1. Wireless Networks Lab - Sensor 2007/12/05

2. yctseng: 2 Objective Install sample code and study the procedure of sample code and be familiar with controlling the sensor module. Use sensor module of FT6251 (as end device) to collect data of your surroundings and report to FT6250 (as coordinator) through network.

3. yctseng: 3 Sample code All the functions that you can use to control sensor are defined in C:\Jennic\cygwin\jennic\SDK\Platform\Fontal\EVKr2\Source\HtsDriver.c

4. yctseng: 4 Sample code

5. yctseng: 5 Lab Periodically report sensing data

6. yctseng: 6 Lab Integrate networking and sensing  Let end devices could report sensing data to coordinator periodically.  Set MAX and MIN warning conditions.  Send out a warning message to coordinator timely and take alert action.  Ex: Temperature warning - LED 0 blinks Humidity warning - LED 1 blinks  Coordinator show the received information on either HyperTerminal or your own UI through UART.