1. Control System for Smart House Mid Semester Presentation Students Yossi Lempert Albert Achtenberg Instructor Konstantin Sinyuk

2. Project Description To create a remote control and monitoring system for an existing “Home Wireless Control” platform Two kind of remote control: –On Ipaq via Bluetooth –On PC via web access

3. Block Diagram End point Access Point Access Point Controller

4. Access Point CAN Connection To other Access Points CAN Connection To other Access Points CAN controller UARTI2C Phillips BT UnitDB of End Points on E 2 PROM PIC18F458 UART PIC18F452 Phillips Bluetooth Unit UART IPAQ 3870 External Bluetooth Unit USB PC USB to CAN adapter End pointIpaq ControllerPC Controller Bluetooth CAN Block Diagram (cont.)

5. Design Tools Microchip PIC18F452/8 on PICDEM2 boards MCP 2551 CAN transceivers MCC18 compiler using MPLab IDE Philips Bluetooth units CAN2USB Protocols Used: –CAN, Bluetooth, HWC Protocol

6. Components End Point –Microchip PIC18F452 microcontroller 40MHz operating frequency 32Kb Internal Memory Philips Bluetooth unit attached via UART –Frequencies The Bluetooth unit’s maximum transfer rate is 750KB/sec The maximum transfer rate between the PIC and the Bluetooth unit is 115KB/sec Access Point –Microchip PIC18F458 microcontroller All of the above CAN 2.0B peripheral interface –Frequencies The CAN connection maximum transfer rate is 1MB/sec

7. Components Cont. Controllers –HP Ipaq 3870 External Bluetooth module –Connection via serial port Windows CE 3.xx –PC USB to CAN adapter Web interface

8. Ipaq GUI Web Link Web Interface BT ModuleCAN Module HWC Protocol Link Logic Application Design Ipaq Module PC Module

9. Project modules Ipaq Module –Using Smart Remote Controller Project by Pavel Vilk and Piotr Drubetskoy PC Module –Using Access Point simulator on CAN2USB from HWC Project by Ehud Ravitz and Lee Blum

10. Smart Remote Controller Project by Pavel Vilk and Piotr Drubetskoy Implementation of a system which includes a single Remote Controller capable of controlling several devices in different rooms via Access Points, connected via LAN. The Remote Controller and the Access Point are implemented on a PDA with a Blue Tooth link and CE OS. The Access Point manages a piconet of devices implemented as black boxes on a PC.

11. HWC Project by Ehud Ravitz and Lee Blum Aim of the project Create a cheap wireless control network on household appliances. –Create Bluetooth connection between an Access point and an End Point. –Create CAN connection between two Access Points.

12. Technologies Ipaq Bluetooth Stack –Ipaq 3870 has no free Bluetooth stack development kit. –Upgrading to Windows Mobile 2003 adds a native Microsoft BT stack that is not supported by the OS. ZigBee –Expensive development kit –Low Power –Small transfer rate

13. What have been done so far? Learning to work with the MPLab and the PIC Development Kit Learning the Bluetooth Protocol Learning the CAN Protocol System and application design Learning to operate Home Wireless Control project

14. Schedule 10.01.2005 – Finish employing HWC project 10.02.2005 – Build the IPAQ controller 01.03.2005 – Build the PC controller 15.03.2005 – Final report and presentation