1. Christelle Roy - Subatech 1 EMCal – France StatusCERN-020707 Since the Scientific Council

2. design EMCal design participation Mechanics : completed  Mechanical architecture of StripModules and SuperModules : completed completed  SuperModules Crates : completed (  pict.) in progress  StrongBacks : in progress completed  Interfaces SuperModules – CalFrame (rails + crates) : completed completed  Insertion Tooling : completed completed  StripModules handling and tooling : completed completed  Electronics/mechanics interfaces : completed Electronics : in progress  T-cards + IPCB + GTL bus : in progress Request from Electronics/Daq pool of Subatech

3. SuperModule Crate As designed As machined

4. realization EMCal realization participation Mechanics : completed  SuperModules – CalFrame interfaces (rails and crates) : completed in progress  StrongBacks manufacturer consulting : in progress order ready to be sent  Insertion tooling : order ready to be sent completed  Installation of the rails on the CalFrame : completed …last week  Load test completed  Writing of EMCal 3D-Model : completed + constant upgrade …coming soon…  Tests at CERN in October : 4/5 persons available  Module assembly (288)  StripModules assembly (24)

5. Calframe : Preparation of load test Load test finished week 22, deflections conform to FEA calculations

7. CalFrame Installation of cables trays in SXL2 (on the way)

8. LPSC activities 1/ Supermodule assembly (see J.F. Muraz's talk) - Hall removal - Assembly tools 2/ EMCal Global trigger (see O. Bourrion's talk) - STU design - Test TRU/STU link 3/ Simulation for cosmics calibration (see C. Furget's talk)