1. How to Patch an APC Campbell Company

2. Extract Zip file and open folder for patch Double Click on ips text file

3. Make sure the IP address matches the APC you are going to Patch Save file

4. If you have not patched the APC before you may need to validate the key To do this Double click on Putty

5. Type in the APC’s IP address and click open Click yes when prompted by the security key Close out of the session

6. Now you are ready to patch Double click on patch (the Batch file) When done, you will need to either power cycle the APC or double click on reboot at the bottom of the files