Presentation is loading. Please wait.

Presentation is loading. Please wait.

How to Disassemble and M16 By: Anthony Johnson. Parts List Left and right hand guards Upper and Lower Receiver Charging Handle Bolt Carrier Retaining.

Published by Modified over 9 years ago

Similar presentations

Presentation on theme: "How to Disassemble and M16 By: Anthony Johnson. Parts List Left and right hand guards Upper and Lower Receiver Charging Handle Bolt Carrier Retaining."— Presentation transcript:

1 How to Disassemble and M16 By: Anthony Johnson

2 Parts List Left and right hand guards Upper and Lower Receiver Charging Handle Bolt Carrier Retaining Pin Firing Pin Bolt Cam Pin Bolt Assembly Buffer Buffer Spring

3 Step 1 Remove the left and right hand guards

4 Step 2 Push the upper and lower receiver pin

5 Step 3 Separate Upper and Lower Receiver

6 Step 4 Pull Back Charging Handle

7 Step 5 Remove Bolt Carrier

8 Step 6 Remove Charging Handle

9 Step 7 Remove Retaining Pin

10 Step 8 Remove Firing Pin

11 Step 9 Remove Bolt Cam Pin

12 Step 10 Remove Bolt Assembly

13 Step 11 Remove Buffer and Buffer Spring

Download ppt "How to Disassemble and M16 By: Anthony Johnson. Parts List Left and right hand guards Upper and Lower Receiver Charging Handle Bolt Carrier Retaining."

Similar presentations

RP-500 ½- 1. Modification Overview Production of the RP500 began in 2007 and is current. Production of the RP500 began in 2007 and is current.

RP-500 ½- 1. Modification Overview Production of the RP500 began in 2007 and is current. Production of the RP500 began in 2007 and is current.
RP4A 2½ – 6. Modification Overview Production of the RP4A series began in 2008. Production of the RP4A series began in 2008. A Lead free version (4ALF)

RP4A 2½ – 6. Modification Overview Production of the RP4A series began in Production of the RP4A series began in A Lead free version (4ALF)
RP4AN 21/2 – 6. Modification Overview Production of the RP4AN series began in 2008. Production of the RP4AN series began in 2008. The 4AN indicates an.

RP4AN 21/2 – 6. Modification Overview Production of the RP4AN series began in Production of the RP4AN series began in The 4AN indicates an.
WEAPONS FAMILIARIZATION BRIEF

WEAPONS FAMILIARIZATION BRIEF
McDonald’s Vertical Toaster. View inside cabinet Relays Drive Train Motor with fan in place. Plate heater.

McDonald’s Vertical Toaster. View inside cabinet Relays Drive Train Motor with fan in place. Plate heater.
Disassemble, Assemble and Perform a Function Check on the M16/M4

Disassemble, Assemble and Perform a Function Check on the M16/M4
BASIC RIFLE MARKSMANSHIP

BASIC RIFLE MARKSMANSHIP
BASIC RIFLE MARKSMANSHIP

BASIC RIFLE MARKSMANSHIP
MAINTENANCE OF THE SERVICE RIFLE OVERVIEW Cleaning gear Maintenance Function check User serviceability inspection.

MAINTENANCE OF THE SERVICE RIFLE OVERVIEW Cleaning gear Maintenance Function check User serviceability inspection.
INTRODUCTION TO THE SERVICE RIFLE AND MAINTENANCE 1.

INTRODUCTION TO THE SERVICE RIFLE AND MAINTENANCE 1.
Weapons Safety Rules 1) Treat every weapon as if it were loaded. 2) Never point a weapon at anything you do not intend to shoot. 3) Keep you finger straight.

Weapons Safety Rules 1) Treat every weapon as if it were loaded. 2) Never point a weapon at anything you do not intend to shoot. 3) Keep you finger straight.
WPN 1003 INTRODUCTION TO WEAPONS MAINTENANCE. WPN 1003 INTRODUCTION TO WEAPONS MAINTENANCE.

WPN 1003 INTRODUCTION TO WEAPONS MAINTENANCE. WPN 1003 INTRODUCTION TO WEAPONS MAINTENANCE.
860 21/2”-10”. Modification Overview  Production of the 2½” – 10 sizes began in 1993.  Lead free version (LF860) was introduced in 2011. Parts do not.

860 21/2”-10”. Modification Overview  Production of the 2½” – 10 sizes began in  Lead free version (LF860) was introduced in Parts do not.
L2000 Technical Training 6. Assemble/Disassemble.

L2000 Technical Training 6. Assemble/Disassemble.
M 249 SAW.

M 249 SAW.
M16A2 SERVICE RIFLE Lesson Purpose The purpose of this period of instruction is to introduce you to the M19A2 Rifle and the care and cleaning of this.

M16A2 SERVICE RIFLE Lesson Purpose The purpose of this period of instruction is to introduce you to the M19A2 Rifle and the care and cleaning of this.
M16-A2 fired with obstructed bore 5 May 01. View from rear of M16, notice missing parts of upper receiver, extensive damage to chamber area, bulged lower.

M16-A2 fired with obstructed bore 5 May 01. View from rear of M16, notice missing parts of upper receiver, extensive damage to chamber area, bulged lower.
McPherson Strut Service and Diagnosis

McPherson Strut Service and Diagnosis
825, 825Y, 825YD 21/2”-10”. Modification Overview  825- (1975-1988) Cast iron body- Threaded in seats- Internal check parts are epoxy coated iron. Old.

825, 825Y, 825YD 21/2”-10”. Modification Overview  825- ( ) Cast iron body- Threaded in seats- Internal check parts are epoxy coated iron. Old.
975DA 2½”-10”. Modification Overview  Production of the 975DA began in 1993 and was discontinued in 2004.  The 975DA uses a ¾” 975XL for the bypass.

975DA 2½”-10”. Modification Overview  Production of the 975DA began in 1993 and was discontinued in  The 975DA uses a ¾” 975XL for the bypass.

Similar presentations

Ads by Google