1. 1 How to Start Up CCStudio 3 DSP LAB T.A.:

2. 2 Device Setup Double-click “ Setup CCStudio3 ” on desktop, and you will see the above dialog.

3. 3 Choose Your Device If you want to use the simulator. Select “ C6416 Device Cycle Accurate Simulator,Little Endian ” If you want to use the DSK board. Select “ C6416 V1.1 DSK ”.

4. 4 Click “ import ”

5. 5 Click “ Save and Quit ”

6. 6 Click “ Yes ” CCS3 will then be started up.

7. 7 New Project

8. 8 Add files to project

9. 9 3 files needed to be added Source file (.c or.asm) ;.cmd ;.lib

10. 10 Where are them? You need to write your own source code. Find library in the following path: C:\CCStudio\c6000\cgtools\lib \rts6400.lib Find cmd file in any appropriate example: C:\CCStudio\c6000\cgtools\lib\lnk.cmd

11. 11 Rebuild Projects To compile and link all the files

12. 12 Load Program

13. 13 Debug / Run (F5)