1. Chapter 7 Memory Management
Basic requirements of Memory Management
Memory Partitioning
Paging
Segmentation

2. Memory Management
A program must be loaded into main memory to be executed.
The principal operation of memory management is to bring processes into main memory for execution by the processor.

3. Memory Management
Memory needs to be allocated to ensure a reasonable supply of ready processes to consume available processor time
Otherwise, for much of the time all of the processes will be waiting for I/O and the processor will be idle.

4. The need for memory management
Memory is cheap today, and getting cheaper
But applications are demanding more and more memory, there is never enough!
Memory Management involves swapping blocks of data from secondary storage.
Memory I/O is slow compared to CPU
The OS must cleverly time the swapping to maximise the CPU’s efficiency

5. Memory Management Requirements
Relocation
Protection
Sharing
Logical organisation
Physical organisation

6. Relocation
The programmer does not know where the program will be placed in memory when it is executed,
it may be swapped to disk and return to main memory at a different location (relocated)
But, OS knows because it is managing memory and is responsible for bringing this process into main memory

7. Relocation Addressing
The processor and OS must be able to translate the memory references found in the code of the program into actual physical memory addresses (to be discussed)

8. Protection
Processes should not be able to reference memory locations in another process without permission.
Impossible to check absolute addresses at compile time because the location of a program in main memory is unpredictable.
Must be checked at run time by the processor.

9. Sharing Allow several processes to access the same portion of memory
Better to allow each process executing the same program access to the same copy of the program rather than have their own separate copy
Processes that are cooperating on some task may need to share access to the same data structure

10. Logical Organization Memory is organized linearly (usually)
In contrast, programs are organized into modules
Modules can be written and compiled independently
Different degrees of protection can be given to different modules (read-only, execute-only)
Modules can be shared among processes
Segmentation helps here

11. Physical Organization
Cannot leave the programmer with the responsibility to manage memory
Memory available for a program plus its data may be insufficient
Programmer does not know how much space will be available or where the space will be
The task of moving information between different levels of memory should be a system responsibility

12. Partitioning An early method of managing memory
Pre-virtual memory
Not used much now
But, it will clarify the later discussion of virtual memory if we look first at partitioning
Virtual Memory has evolved from the partitioning methods

13. Types of Partitioning Fixed Partitioning Dynamic Partitioning
Simple Paging
Simple Segmentation
Virtual Memory Paging
Virtual Memory Segmentation

14. Fixed Partitioning Partition memory into regions with fixed boundaries
Equal-size partitions
Any process whose size is less than or equal to the partition size can be loaded into an available partition

15. Fixed Partitioning Problems
A program may be too big to fit into a partition
Main memory use is inefficient.
Any program, no matter how small, occupies an entire partition.
This is results in internal fragmentation (wasted space internal to a partition).

16. Fixed Partitioning Solution – Unequal Size Partitions
Lessen both problems
But doesn’t solve completely
Larger programs can be accommodated
Smaller programs can be placed in smaller partitions, reducing internal fragmentation

17. Fixed Partitioning Placement Algorithm
Equal-size
Placement is trivial: a process can be loaded into any available partition
Unequal-size
Can assign each process to the smallest partition within which it will fit
Queue for each partition
 Processes are assigned in such a way as to minimize wasted memory within a partition

18. Fixed Partitioning Placement Algorithm
It is possible that a partition is unused even though some smaller process could have been assigned to it
Select the smallest available partition that will hold the process

19. Fixed Partitioning Remaining Problems
The number of active processes is limited by the system
i.e., limited by the pre-determined number of partitions
Partition sizes are preset at system generation time, small jobs will not use space efficiently

20. Dynamic Partitioning
Dynamic partitioning can overcome some of the difficulties with fixed partitioning
Partitions are of variable length and number
Process is allocated exactly as much memory as required

21. Dynamic Partitioning Example
External Fragmentation
Memory external to all processes is fragmented and memory utilization declines
Can resolve using compaction
OS moves processes so that they are contiguous
 Time consuming and wastes CPU time
OS (8M) P2
(14M) P1
(20M)
Empty (6M)
P4(8M) P2
(14M)
Empty (56M)
Empty (6M) P3
(18M)
Empty (4M)

22. Dynamic Partitioning
Operating system must decide which free block to allocate to a process
Best-fit algorithm
Chooses the block that is closest in size to the request
 Worst performer overall
Since smallest block is found for a process, the fragment left behind is too small to satisfy other requests
Memory compaction must be done more often

23. Dynamic Partitioning First-fit algorithm
Scans memory from the beginning and chooses the first available block that is large enough
 Simplest and fastest
 May have many process loaded in the front end of memory such that small free partitions must be searched over on each subsequent pass

24. Dynamic Partitioning Next-fit
Scans memory from the location of the last placement
 More often allocate a free block at the end of memory where the largest block is found
The largest block of free memory is quickly broken up into smaller blocks
Compaction is required more frequently

25. Dynamic Partitioning Allocation

26. Buddy System
A reasonable compromise to overcome the disadvantages of both the fixed and dynamic partitioning schemes
Entire space available is treated as a single block of 2U
If a request of size s where 2U-1 < s  2U
entire block is allocated
Otherwise block is split into two equal buddies
Process continues until the smallest block greater than or equal to s is generated

27. Buddy System Example

28. Buddy System Tree Representation
A binary tree representation of the buddy allocation immediately after the Release B request
The leaf nodes represent the current partitioning the memory

29. Relocation
The actual (absolute) memory locations are determined when program is loaded into memory
A process may occupy different partitions which means different absolute memory locations during execution
Swapping
Compaction

30. Addresses Logical Physical or Absolute
Reference to a memory location independent of the current assignment of data to memory
A relative address is expressed as a location relative to some known point (typically the program origin)
Physical or Absolute
The absolute address or actual location in main memory
A translation must be made from a logical address to a physical address before memory access can be achieved

31. Relocation Hardware Support
1. Add the value in the base register to the relative address to produce an absolute address
0. Initialize base and bounds registers when a process is assigned to the Running state
2. Compare the resulting address to the value in the bounds register

32. Relocation Registers Used during Execution
Base register
Starting address for the process
Bounds register
Ending location of the process
These values are set when the process is loaded or when the process is swapped in

33. Relocation Registers Used during Execution
The value of the base register is added to a relative address to produce an absolute address
The resulting address is compared with the value in the bounds register
If the address is within bounds, instruction execution may proceed
Otherwise, an interrupt indicating error is generated to OS

34. Paging
Partition memory into small equal fixed-size chunks (frames) and divide each process into the same size chunks (pages)
Pages of process could be assigned to available frames of memory
No external fragmentation but little internal fragmentation consisting of only a fraction of the last page of a process

35. Paging Processes and Frames
OS finds free frames and loads the pages of Process A, B & C
Process B is suspended and is swapped out of main memory
All of the processes in main memory are blocked, and OS brings in Process D
A.1
A.2
A.3
B.0
D.0
B.1
D.1
B.2
D.2
C.0
C.1
C.2
C.3
D.3
D.4

36. Paging
Operating system maintains a page table for each process which contains the frame location for each page in the process
Given a logical address (page number, offset), the processor uses the page table to produce a physical address

37. Paging Page Table
page number
frame number

38. Paging Logical Addresses
Using a page size that is a power of 2, a logical address (page no., offset) is identical to its relative address
Example
16-bit address
210 =1024-byte page
10-bit offset
6-bit page number
A maximum of 26 =64 pages

39. Paging Logical to Physical Address Translation
Consider an address of n+m bits, where the leftmost n bits are the page no. and the rightmost m bits are the offset
1. Extract the page no.
2. Use the page no. as an index into the process page table to find the frame number, k
3. The physical address is constructed by appending the offset to k

40. Segmentation A program can be subdivided into segments
Segments may vary in length
There is a maximum segment length
Segmentation is similar to dynamic partitioning
But, a program may occupy more than one partition
No internal fragmentation but suffers from external fragmentation (as does dynamic partitioning)

41. Segmentation A logical address consists of two parts
a segment number and
an offset
There is a segment table for each process and a list of free blocks of main memory.
Each segment table entry would have to give
the starting address in main memory of the corresponding segment.
the length of the segment, to assure that invalid addresses are not used.

42. Segmentation Logical Addresses
There is no simple relationship between a logical address (segment no., offset) and the physical address
Example
16-bit address
12-bit offset
4-bit segment number
maximum segment size= 212=4096

43. Segmentation Logical to Physical Address Translation
Consider an address of n + m bits, where the leftmost n bits are the segment no. and the rightmost m bits are the offset
3. If the offset  the length of the segment, the address is invalid
1.Extract the segment no.
4.The physical address is the sum of the starting physical address of the segment plus the offset
2.Use the segment no. as an index into the process segment table to find the starting physical address of the segment