1. Rotational Molding Blow Molding Thermoforming Chapter 6.4,5,8

2. Rotational Molding

3. THE ROTATIONAL MOLDING PROCESS http://www.ferryindustries.com/rot_mold.html

4. class.et.byu.edu/.../ rotationalmolding.htm

11. Blow Molding

12. www.paarloplastics.com/ public/blowmolding.cfm

13. www.devco-design.com/ bl-mold.htm

14. www.riken.go.jp/lab-www/ mat-fab/blow/PETBlow.html

15. www.fluent.com/software/ polyflow/blow.htm Extrusion Blow Molding Animation (from Fluent, CFD software)

16. Blow Molding Animation (from Fluent, CFD software) www.fluent.com/software/ polyflow/blow.htm

20. Thermoforming

22. Vacuum Forming Vacuum Forming is accomplished by heating the plastic sheet until it is pliable enough to be vacuumed either into a female mold or over a male mold. www.pmwproducts.com/ thermoforming.html

23. www.fluent.com/.../ thermoforming.htm

24. Pressure Forming Pressure Forming is nothing more than Vacuum Forming with pressure assist to the forming process to enable crisper detail and sharper features. Pressure Forming utilizes pressurized air to push the heated sheet into the cavity. Pressure formed parts can resemble the detail of injection molded parts at a fraction of the tooling cost. www.pmwproducts.com/ thermoforming.html