1. Raspberry Pi Programming Mitch Neilsen (neilsen@k-state.edu) http://www.cis.ksu.edu/~neilsen/RaspberryPi/

2. Raspberry Pi http://www.raspberrypi.org/quick-start-guide http://www.raspberrypi.org/quick-start-guide

3. Raspberry Pi Quick Start Guide

4. Raspberry Pi Forum

5. The MagPi http://themagpi.com

6. Raspberry Pi IV Beginners http://pibeginners.com http://pibeginners.com

8. Google Coder http://googlecreativelab.github.io/coder/ http://googlecreativelab.github.io/coder/

9. Google Coder http://googlecreativelab.github.io/coder/ http://googlecreativelab.github.io/coder/

10. Google Coder http://googlecreativelab.github.io/coder/ http://googlecreativelab.github.io/coder/ coder01.local, coder02.local, …

11. Local Logistics 1.Connect Ethernet cable and plug Raspberry Pi in to an Ethernet port near a large screen TV. 2.Connect HDMI cable. 3.Connect AC Adapter to power it up – mini USB connector. 4.Write down the IP address dynamically assigned to your Raspberry Pi; e.g., “My IP address is 129.130.11.235”. 5.Use a lab machine to connect to your Pi via a browser such as Google Chrome; e.g., http://129.130.11.235/.http://129.130.11.235/ 6.Add a Security Exception when the warning is displayed. 7.Set your initial password, and get to work.

12. Add Security Exception and Get To Work