1. Vicon Industries Ltd Leading the Security Industry since 1967 Introduction to Vicon industries Ltd By Technical Support Department

3. Vicon Overview Established 1967 – European Headquarters in Fareham, Hampshire – Territory coverage “EMEA” – Sales/Technical Support – System design – Warranties and Repair facility

4. Agenda Brief overview of Vicon ViconNet – Basic Controls – Playback – Reports – Archiving

5. Operation via GUI

6. Site List, Site Maps and Groups Site List The site list give the operation an indication what is available for selection onto his operator page. The icon denotes if it is a fixed camera or a PTZ camera. If a red symbol appears next to the icon it denotes that the camera is not available Site Maps ViconNet allows for the addition of site maps that will give the operator a visual indication of camera location. Maps can be multilayer, so that the operator can drill down to obtain greater detail of the site. Cameras that are available for selection appear blue, with cameras that have been selected would change to green. The cameras will display on the GUI in the segment that has been selected. Group ViconNet allows for logical groups to be set-up, therefore giving the operator improved indication of the site. Eg Warehouse Cameras, Car Park Cameras, Building 1.

7. Site List Will show all cameras available on the systems Site Maps Will allow you to call up the maps Site Groups Will allow you to call up the groups that have been set up on the system

8. Display Controls Display Controls. The GUI offers the operator to select the amount of images that are required for view. These are single view, quad, 6 images, 9 images, 16 images and full screen of selected display. PTZ (Pan Tilt and Zoom) Controls Cameras that have been set-up as PTZ will appear in the list/group or map with a PTZ icon. On selection an indicator will be overlaid on the video image allowing all the cameras functionality. A keypad emulator will also appear on the GUI to offer further functions such as pre-set call up, auto-pan and auxiliary functions.

9. Display Controls Will allow you to view up to 16 cameras Single Quad 6 images 9 images 16 images PTZ (Pan Tilt & Zoom) This if available will allow full manual control of the cameras and setting and recall of pre-sets

10. PTZ Control Keypad Emulator allow you to set and recall pre-sets Controls Icons Will allow you via the mouse to control the movement of the camera Controls Icons Will allow you via the mouse to control the movement of the camera

11. Quick Playback This option is carried out on the main GUI screen when you are viewing a live image. With the mouse and hovering the curser over the image, if you use the right click button. You will be given the option of start quick playback from. You will be given seven options:- 10 seconds, 30 seconds, 1 minute, 2 minutes, 5 minutes, 10 minutes and 30 minutes. On the selection the recorded image will appear to the right or left of the live image. The playback function keys will now be made available to you. These will be at the bottom of the screen. This will give total control of the playback in both direction and at multiple speeds.

12. Quick Playback After selecting a camera that is on screen Right Click And select playback by time Quick Playback After selecting a camera that is on screen. Right Click. And select playback by time The playback will be shown next to the live image

13. Playback Playback Select (explanation of pink page) & Playback Selection area (explanation on blue bars) By using the method in the previous sections. You can choose the cameras that you need to playback. These now will appear as blue lines, indicating the recorded images. The more that you view in the more detail is given. You will note that the blue line start to show highs and lows. This is a visual indication of activity in front of the camera. Highs represent high activity and lows indicated reduced activity.

14. After Playback has been selected. Select the camera/s required A blue bar will appear indicating recordings (Last day) last 24 hours Last 3 days, Last week & All

15. After Playback has been selected. Select the camera/s required A blue bar will appear indicating recordings (Left)start of search (Right) end of search Start on playback indicator

16. Frame video codec – H.264 GOV- Length

17. Museum Search Museum Search (single camera search) This search method is limited to one camera at a time. Once you have selected the camera and the time period that you need to search within. Using the mouse and the left mouse key. Left click and drag the mouse to select the period. Then press the Museum Search button at the bottom of the GUI. The screen will change giving you a snap shot of the camera of interest. Using the tool box palette you can highlight the area of interest. The press the List + Picture button in the All Detections area, and the search will start. If movement is detected you will see the files being created in the central boxed area. This will list time of movement, which you can now use to do a more in depth search. Note Museum search is not available at this time on all IP cameras

18. Museum Search Select the camera and time period Highlight the time Between start and end of search (Light Blue Area) Press Museum search button

19. Use the toolbox to draw the area of interest Use the toolbox to draw the area of interest. Select the number of boxes to base the movement

20. Use the toolbox to draw the area of interest. Select the number of boxes to base the movement Use the toolbox to draw the area of interest Activity Files Indicating time of event Search indicator by time

21. Reports ViconNet Reports The system will allow the administrator to interrogate the system, to view current status and past history.

22. Reports Device Status – Show the status of all devices connected to a DVR and their status Alarm History – Show all alarm history on the device, which can be filtered to search between dates Event History – Will show all Event History of the device Recording Status – Show all recording status for the DVR or NVR Audit Log – Will give all device operational history of the device RVS Logs – Will show all recording verification of the device and all failures CFN Logs – Will show all Central Failure Notifications, which can be filtered to search between dates

23. Reports Report selection Device selection Report selection Device selection

24. Reports Type of report required Device that has been selected Ability to save to external USB/CD

25. Print/Export Image Print is available from the main GUI screen. This will allow you to make a hard copy print of what you have selected to a printer. A printer must be connected for this function to be made possible. Export Image is also available from the main GUI. This function will allow you to export a still recorded image to your computer files within your system.

26. When using the option for Print Whatever you have on screen you will print Press the Print button Then selecting the printer

27. Archiving The system will allow you to archive to CD/DVD/External Hard Drive. – By selecting the cameras of interest and the time and date – Selecting the duration of the archive to suit the media used CD = 650 MB DVD = 4.7 GB Pen Drive = ( dependent on drive ) !! Once this is done. Give the archive an extension name so that you can identify it at a later stage.

28. Once you have found the camera/s plus date and time. Left click and drag to the side to highlight the area to be archived. Press the Create Archive button The area selected will change Green. Once you have found the camera/s plus date and time. Left click and drag to the side to highlight the area to be archived. Press the Create Archive button The area selected will change Green. Select the drive And give the archive An archive name ext. Then press the start button.

29. Questions and Anwsers This is your opportunity to ask questions that relate to the training.