2. Threading the Sewing Machine

3. Place the Spool of Thread on the Spool Pin

4. The Needle Thread Tension Push down on the metal loop and position into the metal fork Lay the thread behind the metal foot

5. The Needle Thread Tension Thread goes in this slot

6. Thread Guide Open at the bottom

7. Take up Lever Thread through the take up lever

8. 2 Thread Guides 1 2

9. Needle Front to back

10. Bobbin Bobbin rotates counter clock- wise

11. Bobbin Place the thread in the slot and into channel

12. Raising the Bobbin Thread Hold the end of the spool thread and turn the hand wheel one revolution

13. Grab the Loop and pull both threads to the back

14. The Threaded Machine