1. Notes for Lab 10 On implementing ‘show’ and ‘hide’ for the SiS 315 hardware cursor

2. The GPU resources The SiS 315 graphics processing units in our workstations are each equipped with 32-megabytes of video display memory (designated as PCI resource 0) These graphics adapters also implement a set of memory-mapped registers known as the 2D graphics engine (and designated as PCI resource 1)

3. ‘pci_resource_start()’ Device-drivers can use this Linux kernel function to discover the physical address where resource 0, or resource 1, resides struct pci_dev*devp = NULL: devp = pci_find_device( VEN, DEV, devp ); vram = pci_resource_start( devp, 0 ); mmio = pci_resource_start( devp, 1 );

4. SiS 315 information Programming manual for the SiS 315 GPU is not usually made available to the public But some information can be derived from reading Linux device-driver source-code Examples are: –The ‘/usr/src/linux/drivers/video/sis’ directory –Also download the ‘svgalib-1.9.17’ package

5. Graphics Cursor cursor-image source-offset 31 300 0x8500 cursor visibility control bit: 0=hide, 1=show cursor-image horizontal coordinate 0x850C 0x8510 cursor starting command bit: 0=no, 1=yes cursor-image vertical coordinate

6. Algorithm to hide cursor Map physical page containing the registers to a virtual address (with ‘ioremap()’) Read current values of these registers Clear bit #30 (to make cursor invisible) Set bit #31 (to initiate a new command) Write these adjusted register values Undo the mapping (with ‘iounmap()’)

7. Algorithm to show cursor Map physical page containing the registers to a virtual address (with ‘ioremap()’) Read current values of these registers Set bit #30 (to make cursor visible) Set bit #31 (to initiate a new command) Write these adjusted register values Undo the mapping (with ‘iounmap()’)

8. The ‘ioctl.c’ module These techniques are demonstrated in this device-driver module’s ‘ioctl()’ function Two IOCTL commands are implemented –#define CURSOR_HIDE0 –#define CURSOR_SHOW1 Applications can open the device-file, then use an ioctl-command; for example: int fd = open( “/dev/vram”, O_RDWR ); ioctl( fd, CURSOR_HIDE);

9. In-class exercise: Try adding new IOCTL commands to the ‘ioctl.c’ driver which lets applications find or move the cursor’s screen-position; #define CURSOR_FIND2 #define CURSOR_MOVE3 struct { long x, y; } location; ioctl( fd, CURSOR_FIND, &location ); location.x += 40; location.y += 40; ioctl( fd, CURSOR_MOVE, &location );