1. TM640 ALARMS, TRENDS AND DIAGNOSTICS

2. Alarm system Trend systemDiagnostics Summary Alarms, Trends and Diagnostics Diagnostics

3. Various methods for assigning URLs

4. Linking the HTML control to a text group

6. Activating the System Diagnostics Manager

7. URLs for displaying the SDM Panel sizeHTMLView sizeURL QVGA316 x 191http://127.0.0.1/sdm-qvga/qvga.cgi VGA620 x 339http://127.0.0.1/sdm-vga/vga.cgi XGA1004 x 567http://127.0.0.1/sdm-xga/xga.cgi

8. Results

9. Alarm system Trend systemDiagnostics Summary Alarms, Trends and Diagnostics Trend system

10. Trend control components Trend curves Time axis Measurement cursor Axis labels Value axis Trend container

11. Creating the trend control

12. Trend Wizard Online trend Data point values are displayed over time value =20 4060

13. Setting the time range and sampling rate Duration Displayed time range In this example: Duration [s]: 90 => 01:30 min Sampling rate Sampling rate – specifies the intervals at which the value is sampled and displayed

14. Setting the recording mode Single A specific duration is recorded Continuous Time axis is continuous Current trend values always displayed 02:60

15. Trend types User trend Values from an array are read and displayed trend_array = { 20, 40, 60 } 50 ms100 ms 150 ms

16. Displaying curves in the trend control Channels Specifies how many trend curves are displayed in the control

17. Linking trend curves with the logic Trend data For each trend curve assign a data point and color

18. Linking trend curves with the logic

20. Appearance Grid Grid and color settings Scales Color settings

21. Configuring the measurement cursor

22. Trend data properties

24. Trend components

25. Trend data assignments

26. Alarm system Trend systemDiagnostics Summary Alarms, Trends and Diagnostics Alarm system

27. Alarm configuration Display Alarm text Status messages Error states Acknowledgement Everything at a glance Clearly organized Bitmaps

28. Alarm groups

29. Message type - Acknowledgment requirements Messages Operating states Acknowledgment not required Non-critical Warnings Error states Acknowledgment preferred No action required Alarms Critical error states Acknowledgment required Action necessary

30. Linking the alarm group with the logic

31. Effect of the logic on the alarm system alarmCoffee [ 0 ] = 1 000000 012345 000001100000000100 24

32. Alarm control configuration

33. Alarm lists Current Active and inactive unacknowledged History Possible to set which event is recorded Configuration Alarms from all groups except group alarms Alarms can only be bypassed here Active Active unacknowledged alarms

34. Display configuration

36. Alarm map - Current A l a r m t e x t 1 Alarm list A l a r m t e x t 5 00000000 00000010 01000010 01000000 01234567

37. Alarm map - History A l a r m t e x t 1 T Alarm history A l a r m t e x t 5 T 00000000 00000010 01000010 01000000 01234567 A l a r m t e x t 1 R

38. Alarm system Trend systemDiagnostics Summary Alarms, Trends and Diagnostics Summary

39. ASIV ALARMS, TRENDS AND DIAGNOSTICS TM640 TM600 Introduction to Visualization TM610 Working with Integrated Visualization TM640 Alarm, Trends and Diagnostics TM670 Advanced Visual Components