1. Cargo Gear Survey
… …………………......……………... ILO 32 ………………….…..……………………………. ILO ………………………………... TNS 15
Regulations & Procedures :

2. Applicable conventions
Cargo Gear survey
Applicable conventions
ILO 32 - protection against accidents (dockers) convention (revised) 1932
ILO occupational safety & health (dock work) convention 1979
Recommendation 160 adopted by the ILO

3. Cargo Gear survey
INITIAL SURVEY BEFORE BEING TAKEN INTO USE FOR THE FIRST TIME :
To be certified by a competent person
To be tested & thoroughly examined
Loose gear to be tested & thoroughly examined
A rigging plan to be provided (ILO 152)

4. Cargo Gear survey PERIODIC EXAMINATION & RE-TESTING (ILO 32)
A thorough examination every 12 months
Re-tested & thoroughly examined after substantial alteration or repair
Quadrennial survey conducted every 4 years
NB: No new item of loose gear is to be made of wrought iron.

5. Cargo Gear survey PERIODIC EXAMINATION & RE-TESTING (ILO 152)
A thorough examination every 12 months
Re-tested & thoroughly examined :
After substantial alteration or repair
Once in every 5 years
NB: No new item of loose gear is to be made of wrought iron.

6. Cargo Gear survey THOROUGH EXAMINATION:
Means a detailed visual examination by a competent person supplemented, if necessary, by other suitable means or measures in order to arrive at a reliable conclusion as to the safety of the lifting appliance or loose gear examined.

7. Cargo Gear survey INSPECTIONS
A visual examination carried out by a responsible person to decide whether, so far as can be ascertained in such a manner, the loose gear or sling is safe for continued use

8. Cargo Gear survey COMPETENT PERSON RESPONSIBLE PERSON
A person possessing the knowledge and experience required for the performance of thorough examinations and tests of lifting appliances & loose gear
RESPONSIBLE PERSON
Person appointed by the Master to be responsible for the performance of inspections and has sufficient knowledge and experience

9. Cargo Gear survey Derrick - Mast Derrick – Boom
Examination of the mast & hull structure, above & below decks adjacent to the appliance
Examination of the heel-pin housing attachment to the mast (gooseneck)
Examination of the padeyes attached to the mast
Derrick – Boom
Examination of the boom for damage & distortion
Examination of the heel-pin & connection to the boom
Examination of the padeyes

10. Derricks - Masts Mast (or derrick post) Gooseneck seating
Mast head span bearing bracket
Derrick boom
Derrick head fitting for cargo block and span rope
Derrick head slewing guy fitting
Derrick heel fitting
Gooseneck
Derrick heel cargo lead block bearing
Span trunnion
Cargo winch
Cargo rope or hoisting rope or lifting rope
Derrick heel cargo lead block
Cargo rope guide
Derrick head cargo block
Thimble
Shackle
Swivel
Cargo hook

11. Derricks - Masts Span chain Topping triangle plate
Declutchable cargo winch warping end
Topping rope
Fixed span rope
Mast head span block
Deck topping lead block
Slewing guy tackles
Slewing winch
Slewing guy rope
Lower slewing guy block
Upper slewing guy block
Becket
Slewing guy pendants
Thimble
Deck eyeplates

12. Crane & Gantry Crane Hull structure, above & below deck
Pedestal & gantries
Jib & turret
Slewing ring
Gantry crane bogies
Rails & padeyes

13. Crane & Gantry Crane Crane pedestal Bolted connection
Fixed lower structure
Superstructure or crane body
Slewing ring
Driving cab
Jib or crane boom
Jib heel pin or boom heel pin
Luffing cylinder
Cargo rope or hoisting rope or lifting rope
Jib head built-in cargo sheaves
Crane top built-in cargo sheaves
Cargo winch
Rope terminal
Shackle
Swivel
Link
Cargo hook

14. Crane & Gantry Crane
Crane Slewing Ring. Showing gear ring, fitted bots & slewing motor postions

15. Loose Gear Blocks, sheaves & pulleys Hooks, rings, chains & shackles
Triangular plates
Wire ropes, ropes & slings

16. Winches Foundations & holding-down bolts
Drums, end flanges, shafts & bearings
Reduction gears
Brakes & linings
Locking devices, pawls & ratchets

17. Cranes Operational test Control devices & brakes
Applicable circuits (electric, hydraulic & air)
Limit switches, load indicators & emergency stops
Platforms, guards, ladders & guard rails
Operator cabins