1. 5.1 VERSION New Features 03/09/2014

2. List of new features 03/09/2014 The new features introduced with the DigiEye software version 5.1 are: 1. DUAL-LAN DUAL-LAN 2. 802.1x 802.1x 3. VIDEO PROCESSING MULTIBRAND VIDEO PROCESSING MULTIBRAND 4. IP CAMERAS CONFIGURATION IP CAMERAS CONFIGURATION 5. ADVANCED DIGITAL SIGNAGE ADVANCED DIGITAL SIGNAGE 6. ADVANCED STREAMFLEX ADVANCED STREAMFLEX

3. New advanced modes that offer the following advantages: MORE PERFORMANCE up to 2 Gb / s, MORE SECURITY thanks to the separation of the networks dedicated to the cameras and centralization, MORE RELIABILITY in case of malfunction of the network equipment (high-availability) Advanced management of the 2 Ethernet network interfaces available on the DigiEye 03/09/2014 NETWORK CAMERAS CENTRALE DI VIDEOSORVEGLIANZA DUAL-LAN Dual network interface NETWORK CAMERAS PC / MOBILE DIGIEYE 2 Gb/s IP Network VIDEO SURVEILLANCE CENTER LAN1 LAN2

4. DUAL-LAN Dual network interface 03/09/2014 ■ PERFORMANCE - LOAD BALANCE mode that optimally adjusts the flow of data on the 2 network interfaces that are used simultaneously - effectively bringing the network bandwidth available on DigiEye to 2 Gb / s. ■ SECURITY - INDEPENDENT NETWORK mode that allows to manage two separate IP networks. This mode is typically needed to separate the network of IP cameras, which generate a high data traffic, from the company network used to access to the DigiEye system(s); the level of security of the whole system is therefore highly increased. ■ RELIABILITY - ACTIVE BACKUP mode that allows to increase the level of reliability in case of malfunctioning of the network infrastructure. In case of failure of the primary network, the DigiEye connectivity can be ensured by connecting the system also to a secondary network, by using 2 ports of the same network switch or by connecting the DigiEye to 2 separate switches.

5. The 802.1x standard allows that each port physically connected to the network has to be authenticated by a dedicated server (typically a RADIUS server), eliminating the possibility of unauthorized access by physical connection to the network. The IEEE 802.1x standard enables Digieye to access networks protected by this security service. 03/09/2014 NETWORK CAMERAS CENTRALE DI VIDEOSORVEGLIANZA IEEE 802.1x Standard for network authentication DIGIEYE (802.1x Supplicant) NETWORK SWITCH (802.1x Authenticator) RADIUS Server (802.1x Authentication server) Request Authorization Request

6. IEEE 802.1x Standard for network authentication 03/09/2014 ■ This mechanism requires that the DigiEye (Supplicant) is connected to the network switch (Authenticator) with support for 802.1x and that it is configured to authenticate the DigiEye via a dedicated server (Authentication server). ■ The 802.1x authentication can be performed individually for each network port on the DigiEye. DIGIEYE (802.1x Supplicant) NETWORK SWITCH (802.1x Authenticator) RADIUS Server (802.1x Authentication server) Request Authorization Request

7. The DigiEye now allows to process the IP video in the same way as the analog video, using all the advanced features of video analysis that, prior to this version, were available only for analog video. MOTION DETECTION MULTI-ZONE, up to 6 distinct areas of motion detection can be defined for each camera image and, in the case of PTZ cameras, for each defined preset. MOTION DIRECTIONAL detecting the direction of movement of an object in the image PERMANENCE CONTROL able to identify the presence of abandoned objects in the scene. VIDEO TAMPERING alarm in the event that the camera image is blinded / blurred / out-of-focus / out-of-position or in case of absence of signal. Video Processing: IP video as analog video. Functions available for all IP cameras regardless of brand / model. VIDEO PROCESSING MULTIBRAND Support for multi-vendor IP cameras 03/09/2014

8. VIDEO PROCESSING MULTIBRAND Support for multi-vendor IP cameras MULTI-BRAND because the above functions are available for all IP cameras (*), regardless of the brand / model. * IP cameras non-motorized with RTSP protocol and H.264 video encoding 03/09/2014

9. Configuration of the SYAC▪TB IP cameras’ parameters through DigiEye IP CAMERAS CONFIGURATION IP video streaming parameters 03/09/2014 No need anymore to access to the configuration through a PC: the parameters of the SYAC▪TB IP cameras (series N1) can now be configured directly from the DigiEye

10. IP CAMERAS CONFIGURATION IP video streaming parameters 03/09/2014 The configuration capabilities using STREAM 1 are related to the parameters of video streaming: ■ VIDEO RESOLUTION ■ CODIFICATION TYPE ■ BITRATE/FRAMERATE STREAM 2 will be shortly able to enhance the video IP recording / viewing / analysis / transcoding functions

11. Titling with information updated in real time View video in emergency situations More storage for movies and time schedule programming Digital Signage advanced options are now available NETWORK CAMERAS DIGITAL SIGNAGE Advanced functions News update : UK, Prime minister declaresALERT : FIRE ALARM - GO TO NEAREST EXIT 03/09/2014

12. DIGITAL SIGNAGE Advanced functions 03/09/2014 ■ Titling with information updated in real time: Possibility of titling the video with scrolling text (crawl) which is obtained from web services, also in local networking, type RSS-feed. It is therefore possible to display updated information in real time (news, weather,...) along with the Digital Signage programmed video footage ■ View video in emergency situations: Ability to use the Digital Signage as an alarm/assistance system in case of emergency situations: for example, in case of a fire alarm, DigiEye can display on a video monitor the evacuation procedure, the escape paths, etc ■ More storage for films and possibility of time scheduling: The storage space for films has been increased to 8GB and it is now possible to time schedule the Digital Signage according to each slot/alarm defined in DigiEye

13. Proprietary function that allows to adjust the IP (also megapixels) video for transmission even on narrow band networks ADVANCED STREAMFLEX Scheduler settings NETWORK CAMERAS DIGIEYE IP Network VIDEO SURVEILLANCE CENTER DAY MODE (08-20) Max.1 Mbit/s MOBILE NETWORK CAMERAS DIGIEYE IP Network VIDEO SURVEILLANCE CENTER NIGHT MODE (20-08) Unlimited Mobile 03/09/2014

14. ADVANCED STREAMFLEX Scheduler settings 03/09/2014 ■ The DigiEye software 5.1 version further enhances this functionality by allowing to set all the parameters that control the connectivity and bandwidth for each time or alarm phase defined on the DigiEye. ■ For example, DigiEye can be set so that the connectivity during the day is limited to 1 Mbit/s while during the night there is no restriction; or so that it allows connections only from the Video Surveillance Center and not from mobile devices. Thanks to the Streamflex function, DigiEye is able to adjust the IP video (also megapixel) for transmission even on low band networks

15. Thank you for your attention SYAC▪TB TECHBOARD Security Division Area Science Park Padriciano, 99 34149 Trieste ITALY Tel. 059 289899 sales.syac@techboard.it www.syac-tb.com TECHBOARD Via Della Scienza, 50 41100 Modena ITALY Tel. 059 289811 techboard@techboard.it www.techboard.it 03/09/2014