/effluent produced ,
No Pollution from waste treatment.
The plant is run on the gas generated from the process
Pictures with reflection and blurred background
(Basic)
To reproduce the picture effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Images group, click Picture.
In the Insert Picture dialog box, select a picture and then click Insert.
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the arrow below Crop, point to Crop to Shape, and then under Rectangles click Round Diagonal Corner Rectangle.
Also under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Reflection in the right pane, and in the Reflection pane, in the Presets list, click Half Reflection, Touching.
In the Insert Picture dialog box, select a different picture and then click Insert. Repeat this process until there are three pictures on the slide.
Select the second picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the third picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the second picture.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the third picture.
Press and hold CTRL, and then select all three pictures. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align Selected Objects.
Click Align Middle.
To reproduce the background effects on this slide, do the following:
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the width is set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Artistic Effects in the left pane, and in the Artistic Effects pane, do the following:
Click the button next to Presets and then click Blur (second row, fifth option from the left).
In the Radius box, enter 30.
On the Home tab, in the Drawing group, click Shapes, and under Rectangles click Rectangle (first option from the left).
Drag to draw a rectangle on the slide.
Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, enter 7.5” into the Height box and enter 10” into the Width box.
Also under Drawing Tools, on the Format tab, in the Shape Styles group, click Shape Fill, point to Gradients, and then click More Gradients. In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
In the Type list, select Radial.
In the Direction list, select From Center.
Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop from the left in the slider, and then do the following:
In the Position box, enter 0%.
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Transparency box, enter 60%.
Select the second stop from the left in the slider, and then do the following:
In the Position box, enter 100%.
In the Transparency box, enter 0%.
 Also in the Format Shape dialog box, click Line Color in the right pane, and in the Line Color pane select No Line.
Select the shape. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align to slide.
Click Align Center.
On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
Select the background picture. On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
For Green Future

16. ADVANTAGES OF THIS TECHNOLOGY
Environmental friendly,
Attracts Carbon Credits.
We have been successful in processing all types of plastic waste.
Different size (from 200kg to 2000 Kg) plant which is easy to handle & manage.
Employment generation for locals, and waste pickers.
Pictures with reflection and blurred background
(Basic)
To reproduce the picture effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Images group, click Picture.
In the Insert Picture dialog box, select a picture and then click Insert.
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the arrow below Crop, point to Crop to Shape, and then under Rectangles click Round Diagonal Corner Rectangle.
Also under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Reflection in the right pane, and in the Reflection pane, in the Presets list, click Half Reflection, Touching.
In the Insert Picture dialog box, select a different picture and then click Insert. Repeat this process until there are three pictures on the slide.
Select the second picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the third picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the second picture.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the third picture.
Press and hold CTRL, and then select all three pictures. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align Selected Objects.
Click Align Middle.
To reproduce the background effects on this slide, do the following:
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the width is set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Artistic Effects in the left pane, and in the Artistic Effects pane, do the following:
Click the button next to Presets and then click Blur (second row, fifth option from the left).
In the Radius box, enter 30.
On the Home tab, in the Drawing group, click Shapes, and under Rectangles click Rectangle (first option from the left).
Drag to draw a rectangle on the slide.
Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, enter 7.5” into the Height box and enter 10” into the Width box.
Also under Drawing Tools, on the Format tab, in the Shape Styles group, click Shape Fill, point to Gradients, and then click More Gradients. In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
In the Type list, select Radial.
In the Direction list, select From Center.
Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop from the left in the slider, and then do the following:
In the Position box, enter 0%.
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Transparency box, enter 60%.
Select the second stop from the left in the slider, and then do the following:
In the Position box, enter 100%.
In the Transparency box, enter 0%.
 Also in the Format Shape dialog box, click Line Color in the right pane, and in the Line Color pane select No Line.
Select the shape. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align to slide.
Click Align Center.
On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
Select the background picture. On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
For Green Future

17. ADVANTAGE OF RUDRA TECHNOLOGY
The poly fuel generated from this
process can be used in gensets
to produce electricity.
This can also be used to light up
local parks, street lights.
Trials on using the poly fuel in other machinery are going on at present.
Pictures with reflection and blurred background
(Basic)
To reproduce the picture effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Images group, click Picture.
In the Insert Picture dialog box, select a picture and then click Insert.
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the arrow below Crop, point to Crop to Shape, and then under Rectangles click Round Diagonal Corner Rectangle.
Also under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Reflection in the right pane, and in the Reflection pane, in the Presets list, click Half Reflection, Touching.
In the Insert Picture dialog box, select a different picture and then click Insert. Repeat this process until there are three pictures on the slide.
Select the second picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the third picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the second picture.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the third picture.
Press and hold CTRL, and then select all three pictures. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align Selected Objects.
Click Align Middle.
To reproduce the background effects on this slide, do the following:
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the width is set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Artistic Effects in the left pane, and in the Artistic Effects pane, do the following:
Click the button next to Presets and then click Blur (second row, fifth option from the left).
In the Radius box, enter 30.
On the Home tab, in the Drawing group, click Shapes, and under Rectangles click Rectangle (first option from the left).
Drag to draw a rectangle on the slide.
Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, enter 7.5” into the Height box and enter 10” into the Width box.
Also under Drawing Tools, on the Format tab, in the Shape Styles group, click Shape Fill, point to Gradients, and then click More Gradients. In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
In the Type list, select Radial.
In the Direction list, select From Center.
Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop from the left in the slider, and then do the following:
In the Position box, enter 0%.
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Transparency box, enter 60%.
Select the second stop from the left in the slider, and then do the following:
In the Position box, enter 100%.
In the Transparency box, enter 0%.
 Also in the Format Shape dialog box, click Line Color in the right pane, and in the Line Color pane select No Line.
Select the shape. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align to slide.
Click Align Center.
On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
Select the background picture. On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
For Green Future

18. THE CURRENT GOAL OF RUDRA
Create awareness of segregation of plastic in the homes
To create mechanism for plastic waste management.
To deal sustainably with the issue of plastic waste
Pictures with reflection and blurred background
(Basic)
To reproduce the picture effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Images group, click Picture.
In the Insert Picture dialog box, select a picture and then click Insert.
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the arrow below Crop, point to Crop to Shape, and then under Rectangles click Round Diagonal Corner Rectangle.
Also under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Reflection in the right pane, and in the Reflection pane, in the Presets list, click Half Reflection, Touching.
In the Insert Picture dialog box, select a different picture and then click Insert. Repeat this process until there are three pictures on the slide.
Select the second picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the third picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the second picture.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the third picture.
Press and hold CTRL, and then select all three pictures. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align Selected Objects.
Click Align Middle.
To reproduce the background effects on this slide, do the following:
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the width is set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Artistic Effects in the left pane, and in the Artistic Effects pane, do the following:
Click the button next to Presets and then click Blur (second row, fifth option from the left).
In the Radius box, enter 30.
On the Home tab, in the Drawing group, click Shapes, and under Rectangles click Rectangle (first option from the left).
Drag to draw a rectangle on the slide.
Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, enter 7.5” into the Height box and enter 10” into the Width box.
Also under Drawing Tools, on the Format tab, in the Shape Styles group, click Shape Fill, point to Gradients, and then click More Gradients. In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
In the Type list, select Radial.
In the Direction list, select From Center.
Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop from the left in the slider, and then do the following:
In the Position box, enter 0%.
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Transparency box, enter 60%.
Select the second stop from the left in the slider, and then do the following:
In the Position box, enter 100%.
In the Transparency box, enter 0%.
 Also in the Format Shape dialog box, click Line Color in the right pane, and in the Line Color pane select No Line.
Select the shape. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align to slide.
Click Align Center.
On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
Select the background picture. On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
For Green Future

19. THE FOUR POINT OBJECTIVE
Segregation at house level
Collection from home and other places
Storage and segregation of various types of plastic
Processing and reducing stress on nature
Pictures with reflection and blurred background
(Basic)
To reproduce the picture effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Images group, click Picture.
In the Insert Picture dialog box, select a picture and then click Insert.
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the arrow below Crop, point to Crop to Shape, and then under Rectangles click Round Diagonal Corner Rectangle.
Also under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Reflection in the right pane, and in the Reflection pane, in the Presets list, click Half Reflection, Touching.
In the Insert Picture dialog box, select a different picture and then click Insert. Repeat this process until there are three pictures on the slide.
Select the second picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the third picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the second picture.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the third picture.
Press and hold CTRL, and then select all three pictures. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align Selected Objects.
Click Align Middle.
To reproduce the background effects on this slide, do the following:
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the width is set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Artistic Effects in the left pane, and in the Artistic Effects pane, do the following:
Click the button next to Presets and then click Blur (second row, fifth option from the left).
In the Radius box, enter 30.
On the Home tab, in the Drawing group, click Shapes, and under Rectangles click Rectangle (first option from the left).
Drag to draw a rectangle on the slide.
Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, enter 7.5” into the Height box and enter 10” into the Width box.
Also under Drawing Tools, on the Format tab, in the Shape Styles group, click Shape Fill, point to Gradients, and then click More Gradients. In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
In the Type list, select Radial.
In the Direction list, select From Center.
Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop from the left in the slider, and then do the following:
In the Position box, enter 0%.
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Transparency box, enter 60%.
Select the second stop from the left in the slider, and then do the following:
In the Position box, enter 100%.
In the Transparency box, enter 0%.
 Also in the Format Shape dialog box, click Line Color in the right pane, and in the Line Color pane select No Line.
Select the shape. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align to slide.
Click Align Center.
On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
Select the background picture. On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
For Green Future

20. APPEAL TO CITIZENS To Segregate the plastic waste in your home
Collect the plastic waste from building and keep it separate
Once the bag is full give us a call on
WE will collect it free of charge
Pictures with reflection and blurred background
(Basic)
To reproduce the picture effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Images group, click Picture.
In the Insert Picture dialog box, select a picture and then click Insert.
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the arrow below Crop, point to Crop to Shape, and then under Rectangles click Round Diagonal Corner Rectangle.
Also under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Reflection in the right pane, and in the Reflection pane, in the Presets list, click Half Reflection, Touching.
In the Insert Picture dialog box, select a different picture and then click Insert. Repeat this process until there are three pictures on the slide.
Select the second picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the third picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the second picture.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the third picture.
Press and hold CTRL, and then select all three pictures. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align Selected Objects.
Click Align Middle.
To reproduce the background effects on this slide, do the following:
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the width is set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Artistic Effects in the left pane, and in the Artistic Effects pane, do the following:
Click the button next to Presets and then click Blur (second row, fifth option from the left).
In the Radius box, enter 30.
On the Home tab, in the Drawing group, click Shapes, and under Rectangles click Rectangle (first option from the left).
Drag to draw a rectangle on the slide.
Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, enter 7.5” into the Height box and enter 10” into the Width box.
Also under Drawing Tools, on the Format tab, in the Shape Styles group, click Shape Fill, point to Gradients, and then click More Gradients. In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
In the Type list, select Radial.
In the Direction list, select From Center.
Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop from the left in the slider, and then do the following:
In the Position box, enter 0%.
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Transparency box, enter 60%.
Select the second stop from the left in the slider, and then do the following:
In the Position box, enter 100%.
In the Transparency box, enter 0%.
 Also in the Format Shape dialog box, click Line Color in the right pane, and in the Line Color pane select No Line.
Select the shape. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align to slide.
Click Align Center.
On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
Select the background picture. On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
For Green Future

21. ACCEPTED PLASTIC WASTE
Milk Bags / Oil Bags ,
Food Bags ,
Yogurt containers/ Plastic Glasses,
Cooking Oil Canisters
Laminate Tubes (Tooth paste, Medicines )
Carry Bags ( all micron thickness)
Blister Packing, Bubble wraps
Pictures with reflection and blurred background
(Basic)
To reproduce the picture effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Images group, click Picture.
In the Insert Picture dialog box, select a picture and then click Insert.
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the arrow below Crop, point to Crop to Shape, and then under Rectangles click Round Diagonal Corner Rectangle.
Also under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Reflection in the right pane, and in the Reflection pane, in the Presets list, click Half Reflection, Touching.
In the Insert Picture dialog box, select a different picture and then click Insert. Repeat this process until there are three pictures on the slide.
Select the second picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the third picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the second picture.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the third picture.
Press and hold CTRL, and then select all three pictures. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align Selected Objects.
Click Align Middle.
To reproduce the background effects on this slide, do the following:
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the width is set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Artistic Effects in the left pane, and in the Artistic Effects pane, do the following:
Click the button next to Presets and then click Blur (second row, fifth option from the left).
In the Radius box, enter 30.
On the Home tab, in the Drawing group, click Shapes, and under Rectangles click Rectangle (first option from the left).
Drag to draw a rectangle on the slide.
Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, enter 7.5” into the Height box and enter 10” into the Width box.
Also under Drawing Tools, on the Format tab, in the Shape Styles group, click Shape Fill, point to Gradients, and then click More Gradients. In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
In the Type list, select Radial.
In the Direction list, select From Center.
Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop from the left in the slider, and then do the following:
In the Position box, enter 0%.
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Transparency box, enter 60%.
Select the second stop from the left in the slider, and then do the following:
In the Position box, enter 100%.
In the Transparency box, enter 0%.
 Also in the Format Shape dialog box, click Line Color in the right pane, and in the Line Color pane select No Line.
Select the shape. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align to slide.
Click Align Center.
On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
Select the background picture. On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
For Green Future

22. ACCEPTED PLASTIC WASTE
PET bottles (Bisleri, soft drinks, Toilet cleaning material, )
Shampoo/ powder bottles / empty sachet
Detergent Bags (Surf, Tide,Excel, Nirma etc.)
Food Item Bags (Wafer, Kurkure, Farsan, etc.) wrappers
Blister Packing, Bubble wraps
Plastic flowers, Buckets
Pictures with reflection and blurred background
(Basic)
To reproduce the picture effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Images group, click Picture.
In the Insert Picture dialog box, select a picture and then click Insert.
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the arrow below Crop, point to Crop to Shape, and then under Rectangles click Round Diagonal Corner Rectangle.
Also under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Reflection in the right pane, and in the Reflection pane, in the Presets list, click Half Reflection, Touching.
In the Insert Picture dialog box, select a different picture and then click Insert. Repeat this process until there are three pictures on the slide.
Select the second picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the third picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the second picture.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the third picture.
Press and hold CTRL, and then select all three pictures. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align Selected Objects.
Click Align Middle.
To reproduce the background effects on this slide, do the following:
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the width is set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Artistic Effects in the left pane, and in the Artistic Effects pane, do the following:
Click the button next to Presets and then click Blur (second row, fifth option from the left).
In the Radius box, enter 30.
On the Home tab, in the Drawing group, click Shapes, and under Rectangles click Rectangle (first option from the left).
Drag to draw a rectangle on the slide.
Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, enter 7.5” into the Height box and enter 10” into the Width box.
Also under Drawing Tools, on the Format tab, in the Shape Styles group, click Shape Fill, point to Gradients, and then click More Gradients. In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
In the Type list, select Radial.
In the Direction list, select From Center.
Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop from the left in the slider, and then do the following:
In the Position box, enter 0%.
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Transparency box, enter 60%.
Select the second stop from the left in the slider, and then do the following:
In the Position box, enter 100%.
In the Transparency box, enter 0%.
 Also in the Format Shape dialog box, click Line Color in the right pane, and in the Line Color pane select No Line.
Select the shape. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align to slide.
Click Align Center.
On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
Select the background picture. On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
For Green Future

23. RUDRA IN NEWSPAPER For Green Future
Pictures with reflection and blurred background
(Basic)
To reproduce the picture effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Images group, click Picture.
In the Insert Picture dialog box, select a picture and then click Insert.
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the arrow below Crop, point to Crop to Shape, and then under Rectangles click Round Diagonal Corner Rectangle.
Also under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Reflection in the right pane, and in the Reflection pane, in the Presets list, click Half Reflection, Touching.
In the Insert Picture dialog box, select a different picture and then click Insert. Repeat this process until there are three pictures on the slide.
Select the second picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the third picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the second picture.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the third picture.
Press and hold CTRL, and then select all three pictures. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align Selected Objects.
Click Align Middle.
To reproduce the background effects on this slide, do the following:
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the width is set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Artistic Effects in the left pane, and in the Artistic Effects pane, do the following:
Click the button next to Presets and then click Blur (second row, fifth option from the left).
In the Radius box, enter 30.
On the Home tab, in the Drawing group, click Shapes, and under Rectangles click Rectangle (first option from the left).
Drag to draw a rectangle on the slide.
Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, enter 7.5” into the Height box and enter 10” into the Width box.
Also under Drawing Tools, on the Format tab, in the Shape Styles group, click Shape Fill, point to Gradients, and then click More Gradients. In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
In the Type list, select Radial.
In the Direction list, select From Center.
Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop from the left in the slider, and then do the following:
In the Position box, enter 0%.
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Transparency box, enter 60%.
Select the second stop from the left in the slider, and then do the following:
In the Position box, enter 100%.
In the Transparency box, enter 0%.
 Also in the Format Shape dialog box, click Line Color in the right pane, and in the Line Color pane select No Line.
Select the shape. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align to slide.
Click Align Center.
On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
Select the background picture. On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
For Green Future

24. THANK YOU For Green Future RUDRA ENVIORNMENTAL SOLUTION (INDIA) LTD
B- 1 Minar Aprt,124/1 Erandwane,
Law College Rd, Pune
Tel: ( 020 )
Pictures with reflection and blurred background
(Basic)
To reproduce the picture effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Images group, click Picture.
In the Insert Picture dialog box, select a picture and then click Insert.
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the arrow below Crop, point to Crop to Shape, and then under Rectangles click Round Diagonal Corner Rectangle.
Also under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Reflection in the right pane, and in the Reflection pane, in the Presets list, click Half Reflection, Touching.
In the Insert Picture dialog box, select a different picture and then click Insert. Repeat this process until there are three pictures on the slide.
Select the second picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the third picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2” and the width is set to 2.4”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the second picture.
Select the first picture. On the Home tab, in the Clipboard group, click Format Painter. With the Format Painter cursor, on the slide, click the third picture.
Press and hold CTRL, and then select all three pictures. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align Selected Objects.
Click Align Middle.
To reproduce the background effects on this slide, do the following:
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the width is set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Artistic Effects in the left pane, and in the Artistic Effects pane, do the following:
Click the button next to Presets and then click Blur (second row, fifth option from the left).
In the Radius box, enter 30.
On the Home tab, in the Drawing group, click Shapes, and under Rectangles click Rectangle (first option from the left).
Drag to draw a rectangle on the slide.
Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, enter 7.5” into the Height box and enter 10” into the Width box.
Also under Drawing Tools, on the Format tab, in the Shape Styles group, click Shape Fill, point to Gradients, and then click More Gradients. In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
In the Type list, select Radial.
In the Direction list, select From Center.
Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop from the left in the slider, and then do the following:
In the Position box, enter 0%.
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Transparency box, enter 60%.
Select the second stop from the left in the slider, and then do the following:
In the Position box, enter 100%.
In the Transparency box, enter 0%.
 Also in the Format Shape dialog box, click Line Color in the right pane, and in the Line Color pane select No Line.
Select the shape. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align to slide.
Click Align Center.
On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
Select the background picture. On the Home tab, in the Drawing group, click Arrange, and then click Send to Back.
Visit us at :
For Green Future