2. Extruded Scintillating Tile Thickness Measurements A Preliminary Set of Measurements of the Extruded Scintillating Tiles from the NICADD Extruder

3. What was Measured  The edges of the tiles  Started in one corner and moved in 20cm increments down one side.  Measured the center of one edge  Continued down the opposite side in the same way as the first side  The center of the other edge was measured  14 total measurements for each tile

4. A “Picture” of the measurements  Black dots represent measurement points  Measurements start at one corner, and proceeded along the long side of the tile.

5. Excel File of Measurements  The excel file attached has all of the raw data and graphs of each side for each tile  One graph has the two sides plotted for each individual tile (the long sides of the tile)  Graphs have each side plotted and labeled  Excel file name: Extrude