1. Poland Germany Austria Slovakia Estabilished 1878

2. 1878: foundation of company under name „Theodor Pohl Porzellanfabrik Schatzlar“, hand made figure porcelain 1921 – 1926: dynamic development of company, sanitary porcelain production started 1952: company transfered to state ownership belong to company „Elektroporcelan Louny“ 1964: foundry ceramic production started (Pyrostat mass) 1994: foundation of company KERAMTECH (company privatized by management) 2010: last change of ownership : - Mrs. Gabrtova – chief executive - Mrs. Polakova – production manager - Mr. Lev P. – production dpt. - Mr. Lev O. – partial ownership History of company

3. -total employees: 127 -total turnover in EUR: 4,25 mio -total production in pieces: 24,8 mio - pcs of filters: 18,0 mio - pcs of filters: 18,0 mio - pcs of strainer cores: 2,0 mio - pcs of strainer cores: 2,0 mio - pcs of electro-porcelain parts: 3,7 mio - pcs of electro-porcelain parts: 3,7 mio - pcs of heating ceramics parts: 1,2 mio - pcs of heating ceramics parts: 1,2 mio 2014 in numbers

4. Production range in 2014 80,5% foundry ceramics 14,5% lamp holders 0,5% final products4,5% heating ceramics

7.  PYROSTAT-KER 510 - grey and nodural iron and bronze casting, heating ceramic parts - refractorines upto 1500°C  RK 5 - carbon and low alloy steel castings, heating ceramic parts - refractorines up to 1740°C.  PYRAL 15 - especially for aluminium casting - refractorines up to 1500°C, lower shockproof  PORCELAIN - electro-porcelain parts - refractorines upto 1500°C RANGE OF CERAMIC MASSES

8. FOUNDRY CERAMIC - 3 automatic pressing lines PORCELAIN PARTS - 3 automatic pressing lines 30 single (semiautomatic) pressing machines FOUNDRY CERAMIC - 3 automatic pressing lines PORCELAIN PARTS - 3 automatic pressing lines 30 single (semiautomatic) pressing machines 2014 production facilities

9. 1 tunnel kiln (continual burning process) 1 tunnel kiln (continual burning process) 3 box kilns (discontinual burning process) 3 box kilns (discontinual burning process) 2014 burning facilities

10. 1.raw material - input control 2.mass preparing - in-process control 3.pressing - in-process control 4.drying - in-process control 5.cleaning process - in-process control 6.burnning process - in-process control 7.sorting/assembly – output control 8.stock – screening control 8 steps of quality control

11. Laboratory - 3D Metrology

12. 100% visual and sound check-out

13. Certification: BS EN ISO 9001 BS EN ISO 14001 BS EN ISO 9001 BS EN ISO 14001

14. Stock/logistic

15. World of Filtration