1. Extracting Drawings - DEMO
Although most demos are implemented with word documents, this demo employs slides so that more details can be shown to the students as the drawing is constructed.
Rev: , AJP
Extracting Drawings

2. Formal Drawings Formal Drawing Components:
Definition: Detailed multi-view representations of a finished part
Formal Drawing Components:
Extracted Drawings
Extracted Views
Detailed Features
Title Block
Dimensions
Size and Type of Features
Rev: , AJP
Extracting Drawings

3. Extracted Views
Purpose: create 2D engineering drawings from solid models
Top View
Isometric
View
Part File to Drawing File
Place Base View
Project Top, Right
Isometric View
Base View
Right View
Part File to Drawing File
Place Base View
Project Top, Right, and Isometric Views
Rev: , AJP
Extracting Drawings

4. Detailed Features Automatically Aligned Features Hidden Lines
Orthographic Views
NOT on Isometric Views (unless necessary)
Circular Features
Centerlines
Center Marks
Rev: , AJP
Extracting Drawings

5. Title Block Specific to Company Part Name Scale Units Author Date
Any Other Necessary Information
Rev: , AJP
Extracting Drawings

6. The OSU Title Block Template
Drawing Title
Drawn By
Scale
Instructor
Hour
Units
Seat
Drawing No. Date
TOP ORTHO
ISOMETRIC
ISOMETRIC SCALE NOTE
RIGHT SIDE ORTHO
FRONT ORTHO
Rev: , AJP
Extracting Drawings

7. Load Files from SolidWork-7 EEIC website
Place the following files in your SolidWorks folder:
Extracting_Drawing_Demo_Part.SLDPRT
Extracting_Drawing_Demo_Drawing.SLDDRW
The following slides are intended to be used as an Instructor led demonstration with the students replicating the shown operations. Note that the drawing created in this Demo will be used in the following Dimensioning Demo.
INSTRUCTOR NOTE: If any student does not successfully complete the extracted drawing in this demo, there is a completed extracted drawing available from the Instructors Demo – Dimensioning Part 1 on SolidWorks-8 EEIC website.
Rev: RCB
Extracting Drawings

8. SolidWorks: Drawing File
Open the Extracting_Drawing_Demo_Drawing.SLDDRW and use the “Model View” button to place a base view.
Extracting_Drawing_Demo_Part
Select the correct part file from open documents or using the “Browse..” button to select closed files
Rev: RCB
Extracting Drawings

9. SolidWorks: Model View Options
Display hidden lines for orthographic views
Choose base view (usually front view)
Select "Use custom scale" and choose appropriate scale (1:2 for this demo)
Place View by left clicking correct location
Place corresponding views by moving the mouse cursor in the desired direction
Rev: RCB
Extracting Drawings

10. SolidWorks: Extracted Views
Insert base view by left clicking once at the correct location
Place projected views by left clicking in the appropriate directions and spacing
Press “Esc” when finished
SolidWorks will automatically be ready to place projected views originating from the base view
Rev: RCB
Extracting Drawings

11. SolidWorks: Changing Options
The size of all the views can be changed by selecting the base view and changing the scale
The isometric view can be selected in order to change it’s display properties to a solid part without edge lines
A scale note can be added using Annotation and A Note
The location of the views can also be adjusted by selecting the views and dragging them to the correct location. Remember that the top and right views must line up with the front view.
Rev: RCB
Extracting Drawings

12. SolidWorks: Circular Features
The current version of SolidWorks adds Center Marks automatically . If additional Center Marks are required, they can be added using the Center Mark option
Centerlines must be added to define circular features in Orthographic views by sequentially clicking on the vertical hidden lines defining the holes.
Rev: RCB
Extracting Drawings

13. Sometimes SolidWorks does not do Centerlines very well!
Click on Centerline
Left click on blue square and pull it down
Adjust blue square up release
Rev: RCB
Extracting Drawings

14. SolidWorks: Title Block
Finished Drawing
Right click ON Sheet Format1 (or anywhere on the drawing) and select “Edit Sheet Format”
Right click and select Edit Sheet or left click on icon in upper right screen to restore the drawing
Double click item to edit Title Block Text
Click on the RED X to accept the text and hit Esc key. Complete all blocks.
Rev: RCB
Extracting Drawings

15. Save the Extracted Part Drawing for use within the following Dimensioning Demo
If the student has successfully completed the Extracting Demo, use File Save As and name the file:
My_Dimensioning_Demo_Drawing
If the Extraction Demo drawing is incomplete, a completed version is available within the Dimensioning Demo on the SW_08 page on the EEIC website. (Dimensioning_Demo_Drawing.SLDDRW).
Rev: , AJP
Extracting Drawings

16. Extracting Drawings Wrap Up
Homework Assignment
Problem 6.4 (qq)
Model part and create 2D Drawings with all necessary formatting (to be used in next class)
Extracted Views
Part file to drawing file
Detailed Features
Aligned
Hidden
Circular
Title Block
Author
Units
Scale
Rev: , AJP
Extracting Drawings

17. (Hint: Centermarks and Centerlines)
In-Class Assignment
Open this part file and use it to extract 2D drawings. Add all necessary formatting.
(Hint: Centermarks and Centerlines)
Rev: , AJP
Extracting Drawings

18. End of Presentation
The following slide provides an alternative method for retrieving the correct OSU drawing template. The recommended method is to download the Drawing_Template.SLDDRW from the SolidWorks-7 EEIC website page as illustrated on slide 6.
Rev: RCB
Extracting Drawings

19. SolidWorks: OSU Title Block
The OSU Title Block is already loaded on the First Year Engineering Computers and is the same as what is in the EEIC Templates folder on the course drive
To locate uncheck the “Only show standard formats” box and scroll to the bottom of the list
Rev: , AJP
Extracting Drawings