Download presentation
Published byLauren Oliver Modified over 9 years ago
1
TOPIC : Board-Level and System-Level DFT Approaches
UNIT 4 : Design for testability Module 4.4 Board – level DFT approach TOPIC : Board-Level and System-Level DFT Approaches
2
Board level DFT techniques
By a system we mean a collection of modules, such as PCBs, which consist of collections of ICs. Many of the ad hoc DFT techniques referred to earlier such as scan can also be applied to the board level. Primary system-level DFT approaches use existing functional Busses, scan paths, and boundary scan.
3
System-Level Busses This DFT approach makes use of a module's or system's functional bus to control and observe signals during functional level testing. A test and for maintenance processor, such as the ATE, appears as another element attached to the system's busses. During testing, the ATE can take control of the system busses and test the system.
4
System-level test using system bus
5
System-Level Scan Paths
Scan can be extended to the board and system levels. The scan path of each chip on a board is interconnected in a daisy chain fashion to create one long scan path on each board. The boards all share a common Sin, N/T and CLK input. Their Sout lines are wired-OR together. The testing of such a system is under the control of a system-maintaince processor, which selects that board to be attached to the board-level scan line Sout as shown in next slide.
6
Scan applied to the system level
Common Sin, N’/T and CLK
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.