1. TAU Panel: Timing constraints: Are they constraining designs or designers Bruce Zahn March 2015

2. Design Flow Constraints used throughout entire flow Must be correct, realistic, understood by multiple tools Missing/inconsistent/conflicting constraints lead to problems in optimization Over constraining may cause implementation tool to thrash Multiple constraint inputs must be managed throughout design process Constraints change throughout flow Constraint management for hierarchical design flow SynthesisDFTPlacementCTSRoute Signoff STA Functional Constraints IP Constraints IP Constraints DFT Constraints Customer/front end IP provider DFT Source

3. Hierarchical Constraints Design partitioned and implemented in parallel across multiple locations Must support top-down and bottom up flow Blocks available first Top level always comes late Constraints flexible to support model or flat (netlist) view of block Top and blocks need to be independent to allow concurrent design Block constraints slightly pessimistic compared to top This may cause some consistency issues Do not want to re-open closed blocks due to top level changes

4. SDC Vs. TCL SDC Common constraint set – consistency across tools Must be re-generated When constraints change Different configuration of netlist (flat vs. models) Machine generated – very difficult to work with (read/edit/debug) Busses and wildcards expanded TCL Compact, readable and easier to debug/modify Support variables, wildcards, conditional statements Constraint set customized to work with hierarchical flow Block represented as model or netlist Some tcl commands not understood by all tools

5. Merged Constraints vs. MCMM Implementation using Multi-Corner-Multi-Mode Resource intensive – many scenarios Difficult to check all real paths constrained across all modes Need models for all modes Not all modes exist due to complexity of constraint generation Results in some path unconstrained in optimization tool Merged Constraints Difficult to generate and manage Some EDA tools perform mode merging Time consuming to verify merged constraints Many false violations due to transfers that are not real Func clocks  DFT clocks

6. How can EDA tools help Need EDA tools to help manage constraints Output constraints in readable format – do not expand Improved merged or MCMM flow Ability to validate quality of constraints across all scenarios Support hierarchical design constraints where blocks may be either: Models – cannot see inside Flat netlist – can see internals Support bottom up flow

7. Intel Confidential — Do Not Forward